Login to your Plex Web App. Go to Settings > Server > General. Then click Remote Access.
Full Answer
Should you remotely access Plex Media Server?
If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access.
What ports do I need to connect to Plex?
WAN/External Port: Port 32400 (TCP) is the default, but you can generally use any available port in the 20,000 to 50,000 range. LAN/Internal Port: This will always be 32400. IP Address: The local IP Address of the computer running the Plex Media Server. This is what you did above.
How to get Plex to use the correct public Wan?
Running plex on a windows server and have assigned a static IP for it. Setup port forwarding to 32400. Have also tried UpnP in the router, and then switched back to manual port forwarding when that didn't work. Have reset the server and rebooted the system numerous times. However, can still not get plex to use the correct public wan.
How do I find the IP address of my Plex server?
If you are running your Plex Server on a Windows machine, you can find its IP address by opening up network properties. Once you have the properties open and can scroll down and your should see a few properties of your network, one of them will be your IPv4 Address.
Why can't I access my Plex server remotely?
Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General. Go to Settings > Server > Remote Access. If needed, toggle the Show Advanced button to ensure the appropriate options are visible. Enable the Manually specify public port checkbox.
Do I need a static IP for Plex?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
How do I access Plex without port forwarding?
Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!
Does Plex remote access work with a VPN?
Does Plex Work with a VPN? Yes, Plex can be used with VPNs. However, you shouldn't settle for any provider as not all of them support Plex. PureVPN, on the other hand, is fully compatible with the media center and empowers you to enjoy a private, throttle-free, and limitless streaming experience!
What IP addresses does Plex use?
NAS Devices Type http://[Plex Media Server IP Address]:32400/web (e.g. http://192.168.1.25:32400/web) The browser will connect to the Plex Media Server and load Plex Web App.
How do I enable remote access on Plex?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
How secure is Plex remote?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Does Plex use TCP or UDP?
The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
What is Plex relay?
What is Relay? In a nutshell, if your app isn't able to make a direct connection to your Plex Media Server when you're away from home, we can act as sort of a middle man and “relay” the stream from your server to your app.
Can I get in trouble for using Plex?
Plex is perfectly legal whenever you're streaming from their server or whenever you upload personal media that was acquired and reproduced legally. On the other hand, the user can put illegally obtained content on their personal media server.
How do I get Plex to work on NordVPN?
To make this possible, you'd need to set up NordVPN on a supported router. Once you have NordVPN running on your router, you can connect the device with your Plex server setup to the router, and any traffic transferred over the connection will be behind a NordVPN server.
Can you bypass VPN?
You can often bypass a VPN block by switching servers or going to a different VPN provider. The organization blocking your access may have focused on only the more popular VPNs when choosing what to block, so you may be able to gain access using a less popular service.
How do I assign a static IP address to my computer?
How to Set a Static IP AddressAccess the Control Panel. In the Windows search bar, type in “ncpa. ... Select the Network Adapter. ... Select Properties. ... Select Internet Protocol Version 4 (TCP/IPv4) ... Manually enter IP address and subnet mask. ... Save Settings. ... Revert Back to DHCP.
How do I share my Plex server with friends?
Enter the username or email address of the person you want to share your library with, and click on the user when it pops up. In the next window, choose which libraries you share with others. To share all of them, select your server and click Save. Or select only the libraries you want to share, then click Save.
What is myPlex?
The Plex cloud services – we've called them myPlex – are designed to do three things to help make your lives easier: 1) An incredibly easy way for you to access your media remotely. One of the most common support questions we get involves connecting a mobile device to media stored at home.
How to find IP address of Plex server?
If you are running your Plex Server on a Windows machine, you can find its IP address by opening up network properties. Once you have the properties open and can scroll down and your should see a few properties of your network, one of them will be your IPv4 Address.
How to get around static IP?
In general there are two ways to go about doing this: 1) You can tell your server to request that the router assign it a certain IP address when it asks for one. If the address is not already taken, the router should comply with the request. Or 2) tell the router to reserve a specific IP address for your server, which mean that it will always give the server the same IP address and never give that address out to anything else. The second way is preferable if your router allows it (which it should). Each router does this a little differently. We are going to go over doing this for a Netgear router, but other router generally should have a similar process.
What does a local device do when it is connected to the internet?
When a device on your local network wants to communicate with the internet (check email, view a webpage, or stream Plex to a remote device), the local device will talk to the router which will in turn use the public IP address to talk to the outside world.
What port is 32400?
This command will scan all IP address on your network and check if port 32400 is open. Plex uses port 32400 so it should only be open on your server. You should see the IP addresses of the devices on your network listed out. Most of them will say that port 32400 is closed.
How does a router assign an IP address?
When a new device connects to your local network, it will be assigned an IP address by your router, usually with the DHCP protocol (The details of this aren't important). What is important is that IP addresses are assigned dynamically (The D in DHCP). This means that the router can pick whatever IP address that it wants to give to the device, as long as its not already assigned to a different device. The router does not always have to give the same device the same IP address.
What is an IP address?
An IP Address is a way to identify a device on your network. There are times when it is important to known what the IP address of your Plex Server is in order to communicate with it and send it messages. For instance you may need to know your Plex Server's IP in order to SSH into it and update it. First some background on IP addresses in general.
What is the IP address of a router?
The router is assigned a public IP address ( Red) by your Internet Service Provider (Cox, Verizon, Comcast, CenturyLink, etc). Your router can communicate with the internet using that IP address. When you connect a device to your local network, it is assigned a local IP address (Blue) by your router. This IP address is only meaningful inside your local network.
How to set up static IP address on Plex?
You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.
How to check if Plex is disabled?
While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.
What happens if you don't set up a static IP address?
If you don’t do this every time your router assigns a new internal address to the media server it will break your port forwarding rule. If you need more information on setting up a static IP address you can search for documentation for your specific router and read up on static IP addresses here.
How to port forward on Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).
What does it mean when a server says "Not available outside network"?
If your server is currently not configured for remote access, it will say “Not available outside your network” as seen above. Click the large orange button that reads “Enable Remote Access”.
What does the control panel indicate on Plex?
In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.
Can you use Plex Media Server on a TV?
If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access. RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)
Why is Plex server error?
This usually occurs because Plex is a heavy application with numerous parameters going on simultaneously. If any one of these gets into an error state or load a bad configuration, it might be unusable.
Why is Plex not working?
There are many instances where several bugs are induced into the Plex application which causes it not to work as expected. Software all around us get updates every once in a while and sometimes these updates are not compatible with Plex. Hence its engineers roll out an update targeting this issue solely.
Why does Plex Media Server buffer?
This scenario usually occurs when your internet connection is not sound which forces the server to use less bandwidth in order to provide access to the media.
What is plex media?
Plex is a client-server media stream and software suite. It has a Plex Media Server desktop application which is available on Windows, Ubuntu, and macOS. This applications allows you to organize different media files in your computer and allows players over the internet to access them if given the correct credentials.
How to find my router's IPv4 address?
Find and note down your router’s External IPv4 address/WAN. You can easily find this in the status page present in your router settings.
How to check IPconfig status?
You can check the status of ipconfig in a Command Prompt, or head to System Preferences > Network on a Mac.
What happens if you don't have a stable internet connection?
The same scenario also applies to the requesting computer; if you do not have a stable internet connection, you will not be able to request and stream media efficiently. First, you should check the number of devices running on your network (both the server and requesting computer).
