If you go to Plex’s settings and Remote Access, it will appear as if remote access is not configured. This is because we’re using a reverse proxy. You will be able to access your Plex resources using the domain name you configured above, but it will appear (to Plex) like it cannot be accessed outside of your network.
Full Answer
How to enable remote access on Plex Media Server?
If you want to enable remote access on Plex, a specific port needs to be opened on your router to allow the traffic to flow correctly. Most people will not run into issues trying to enable Remote Access with their Plex Media Server.
How to prevent Plex from pinging over Port 32400?
Deny port 32400 externally (Plex still pings over 32400, some clients may use 32400 by mistake despite 443 and 80 being set). Note adding allowLocalhostOnly="1" to your Preferences.xml, will make Plex only listen on the localhost, achieving the same thing as using a firewall.
What is Plex Pass and how does it work?
Download the Plex app on your mobile devices, TVs and streaming devices to enable easy streaming anytime, anywhere. Free ad-supported live TV and movies are available, but Plex Pass is worth considering if you are a true film lover or an audiophile.
How to make Plex only listen on the localhost?
Note adding allowLocalhostOnly="1" to your Preferences.xml, will make Plex only listen on the localhost, achieving the same thing as using a firewall.
What is reverse proxy Plex?
A reverse proxy lets you forward the correct headers to cause Plex to always interpret your connection as local. Manage SSL on your own. By installing your own SSL certificate into the reverse proxy, you are in control of SSL connectivity to your Plex server.
Does Plex require port forwarding?
Enabling Remote Access to connect your server with plex.tv works best with modern routers that support uPnP or NAT-PMP auto-configuration. These allow an application like Plex Media Server to automatically configure a forwarded port on the router without you needing to do anything.
What port does Plex server use?
TCP: 32400The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
What is Plex relay?
So, your Plex Media Server basically “relays” the media stream through our server so that your app can access it since the app can't connect with your server directly.
Why can't I access my Plex server remotely?
NAT/UPnP Compatibility: Either NAT or UPnP (depending on your router model) need to be enabled in order for port forwarding to work properly. If these are not enabled or have different configurations set than required, Plex Remote Access will not work.
Do you need Plex Pass for remote access?
It's not true. All users can stream remotely providing you've configured your Plex Server correctly. Head to Settings > Remote Access > Enable Remote Access to set it up. In this regard, the Plex Pass is only useful if you're going to be in a place with no internet—it lets you save content directly onto your device.
How do I access Plex from another computer?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
Is Plex remote access secure?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Does Plex need a static IP?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
What is Plex remote access?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
What are Plex Webhooks?
Webhooks are a Plex Pass feature which allows you to configure one or more URLs to get hit by the Plex Media Server when certain things happen. You can use webhooks for any number of purposes: home automation (such as dimming lights when you start playback), posting to Slack or Twitter, and more.
Can Plex use IPv6?
Today I found this post from u/Pikey18 which allows you to reach your Plex server via IPv6 directly and without any tinkering with certificates and what not. The problem: This method works only from an IPv6 network. (Took me some time to figure that out but makes sense when you stop and think about it).
How do I setup port forwarding for Plex?
Here's the process:Opt for a unique port number for each of your Plex Media Servers.Keep in mind that you must use a different WAN/external port for each server connection you wish to have. ... Now forward that selected 'unique external port number' to LAN/internal port 32400.
What is my Plex server address?
Open a browser window. Type http://localhost:8888/web into the address bar. The browser will connect to the Server as if it were local and load Plex Web App.
What is Plex DLNA server?
Your Plex Media Server can function as a DLNA (Digital Living Network Alliance) server in addition to its normal Plex functions. This allows regular DLNA clients to be able to access content from the Server. You can access these preferences under Settings > Server > DLNA in Plex Web App.
What is port forwarding in router?
Port Forwarding sets up public services on your network such as web servers, FTP servers, e-mail servers, or other specialized Internet applications. When users send this type of request to your network via the Internet, the router will forward these requests to the appropriate computer.
A Lifetime Plex Pass costs less than 10 months of Netflix. Ensure Plex's longevity. Buy one
Server hosts especially, but even users, should really look at the value of that. This is a software that has freed me from the constraints of streaming services and effectively removed me as a pawn in the streaming wars - a fight that is solely based on intellectual property.
The new "Downloads" feature: have they taken more away from users without a Plex pass? Bait and switch?
EDIT: /u/bauerknight brought it to my attention that this issue is mostly addressed in the final question of the FAQ. It appears that they will be "grandfathering" in Plex users who were using the old "sync" feature.
After using Unraid for 2 years, this week I learned 'Docker Folders' plugin exists - An awesome way to organize all my containers. What else am I missing out on?
After using Unraid for 2 years, this week I learned 'Docker Folders' plugin exists - An awesome way to organize all my containers. What else am I missing out on?
PSA for those using bitwardenrs container
bitwardenrs/server is deprecated in favour of vaultwarden. Just replace the repository on the template with vaultwarden/server in the advanced tab.
Just had a drive fail
Is there a way to distribute the emulated content across the other disks in the array? I don't necessarily need this disk (old 6TB and 19 disks total), so I'd like to just move the files off on to other disks and remove it from the array.
VPN recommendation for Unraid
I have a VPN provider I have been using for years, but they don’t have certificates and stuff, just a single file. I can get it to work with any of the VPN dockers like privoxyvpn, nzbgetvpn, delugevpn, etc.
Weird Console Text
Noticed a change about two weeks ago, not sure if it is a Firefox update or an Unraid issue. Text is all warped and hard to read on any console, for unraid or dockers. Seems fine in Chrome and Edge, so leaning towards Firefox but just wanted to see if anyone else is having the issue.
