Full Answer
Why isn’t Plex remote access working?
There are situations where a ‘double’ NAT occurs which causes a lot of issues and causes Plex Remote Access not to work. Outdated Plex Version: Plex Media Server releases frequent updates every now and then to fix bugs or introduce new features into the application.
What is the best port number for Plex remote access?
The big secret here is proper port forwarding for plex remote access! Keep in mind that internal port should always be 32400 and External port is set to the top of the range at 50000. Also when setting a static IP to your Plex Media Server it is always recommended to restart your device...
How to fix Plex Media Server won’t turn on?
Take out the power cable of each computer. Now press and hold the power button of each computer for around 4 seconds so all the energy is drained. Now, wait 2-3 minutes before plugging everything back in. Now start your computer again and launch the Plex media server.
Why isn’t my port being forwarded automatically for Plex?
If the port isn’t being forwarded automatically, we have no option other than manually forwarding the port which Plex will use. Usually, the need for manual port forwarding arises when uPnP or NAT-PMP is not enabled on your router. This method is quite straightforward and isn’t as intimidating as it seems.
Why does Plex remote access keep dropping?
IPs Being Blocked In some cases, you may have a firewall or something else on your computer/network that may be blocking a network connection that's required for Plex and your server to test whether Remote Access is working correctly for you.
Why can't I access my Plex server?
Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router. Disable any proxies being used on your computer or router. Make sure you aren't requiring secure connections on the server while using an app that doesn't support them (see below)
Does Plex require UPnP?
Plex Media Server generally works, by the magic of UPnP, right out of the box.
How do I access Plex without port forwarding?
Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!
Does Plex need a static IP?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
Is Plex legal?
Plex is perfectly legal whenever you're streaming from their server or whenever you upload personal media that was acquired and reproduced legally.
Should I enable DLNA on Plex?
DLNA server timeline reporting Allow playback via DLNA to report timeline activity. This means that the Plex Media Server will track the current progress through the item. This should typically be enabled.
What port should I use for Plex?
TCP: 32400The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
How do I get Plex direct connection?
Enable Remote Access That direct connection will allow the apps to stream at higher qualities and the connection will be more efficient. You can find the Remote Access area under Settings > Server > Remote Access in the Plex Web App. In many cases, everything will work automatically.
What does Plex remote access do?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
Is remote access Plex safe?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Does UPnP work with port forwarding?
Universal Plug and Play (UPnP) is a network protocol that allows compliant devices to automatically set port forwarding rules for themselves. These devices can be personal computers, printers, security cameras, game consoles or mobile devices that communicate with each other and share data over your network.
Is UPnP safe?
UPnP, therefore, is not inherently dangerous if your router is up to date and has all the latest firmware updates, and your connected devices are free of malware. UPnP becomes an issue if a connected device is infected with malware, as it can spread to your local devices.
How do I add UPnP to my router?
To enable or disable Universal Plug and Play:Launch a web browser from a computer or mobile device that is connected to your router's network.Enter the router user name and password. The user name is admin. ... Select ADVANCED > Advanced Setup > UPnP. The UPnP page displays.Select or clear the Turn UPnP On check box.
What is UPnP service?
UPnP (Universal Plug and Play) is a networking protocol that enables devices to discover each other and connect without the need for manual configuration or user intervention. The protocol automates all the steps necessary for recognition and communication between devices on the same network.
Why is Plex not working?
There are many instances where several bugs are induced into the Plex application which causes it not to work as expected. Software all around us get updates every once in a while and sometimes these updates are not compatible with Plex. Hence its engineers roll out an update targeting this issue solely.
Why is Plex server error?
This usually occurs because Plex is a heavy application with numerous parameters going on simultaneously. If any one of these gets into an error state or load a bad configuration, it might be unusable.
Why does Plex Media Server buffer?
This scenario usually occurs when your internet connection is not sound which forces the server to use less bandwidth in order to provide access to the media.
What is plex media?
Plex is a client-server media stream and software suite. It has a Plex Media Server desktop application which is available on Windows, Ubuntu, and macOS. This applications allows you to organize different media files in your computer and allows players over the internet to access them if given the correct credentials.
What happens if you don't have a stable internet connection?
The same scenario also applies to the requesting computer; if you do not have a stable internet connection, you will not be able to request and stream media efficiently. First, you should check the number of devices running on your network (both the server and requesting computer).
Does a plex router need NAT?
If these are not enabled or have different configurations set than required, Plex Remote Access will not work.
Does Plex update itself?
Normally, Plex’s web application updates itself over time as you use it. The case is different in case of Ubuntu or other platforms where Plex is running. Below is the method on how to update Plex on an Ubuntu machine. You can easily google other methods for updating if you have it running on another platform.
spikes2020
Edit: I solved it by turning on UPnP...... but it now cuts out after 30 second to 1 min unless i am watching a video then it seems to last longer... is there a time out thing i need to disable and how?
mfwade
I at one time had the same issue. Found multiple instances on other forums that stated it was a bug. Even when it was red, it still worked.
spikes2020
I at one time had the same issue. Found multiple instances on other forums that stated it was a bug. Even when it was red, it still worked.
mfwade
By chance, do you have geolocation filtering on? If so, allow Ireland through. Plex remote/proxy servers are located there and for whatever reason it needs to be able to communicate with them.
spikes2020
By chance, do you have geolocation filtering on? If so, allow Ireland through. Plex remote/proxy servers are located there and for whatever reason it needs to be able to communicate with them.
spikes2020
By chance, do you have geolocation filtering on? If so, allow Ireland through. Plex remote/proxy servers are located there and for whatever reason it needs to be able to communicate with them.
mfwade
Just following up on this thread. Were you able to get your issue sorted out? Turn off GEOIP FILTERING and see if the problem persisits. I had similar issues even though I was allowing US and Irelend.
Squid
Do you have a modem with a built in router in front of your main router? If you do then you have disable its built in router function on it for plex to be able to communicate to the outside world
Helmonder
I have plex installed. seems like there is a connection to the internet (I can sign in under 'server' - 'general', I can download subtitles , art, etc no problem) but i can't get remote access to work. under 'server' - 'remote access' it says "not available outside your network".
CHBMB
Unraid-->AppleAirPortExtreme (Bridge Mode)--> D-Link DSR-500 (router, UPnP enabled) --> Netgear (Modem - Bridge mode) (don't remember exact model - its what the provider supplied me with).
CHBMB
It seems that router firmware update fixed the issue! (though the previous FW was from 2014 so not that old...)
