Put both routers in the same C block so have them both be 192.168.1.1 and 192.168.1.2 (so long as you can manually assign your router an IP) and then set the second router to bridge mode or adapter mode or whatever and reboot both.
Full Answer
How to configure Plex port for remote access?
Look at the menu choices on the left side of your screen and click on Remote Access. You may have to click the Show Advanced button. Find and check the checkbox to manually specify the port. Make sure the number is correct. The default Plex port is 32400. Click the Apply button.
Can I use plex with two routers?
I have basically the same setup, with the second router setup in my room, and Plex works perfectly on 6+ devices split across the two routers. Thanks. Problem solved Ideally like many here have said, put the 2nd router into AP mode and just use it to send out wifi, but keep everything on the same network.
What is Plex Media Server?
The Plex Media Server is smart software that makes playing Movies, TV Shows and other media on your computer simple.
How do I open Plex on my computer?
First, click on the Plex icon in your browser menu bar. You should now see the home screen of your Plex server. Next, click on the wrench which you will find on the navigation bar at the top of the screen. This will take you to the Plex settings menu.
How do I fix double NAT Plex?
Fixing Double-NAT Possible things to try: The best solution here is usually to contact your internet service provider and ask them to assist you with setting their modem/router to Bridge Mode. You can try putting your own router in to Bridge Mode and let your service provider's modem/router handle NAT.
How do I access Plex without port forwarding?
Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!
Why can't I access my Plex server remotely?
NAT/UPnP Compatibility: Either NAT or UPnP (depending on your router model) need to be enabled in order for port forwarding to work properly. If these are not enabled or have different configurations set than required, Plex Remote Access will not work.
Does Plex need a static IP?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
How do I enable remote access on Plex?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
How secure is Plex remote?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Does Plex use TCP or UDP?
The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
How do I access someone else's Plex server?
Granting AccessUsername or Email. Enter the username or email address for the Plex account you wish to grant access and click continue. ... Select the Server. Plex Media Servers associated with your Plex account will be available. ... Set Restrictions and Inviting to Home (Plex Pass required) ... Pending Access.
Can anyone access my Plex server?
Enter the username or email address of the person you want to share your library with, and click on the user when it pops up. In the next window, choose which libraries you share with others. To share all of them, select your server and click Save. Or select only the libraries you want to share, then click Save.
What IP addresses does Plex use?
NAS Devices Type http://[Plex Media Server IP Address]:32400/web (e.g. http://192.168.1.25:32400/web) The browser will connect to the Plex Media Server and load Plex Web App.
Does Plex need UPnP?
Plex Media Server generally works, by the magic of UPnP, right out of the box.
How do I setup port forwarding on Plex router?
2:3212:15Plex - How to Port Forward - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to go over here to your router. Now you can access your router by typing 192.168. 1.1MoreSo we're going to go over here to your router. Now you can access your router by typing 192.168. 1.1 in your web browser. That's. This that's the main IP address for most routers your router might be
How do I connect to Plex directly to server?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
How do I find my Plex server IP address?
Find out the local IP address of the device on which the app is running. You will typically be able to find this in the device's system settings. In your Plex Web App, go to Settings > Server > Network .
PSA: There's been ongoing connection issues, check Plex status page
Some users are reporting connection issues with Plex (including my server), check https://status.plex.tv/ for status.
I'm going to lose my mind. I CANNOT figure out why I get buffering
I have been having this issue on and off for a while now and it is driving me nuts.
What's the oldest media in your Plex library?
As the title says, what's the oldest media in your Plex library? This is release date, not the date it was added to your library.
Fixing PFSense Plex Indirect connection with Pihole RecursiveDNS via Unbound
Yes, the title is a mouthful. I just went through this and I want to document this down so that other users who face the same setup to mine or closely related could fix their issues.
How to connect to Plex from outside?
In order to have a direct connection from outside your network to Plex you may need to forward a port in your router. After you forward a port in your router, you will then need to specify the port forward in Plex.
What is the default port for plex?
Make sure the number is correct. The default Plex port is 32400. Click the Apply button.
Where is the wrench on plex?
Next, click on the wrench which you will find on the navigation bar at the top of the screen. This will take you to the Plex settings menu.