How do I remote access my Plex server?
Remote Access. Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
Why is my Plex server not available outside my network?
If you enable remote access to your Plex Media Server and see an error message like “Not available outside your network”, then you have a little trouble shooting to do. It’s important to note that the Plex Media Server can still reach the internet (the server is signed in), but the Plex system can’t access your Plex server from the outside.
Why does Plex use port 32400 for remote access?
Thank you, sa2000. For those keeping track at home. The Port forwarding rules were established on the router for port 32400, a rule to open that port was added to windows firewall on the Plex server, Plex remote access was manually set to use port 32400 and then both the router and the Plex server were rebooted.
How to manually change port number in Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial). Check “Manually specify public port”. Unless you have a pressing reason to do so, there’s no need to change the port number here.
Does Plex require UPnP?
Plex Media Server generally works, by the magic of UPnP, right out of the box.
How do I activate Plex remotely?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
How do I access Plex without port forwarding?
Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!
Does Plex need a static IP?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
Why can't I access my Plex server remotely?
Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General. Go to Settings > Server > Remote Access. If needed, toggle the Show Advanced button to ensure the appropriate options are visible. Enable the Manually specify public port checkbox.
Why can't I access my Plex server?
Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router. Disable any proxies being used on your computer or router. Make sure you aren't requiring secure connections on the server while using an app that doesn't support them (see below)
Which port should I use for Plex?
TCP: 32400The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
Can't connect to Plex after update?
Ensure you have the current version of Plex Media Server installed. Ensure that Plex Media Server is actually actively running. Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router.
Is remote access Plex safe?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Is it safe to open port for Plex?
Yes, port forwarding Plex is safe. Just make sure your internet connection is secured with AES 256-bit encryption for optimal online privacy and security.
How do I access Plex server from another computer?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
How do I use my phone as a remote for Plex?
An Android, Windows Phone 8, BlackBerry or Java mobile device....Setup is quick and simple!Step 1: Install Vectir PC Server. ... Step 2: Install Vectir Mobile Client App. ... Step 3: Install Plex Remote Profile. ... Step 4: Connect and control Plex!
How do I access someone else's Plex server?
Granting AccessUsername or Email. Enter the username or email address for the Plex account you wish to grant access and click continue. ... Select the Server. Plex Media Servers associated with your Plex account will be available. ... Set Restrictions and Inviting to Home (Plex Pass required) ... Pending Access.
How do I get my Plex to work with VPN?
It's a simple process. Once you've successfully configured your Plex server, go to Settings, click Remote Access, and then hit the Enable Remote Access button. The server will use NAT-PMP or UPnP to automatically configure a connection via your router.
What to do if remote access is disabled?
If Remote Access is currently disabled, then use the Enable Remote Access button to trigger your server to try to configure a connection. The server will attempt to automatically configure a connection through your router using UPnP or NAT-PMP first.
What port do you forward plex media server to?
If you are manually forwarding a port, set that forward up beforehand and make sure you know the external port number which you are forwarding (remember that you need to forward the external port you choose to internal port 32400 for the internal IP address of the device running Plex Media Server)
How fast can you upload a stream?
For instance, you might decide that you don’t want any individual remote stream to go over 4 Mbps, even if you have a higher total internet upload speed and allow multiple streams.
Does Plex Media Server allow remote access?
The information displayed by default will depend on the current state of the Plex Media Server. Unless disabled, your Plex Media Server will attempt to set up Remote Access for you.
Does Plex Media Server require a Plex Pass?
Tip!: This feature requires an active Plex Pass subscription for the Plex Media Server admin Plex account.
Why is Plex not working?
There are many instances where several bugs are induced into the Plex application which causes it not to work as expected. Software all around us get updates every once in a while and sometimes these updates are not compatible with Plex. Hence its engineers roll out an update targeting this issue solely.
Why is Plex server error?
This usually occurs because Plex is a heavy application with numerous parameters going on simultaneously. If any one of these gets into an error state or load a bad configuration, it might be unusable.
Why does Plex Media Server buffer?
This scenario usually occurs when your internet connection is not sound which forces the server to use less bandwidth in order to provide access to the media.
What is plex media?
Plex is a client-server media stream and software suite. It has a Plex Media Server desktop application which is available on Windows, Ubuntu, and macOS. This applications allows you to organize different media files in your computer and allows players over the internet to access them if given the correct credentials.
How to check IPconfig status?
You can check the status of ipconfig in a Command Prompt, or head to System Preferences > Network on a Mac.
What happens if you don't have a stable internet connection?
The same scenario also applies to the requesting computer; if you do not have a stable internet connection, you will not be able to request and stream media efficiently. First, you should check the number of devices running on your network (both the server and requesting computer).
Does a plex router need NAT?
If these are not enabled or have different configurations set than required, Plex Remote Access will not work.
How to check if Plex is disabled?
While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.
How to set up static IP address on Plex?
You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.
What happens if you don't set up a static IP address?
If you don’t do this every time your router assigns a new internal address to the media server it will break your port forwarding rule. If you need more information on setting up a static IP address you can search for documentation for your specific router and read up on static IP addresses here.
What happens when you double up a NAT system?
When a NAT system is doubled up with another NAT system, however, it can create issues for apps (like the Plex Media Server) that rely on UPnP to create automatic port forwarding rules. This occurs commonly when you have a router/modem combo supplied by your ISP and your own router plugged into that unit.
How to port forward on Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).
What does it mean when a server says "Not available outside network"?
If your server is currently not configured for remote access, it will say “Not available outside your network” as seen above. Click the large orange button that reads “Enable Remote Access”.
What does the control panel indicate on Plex?
In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.
The Problem
It appears that the majority of Plex clients on my network were considering the server to be a “remote” server, and so were setting bandwidth restrictions on playback.
Plex Server Setup
I run my Plex instance in a Docker container, and there are two ways currently set up to access it:
Why do clients think the server is Remote?
When I started writing this up, there was a much more hacky solution involving custom DNS entries for <my id>.plex.direct records which solved this part. However it appears the solution was much more simple.
