Port 8080 used to be the default port Sighthound would use for remote access, though it is now 8848. This number can be changed to any port numbers that are not used.
How do I set up port forwarding on my Comcast router?
Comcast Router Port Forwarding 1 Access your router. The first step to configuring port forwarding is accessing your router via your internet browser. ... 2 Find the port forward section. The next step after gaining access is to find the appropriate section for port forwarding. ... 3 Create the port rules. ... 4 Scan the Ports. ...
What is port configuration in Comcast?
Port Configuration. Port configuration rules are used to block or redirect specific traffic passing through from one side of the Comcast Gateway to the other. The traffic is managed by blocking or redirecting certain traffic, based on the port numbers that the traffic is using.
How to access router remotely?
How to Access Router Remotely Part 1: Turn On remote sharing Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Managementoption.
What are the ports on a wireless gateway?
Common port numbers are Port 80 (web servers) and Port 443 for Secure Socket Layer traffic. What is an IP address? Every device connected to your home network is assigned an IP (Internet Protocol) address. Your Wireless Gateway communicates with your network devices by automatically assigning local addresses or IP address, such as 10.0.0.1.
See 5 key topics from this page & related content
How do I access my Comcast modem remotely?
Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
What is the port for Comcast?
To find the port number of the traffic you're looking for, contact the service developer or search online. Common port numbers are Port 80 (web servers) and Port 443 for Secure Socket Layer traffic.
What are the ports on the back of my Xfinity modem?
The port with the red mark is a 2.5Gbps port. It is meant to connect to a device that also supports 2.5Gbps. The other three remaining ports are standard gigabit ports. If the device you are using does not support 2.5 Gbps, then using any of the ports will yield the same transfer speed.
What port does Xfinity router use for bridge mode?
The gateway, when put in Bridge mode, defaults to using exclusively the LAN1 port.
What server does Comcast use?
Setup Your Comcast.net Account with Your Email Program Using IMAPComcast.net (Comcast) SMTP Serversmtp.comcast.netSMTP port587SMTP securitySTARTTLSSMTP usernameYour full email addressSMTP passwordYour Comcast.net password
Is Comcast a pop3 or IMAP?
IMAPWe recommend using IMAP for your Comcast email. POP can cause problems when checking your mail from more than one phone or computer because POP removes the mail from our server and delivers it to your device.
What is the red WAN port on my router for?
The WAN Port is used to connect the router to your internet connection. Your ISP has supplied you with a modem that builds up the internet connection. But to distribute the internet connection through your home network you will need a router.
Why does one Ethernet port have an orange line?
One of the most common reasons behind the blinking of orange light on the Ethernet port is a half-duplex connection. A half-duplex link is a type of connection where data transmission is possible in one direction at a time.
Where does the yellow Ethernet cable go for Xfinity?
Plug the Ethernet cable into the yellow port on the back of the WNR1000 router. Plug the other end of the Ethernet cable into the internet modem or router. Plug the power supply cord into the round socket all the way to the right on the back of the router.
How do I put my Comcast modem in bridge mode?
Toggle Bridge Mode On/OffEnter the default username and password: ... From the left-hand column, select Gateway > At a Glance.Next to Bridge Mode, click Enable.You'll see a message: "WARNING: Enabling Bridge Mode will disable Router functionality of Gateway and turn off the private WiFi network.More items...
Which Ethernet port is the fastest?
There are currently two main speed standards for LAN ports: Ethernet (also called Fast Ethernet,) which caps at 100 megabits per second (or about 13 megabytes per second), and Gigabit Ethernet, which caps at 1 gigabit per second (or about 150 MBps).
Does bridge mode disable LAN ports?
So, if you disable a port in Gateway mode and flip the modem to Bridge mode, then that same port will remain disabled.
How do I open ports on my cable modem?
Type your internal address in the "Local IP Adr" field. Type the port you want to open in the "Start" and "End" port fields. Expand the "Protocol" menu and select "TCP," "UDP" or "Both." Select "Both" if you are unsure.
How do I connect my Ethernet cable to my Comcast router?
To connect via Ethernet Connecting via Ethernet is simple: You just have to plug one end of an Ethernet cable into your computer or device and the other end into the Ethernet port on your Xfinity gateway. There's no need to enter a network name or password.
What is Xfinity router username and password?
This is the Wireless Gateway's administration site. The default settings to open the Admin Tool are: Username: admin. Password: password (case sensitive)
What is the Xfinity router?
If you want to connect more than one device to the Internet, you need a router. When you lease an Xfinity Wireless Gateway, the router is built into it. The Wireless Gateway acts as a modem (connection to the Internet) and a router (connecting multiple devices within the home).
Did Comcast change our IP address?
Turns out that Comcast, in their infinite annoyance, changed our static ip without telling us.
Does pfSense need to see incoming packets?
Right. The pfSense needs to "see" the incoming request. So either it needs to hold the public IP, or the Comcast router needs to forward the packet (e.g. set the pfSense WAN IP as the Comcast DMZ, or set up all the port forwards in the Comcast router also).
Where is Remote Management on Netgear router?
Some routers called it Remote Access and it’s usually found under Advanced Settings. On Netgear router, you can find this option under Settings > Remote Management.
What is the IP address of a router?
8080. So, if your public IP address is 74.12.168.14, then you’ll have to type 74.12.168.14:8080 on the web browser. 1.
How to find which DNS service to choose?
The best way to find, which service to choose, is by checking which service is supported on your router So follow these steps. 1. Login to your router and look for an option that says Dynamic DNS. If it’s not there, then you can download IP updater software from any Dynamic DNS provider.
How to share a router?
Part 1: Turn On remote sharing. Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Management option.
Can I connect an external hard drive to my router?
And finally, you can connect an external hard drive to your router and access it from anywhere.
Can I access my DDNS from my router?
So now that you have set up DDNS and remote access on your router, you can access it from anywhere via the Internet. In case you have an old router here are some tips on how to boost network on your old Wi-Fi
Problem with remote access with SMC router and Comcast
I have a customer with a SMCD3G-CCR Modem/Router with Comcast Business with a static IP. I am trying to setup Sighthound to do remote access (to their security cameras) and am having problems. I understand that Sighthound needs port 8080 and 8848 to work (correct me if I am wrong).
Re: Problem with remote access with SMC router and Comcast
Hi, I have Comcast Business with a Netgear CG3000DCR and have Sighthound working with it. I don't have anything setup to use port 8080 with Sighthound. I did setup port forwarding for 8848 though.
Re: Problem with remote access with SMC router and Comcast
You can change the remote access port number to any free port number in the remote access settings page. Simply highlight the 8848 and enter a different number that is free (9090, 9000, and 9191 are often free). I'd recommend trying out a different port number and see if you can connect from outside the network.
Re: Problem with remote access with SMC router and Comcast
You can change the remote access port number to any free port number in the remote access settings page. Simply highlight the 8848 and enter a different number that is free (9090, 9000, and 9191 are often free). I'd recommend trying out a different port number and see if you can connect from outside the network.
Re: Problem with remote access with SMC router and Comcast
Port 8080 used to be the default port Sighthound would use for remote access, though it is now 8848. This number can be changed to any port numbers that are not used.
