Port 8080 used to be the default port Sighthound would use for remote access, though it is now 8848. This number can be changed to any port numbers that are not used.
How do I set up port forwarding on my Comcast router?
Comcast Router Port Forwarding 1 Access your router. The first step to configuring port forwarding is accessing your router via your internet browser. ... 2 Find the port forward section. The next step after gaining access is to find the appropriate section for port forwarding. ... 3 Create the port rules. ... 4 Scan the Ports. ...
How to access router remotely?
How to Access Router Remotely Part 1: Turn On remote sharing Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Managementoption.
What is port configuration in Comcast?
Port Configuration. Port configuration rules are used to block or redirect specific traffic passing through from one side of the Comcast Gateway to the other. The traffic is managed by blocking or redirecting certain traffic, based on the port numbers that the traffic is using.
How do I connect to my Xfinity wireless gateway?
Your Wireless Gateway communicates with your network devices by automatically assigning local addresses or IP address, such as 10.0.0.1. Visit xfinity.com/myxFi or open the Xfinity app and sign in with your Xfinity ID and password.
How do I access my Comcast modem remotely?
Once logged in, navigate to Advanced > Remote Management. On this page, you will note that Remote Management can be performed via HTTP and HTTPS. Enable whichever option makes sense for your needs, and then you will be able to access your wireless gateway's Admin Tool remotely using the protocol you have specified.
What is the port for Comcast?
To find the port number of the traffic you're looking for, contact the service developer or search online. Common port numbers are Port 80 (web servers) and Port 443 for Secure Socket Layer traffic.
What are the ports on the back of my Xfinity modem?
The port with the red mark is a 2.5Gbps port. It is meant to connect to a device that also supports 2.5Gbps. The other three remaining ports are standard gigabit ports. If the device you are using does not support 2.5 Gbps, then using any of the ports will yield the same transfer speed.
How do I open ports on my Comcast Business Modem?
Access the Comcast Business Gateway Admin Tool (http://10.1.10.1), using a computer or other device that is currently connected to your gateway (either wired or wirelessly). On the Advanced menu, select Port Management. In Enable Port Management, uncheck the Disable all rules and allow all Inbound traffic through.
What server does Comcast use?
Setup Your Comcast.net Account with Your Email Program Using IMAPComcast.net (Comcast) SMTP Serversmtp.comcast.netSMTP port587SMTP securitySTARTTLSSMTP usernameYour full email addressSMTP passwordYour Comcast.net password
Is Comcast a pop3 or IMAP?
IMAPWe recommend using IMAP for your Comcast email. POP can cause problems when checking your mail from more than one phone or computer because POP removes the mail from our server and delivers it to your device.
What is the red WAN port on my router for?
The WAN Port is used to connect the router to your internet connection. Your ISP has supplied you with a modem that builds up the internet connection. But to distribute the internet connection through your home network you will need a router.
Where does the yellow Ethernet cable go for Xfinity?
Plug the Ethernet cable into the yellow port on the back of the WNR1000 router. Plug the other end of the Ethernet cable into the internet modem or router. Plug the power supply cord into the round socket all the way to the right on the back of the router.
Why does one Ethernet port have an orange line?
One of the most common reasons behind the blinking of orange light on the Ethernet port is a half-duplex connection. A half-duplex link is a type of connection where data transmission is possible in one direction at a time.
Is Port Triggering the same as forwarding?
Q #1) Is port triggering and port forwarding the same? Answer: No, they are not the same. Port triggering is the dynamic form of port forwarding as it is used when the user wants to reach out to multiple machines in the network on pre-defined ports, by only using the triggering rule.
Where do I find port forwarding?
To forward ports on your router, log into your router and go to the port forwarding section. Next, enter the port numbers and your device's IP address. Choose a forwarding protocol and save your changes. Note: If you don't see a port forwarding option in your router's settings, you might have to upgrade.
Does Comcast Gateway have firewall?
The default firewall setting on the Wireless Gateway is Low, but you can change your settings to suit your particular needs at any time. To set up a firewall, follow these step-by-step instructions: Connect a laptop, computer or mobile device to your home Internet network and open a web browser.
Does Comcast have a static IP address?
Comcast provides Dynamic and Static IP addresses. An IP address is a unique number assigned to every device on a network. A Dynamic IP address is assigned by the network when a connection to the Gateway device initiates, and changes over time, at any given interval.
How do I open ports on my cable modem?
Type your internal address in the "Local IP Adr" field. Type the port you want to open in the "Start" and "End" port fields. Expand the "Protocol" menu and select "TCP," "UDP" or "Both." Select "Both" if you are unsure.
How do I connect my Ethernet cable to my Comcast router?
