Login to your Plex Web App. Go to Settings > Server > General. Then click Remote Access.
Full Answer
How to manually open a port on a router using Plex?
Click “Apply”. If you don’t see the manual port option in your settings, you need to click on the “Show Advanced” button in the upper right navigation bar. Once you’ve turned on the option in Plex, it’s time to access your router’s admin page.
How to enable remote access on Plex Media Server?
If you want to enable remote access on Plex, a specific port needs to be opened on your router to allow the traffic to flow correctly. Most people will not run into issues trying to enable Remote Access with their Plex Media Server.
Why is my Plex server not available outside my network?
If you enable remote access to your Plex Media Server and see an error message like “Not available outside your network”, then you have a little trouble shooting to do. It’s important to note that the Plex Media Server can still reach the internet (the server is signed in), but the Plex system can’t access your Plex server from the outside.
How does Plex handle connection data?
The Plex system automatically handles all the connection data as long as you are logged into the same Plex account on your media server and all your client devices. If you’re having issues, however, don’t worry–in the next section we’ll look at the most common issues and how to solve them.
What port should I use for Plex remote access?
WAN/External Port: Port 32400 (TCP) is default, but you can generally use any available port in the 20,000 to 50,000 range. LAN/Internal Port: This will always be 32400. IP Address: The local IP Address of the computer running the Plex Media Server.
Can you access your Plex server remotely?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
How do I access Plex without port forwarding?
Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!
Why can't I access my Plex server remotely?
NAT/UPnP Compatibility: Either NAT or UPnP (depending on your router model) need to be enabled in order for port forwarding to work properly. If these are not enabled or have different configurations set than required, Plex Remote Access will not work.
Is it safe to expose Plex to internet?
Things like 32400 for Plex are just a way for traffic to flow directly between the servers. Since Plex isn't providing any general access to your server on that port (like a login) it's generally considered safe.
How secure is Plex remote?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Does Plex need a static IP?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
What is Plex relay?
What is Relay? In a nutshell, if your app isn't able to make a direct connection to your Plex Media Server when you're away from home, we can act as sort of a middle man and “relay” the stream from your server to your app.
How do I change my Plex port?
1:2812:15Plex - How to Port Forward - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to click on the left hand side connect. Click show advanced and you're going to seeMoreYou're going to click on the left hand side connect. Click show advanced and you're going to see your connection settings here and you have an option to manually specify a port or do set it up
Does Plex require UPnP?
Plex Media Server generally works, by the magic of UPnP, right out of the box.
How do I access Plex server from another computer?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
How do I get my Plex to work with VPN?
It's a simple process. Once you've successfully configured your Plex server, go to Settings, click Remote Access, and then hit the Enable Remote Access button. The server will use NAT-PMP or UPnP to automatically configure a connection via your router.
How do I access Plex server from another computer?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
How do I access someone else's Plex server?
Granting AccessUsername or Email. Enter the username or email address for the Plex account you wish to grant access and click continue. ... Select the Server. Plex Media Servers associated with your Plex account will be available. ... Set Restrictions and Inviting to Home (Plex Pass required) ... Pending Access.
How do I access my Plex Media Server?
Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the Server and load Plex Web App.
What is the IP address of my Plex server?
Find out the local IP address of the device on which the app is running. You will typically be able to find this in the device's system settings. In your Plex Web App, go to Settings > Server > Network .
How to check if Plex is disabled?
While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.
How to set up static IP address on Plex?
You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.
How to port forward on Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).
What does the control panel indicate on Plex?
In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.
Can you use Plex Media Server on a TV?
If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access. RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)
Can you watch Plex on your phone?
One of the greatest things about the Plex Media Server platform, however, is the ease with which you can access your media from anywhere. With remote access enabled and properly configured, you can watch your favorite TV shows anywhere you have internet access: on your phone while you’re sitting in a waiting room, on your laptop while you’re vacationing, or even on a smart TV at a friend’s house.
Can you disable remote access on Plex?
During the initial setup of the Plex Media Server, the setup wizard prompts you to enable or disable remote access. While the default state is enabled, you may have opted at the time to disable remote access, or perhaps you inadvertently disabled it while messing around with the system settings later on. Regardless, it’s easy enough to check the status of remote access and enable it if it is currently disabled.
Description
This custom component has been designed to for Home Assistant and enables access to the functions that would be useful in the Home Assistant environment.
Setup
When setting up the integration you will be asked for the following information.
Configurable Options
It is possible to configure the following options for the integration.
Troubleshooting
Debug logging can be enabled in Home Assistant using the logger integration see here.
Card 1
This card is used mainly to work around a limitation in Button Card documented here.
