Click that and set your password. When away from the house start the SL app and click the "Remote" button - it will open up the login screen. Enter your identifier like Pentair: XX-XX-XX in the name field and your password in the password field and you'll be connected while away from the house.
- Demo system name is: Pentair: 00-00-00.
- Password is: guest.
How to connect Pentair to screenlogic?
You can download the remote 1. After installing the “ScreenLogic Connect” utility, click the program. 2. Enter your ScreenLogic system name in the “System Name” box. The name must be entered as follows: Pentair: xx-xx-xx Adapter. 3. In the “Password” box, enter the system password that you “General Settings (step 1 of 5)” dialog box.
How do I set a password for remote access to screenlogic?
Jim has you headed in the right way. Once you click on "Configure Screenlogic" on the first screen, you'll click the larger "Configure Screenlogic" on the second screen. On the "General Settings (1 of 5)" page there is a button near the bottom of that page "Set Remote Access Password".
How to configure Wi-Fi and network in Pentair Intellicenter?
First, in the interface of your Pentair intellicenter, go to Settings. Scroll down to the bottom until you find Pentair User Portal. Then go to Web & Mobile interface section. Make sure you have turned on the mobile interface. After that go to Advanced System Configuration and then network and Wi-Fi setup.
How to connect your computer to screenlogic?
computer over the Internet or from your local networked computer in your house. You can download the remote 1. After installing the “ScreenLogic Connect” utility, click the program. 2. Enter your ScreenLogic system name in the “System Name” box. The name must be entered as follows: Pentair: xx-xx-xx
How do I find my Pentair password?
1:152:48Pentair Home App Forgetting and Changing Your Password - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn forgot your password no worries here's how to request a new one go to login screen click onMoreIn forgot your password no worries here's how to request a new one go to login screen click on forgot password enter your email id enter the verification.
How do I connect to Pentair remotely?
When away from the house start the SL app and click the "Remote" button - it will open up the login screen. Enter your identifier like Pentair: XX-XX-XX in the name field and your password in the password field and you'll be connected while away from the house.
How do I use Pentair app remotely?
0:181:49Pentair Home App- Remote Monitoring by Professional - YouTubeYouTubeStart of suggested clipEnd of suggested clipAccess at any time through the product settings menu to request remote monitoring by a local waterMoreAccess at any time through the product settings menu to request remote monitoring by a local water professional click on remote monitoring. Option in the product settings.
How do I connect my Pentair Screenlogic?
0:0410:16ScreenLogic®- iPad Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's go to the app store and search for pintair screen logic. Now select the screen logic configMoreSo let's go to the app store and search for pintair screen logic. Now select the screen logic config app. And once it is installed tap the open. Button.
Can't connect to Screenlogic?
The simple solution was insert a paperclip into the reset hole on the side of the protocol adapter and click the internal reset button three (3) times. That's right, not just once, but click the reset button 3 times. I waited 30+ seconds, then opened up the Screenlogic Connect software.
How do I connect my Pentair app to my WiFi?
0:172:25How To Connect Pentair IntelliCenter To a Wireless Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipNetwork so what we're going to do first is go to settings. And then i'm actually going to go down toMoreNetwork so what we're going to do first is go to settings. And then i'm actually going to go down to pentair user portal what you want to make sure is enable web and mobile interfaces on.
Does Pentair work with Alexa?
Amazon's Echo “Alexa” assistant and the Pentair ScreenLogic2 interface now work together to support the IntelliTouch and EasyTouch Control System to help you voice control your daily pool and spa operations, such as, setting the perfect pool or spa temperature…from any room in your house, and with no typing required.
How do I reset my Pentair protocol adapter?
You can use a paper clip to reset the Protocol Adapter by pressing the recessed reset button. You canunplug and plug back in the wireless router to reset it.
How do you turn on the spa with the Pentair app?
0:396:56Pentair Intellicenter Smart Phone Pool and Spa Control App - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the same thing that we just went over as the panel we're going to select pool at the veryMoreThis is the same thing that we just went over as the panel we're going to select pool at the very top. You see your pool. And your spa mode down here at the bottom as.
How do I connect my Pentair Intelliconnect?
1:523:02IntelliConnect™ Control and Monitoring System - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen your smartphones web browser and in the address bar type the address 192.168. 1.1. This willMoreOpen your smartphones web browser and in the address bar type the address 192.168. 1.1. This will take you to the pairing. Page. Select your home router from the drop-down list titled SSID.
Why does my Pentair app say offline?
If your system shows “Offline”, it means that your system has been disconnected from WiFi for over 60 minutes. Offline status may interrupt notifications and data exchange between the sensor and the app. Once WiFi connection has been restored, your Pentair Home app will automatically reconnect the sensor.
How do I connect my Pentair IntelliCenter?
1:092:51The IntelliCenter™ Control System for Pool and Spa- Wireless ConfigurationYouTubeStart of suggested clipEnd of suggested clipAdvanced system configuration. And then network and Wi-Fi setup tap connect to a wireless networkMoreAdvanced system configuration. And then network and Wi-Fi setup tap connect to a wireless network and wait for your home network to be displayed. Select your home network. And enter the password.
Does ScreenLogic work with IntelliCenter?
Screenlogic is an add on to the EasyTouch but the new IntelliCenter comes with a build in control system that is used in place of ScreenLogic.. So you can have an EasyTouch with ScreenLogic, or you can have an IntelliCenter..
What is ScreenLogic2 interface?
The ScreenLogic2 Interface allows you to control the key functions of a pool or spa using the IntelliTouch® and EasyTouch® control systems, through controllers such as an iPad®, iPhone®, iPod touch® mobile digital device, and Mac® computers.
What is the screen logic skill?
Pairing your Amazon Echo™, or similar devices, with the ScreenLogic Skill makes managing your pool or spa environment easier than ever. This cutting-edge technology lets you control the functions of your pool or spa with just the sound of your voice. Watch the video to see how simple it is to use this powerful, hands-free automation.
How to contact Crestron?
There are a lot of variables in systems such as Crestron and other home automation systems. Please call our Tech-Support Hotline at 800-831-7133 and follow the prompts to Automation and one of our technicians will be happy to help answer your questions.
Can you monitor your pool with an Apple Watch?
Now, you can monitor and operate your backyard oasis on the go with the world’s first wearable pool and spa automation interface. Combine your Apple Watch® with the ScreenLogic Interface for customizable, intuitive control that’s as mobile as you are and in sync with your busy life.
Is Pentair compatible with Catalina?
*Note: The Pentair ScreenLogic Interface for Macintosh Desktop Computers is NOT COMPATIBLE with the recently released 64bit speed Macintosh CATALINA Operating System. Customers who update their Mac Desktop Computers to the new Catalina MacOS will no longer be able to use ScreenLogic Desktop Interface. This change DOES NOT affect iPhone, iPad, Alexa or any other ScreenLogic Interfaces. Only Mac computer desktops with ScreenLogic who update to the new Catalina OS.