To connect via Ethernet Connecting via Ethernet is simple: You just have to plug one end of an Ethernet cable into your computer or device and the other end into the Ethernet port on your Xfinity gateway. There's no need to enter a network name or password.
What is Comcast DMZ?
If you haven't had success in using port triggering or port forwarding to set up a specific WiFi-capable device or service, you can configure a Demilitarized Zone (DMZ) within the Admin Tool or Xfinity xFi for your entire network, or a specific device on your WiFi network.
What is Comcast IP gateway?
With the Comcast IP gateway, you will be able to prevent unauthorized access to or from a private network and block Internet users from accessing private networks connected to the Internet, especially intranets or LANs. The Comcast IP gateway incorporates a stateful packet inspection firewall.
What port do you use to forward traffic?
Users on the Internet will use the public port to connect to the LAN device for which you are creating this forwarding rule. Enter the first port of the port range in the Private port field. The assignable ports are between 1 and 65535. The private port is the port on the LAN PC, where this rule will forward traffic.
What is port forwarding rule?
By defining an inbound rule, port forwarding can open a window so that incoming traffic can be directed to your computer. The rule tells the gateway to direct inbound traffic for a particular service to one local device , based on the destination port number.
What is the port number range for LAN forwarding?
Enter the port number range in the Public port field. The assignable ports are between 1 and 65535. The numbers should match whatever is required for the applicable service being forwarded (for example, http traffic will use port 80 by default). Users on the Internet will use the public port to connect to the LAN device for which you are creating this forwarding rule.
What is a private port?
The private port is the port on the LAN PC, where this rule will forward traffic. Typically this will match the public range, but may differ in some cases. For example, SMTP traffic for email typically uses ports 25 and 110, but the mail server on the LAN can be configured to listen for requests on alternative ports.
What is static port management?
Static IP port management allows you to restrict inbound traffic to computers within your local network by IP address and logical port number.
What port does HTTP use?
Port numbers are assigned to specific network or Internet services: HTTP, or Web, traffic uses port 80 or 8080. HTTPS, or secure, traffic uses port 443. SMTP and POP, or e-mail, traffic use ports 25 and 110.
What port number is used for Comcast router?
Using the port numbers 80 and 37777 we will make the two port rules within the router. We have laid out the steps to configuring port forwarding with a Comcast router.
How to check for open ports on router?
When the page loads, you will then type the two port numbers in the search bar separated by a comma such as "80, 37777.". Click "User Specified Custom Port Probe" to check for open ports on your router.
What is the default port number for DVR?
Although the default port number within your DVR is 80 for the HTTP port, 80 happens to be a very commonly used or blocked port. Therefore, if this port number or 37777 happen to be used be something else on your network, or blocked by your ISP, then you can use another port number in it's place.
How to make a firewall on a router?
On the left tab there is different menu options for different sections of the router. You must choose "firewall" from the left menu, and then choose "port configuration" from the top menu bar after that. This will bring up the appropriate section of the router that you will make the rules in.
What is a port rule?
These "port rules" tell your router to allow certain internet traffic into your network, and where this traffic should go. To create port rules, you need to know which port numbers in your DVR are assigned to it's TCP and HTTP ports within your DVR's networking section. You can find this information in the networking menu of your DVR.
Question
I've read lots of questions and discussions on the subject without success. Not being a very smart network person, I need someone to PLEASE walk me thru setting up the Remote Desktop connection (without leaving out any steps assuming I 'knew or should have known something').
Answers
I know this post is old, but i was searching for answers to why my RDP connection won't work. This may help you though if you haven't figured it out yet:
All replies
To connect through the Internet you have to use a registered public IP. Your PC is on a private network, so you cannot connct to it directly across the Internet.
Where is Remote Management on Netgear router?
Some routers called it Remote Access and it’s usually found under Advanced Settings. On Netgear router, you can find this option under Settings > Remote Management.
How to share a router?
Part 1: Turn On remote sharing. Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Management option.
How to find which DNS service to choose?
The best way to find, which service to choose, is by checking which service is supported on your router So follow these steps. 1. Login to your router and look for an option that says Dynamic DNS. If it’s not there, then you can download IP updater software from any Dynamic DNS provider.
What is the IP address of a router?
8080. So, if your public IP address is 74.12.168.14, then you’ll have to type 74.12.168.14:8080 on the web browser. 1.
Can I connect an external hard drive to my router?
And finally, you can connect an external hard drive to your router and access it from anywhere.
Can I access my DDNS from my router?
So now that you have set up DDNS and remote access on your router, you can access it from anywhere via the Internet. In case you have an old router here are some tips on how to boost network on your old Wi-Fi
