External access to Powerlink’s Citrix environment is now managed through Okta. There are 2 components: The Okta portal (https://powerlink.okta.com). The Okta portal is an integrated platform that provides secure access to Powerlink’s applications and information.
Full Answer
Why choose Powerlink?
Powerlink is an ISO 9001-certified healthcare support services company whose professional staff follows industry standards for quality and process to help customers reduce costs, improve efficiency and achieve higher customer satisfaction. Powerlink brings world-class management strategies to the challenging veteran’s home market.
How are system alarms displayed with Powerlink IP?
System alarms can be displayed via alarm contacts or remote monitoring with the latest SNMP technology. The HV line inter- face transmits/receives the PLC signal and is connected to the coupling unit. The integrated teleprotection system SWT 3000 provides binary I/O and GOOSE (IEC 61850) interfaces. Figure 3: PowerLink IP: system architecture
How does Powerlink IP compare to traditional PLC systems?
In contrast to traditional PLC systems, PowerLink IP utilizes a frequency band of up to 256 kHz, allowing a maximum data rate of up to 2 Mbps1per transmission direction (see Figure 4). Thanks to its expanded bandwidth, PowerLink IP can replace several traditional PLC systems.
How does Powerlink IP work in a substation?
If PowerLink IP is the only PLC system in the substation, legacy devices like analog phone and IEC 60870-5-101 RTU are connected using a small gateway/ router device that converts interfaces like analog voice, V.24, X.21, and E1 into Ethernet/IP protocol. PowerLink IP – from traditional to digital substations 1 IEC 60870-5-104
How does Powerlink help?
Powerlink can assist in solving healthcare facility management problems by partnering with you. Whether you try solve your problems internally or count on us to manage the solution, we can help
Is Powerlink a reliable company?
Powerlink’s Process is Proven Reliable Powerlink’s Quality Management System is certified ISO 9001, requiring a structured manner of delivering a better service. The certification is supported by documented information such as procedures, work instructions, policies and forms. The key to successful service delivery is to provide all who must execute the quality system with documented, understandable instructions which define both expectations, responsibilities and actions to achieve the stated quality goals. Read More Powerlink’s Training - The Best in the Industry With growing demands and constantly changing requirements, healthcare is a fast-paced industry that requires ongoing extensive training programs. Powerlink has developed a comprehensive training program key to employee retention, competency, and, ultimately, the
What does the status signal on the powerlink do?
STATUS output signal on the rear panel allows remote indication of whether the unit is on or off (high indicates the unit is on or sequencing on, low that the PowerLink is off or sequencing off)
What is a Furman Powerlink?
The Furman PowerLink is a compact, low-cost rackmount Remote Sequencer that provides timing for up to six power control devices, turning them on and off in a preset seq uence. The delay interval between the turn-on or turn-off of each device and the next in sequence is user-adjustable via an internal trimpot.
What is momentary mode on a Powerlink?
In Momentary Mode, the PowerLink has “memory” — it only needs a momentary signal to change its state from on to off, or off to on. When first plugged in (or after power is lost and re-applied for any reason) the “memory” state is off. It will stay off until sequenced on by the front panel START ON/OFF SEQUENCE pushbutton or a momentary connec-tion of the REM IN terminal to a voltage source of at least ± 5 VDC or 6 VAC (130V max). The sequence starts on the rising edge of the signal. The rear panel +12V output may be used as a trig-ger source. This is further explained in the section “Setup for Remote Operation” below.
How long is Furman Powerlink warranty?
The Furman PowerLink is warranted against failures due to defective parts or faulty workman-ship for a period of three years after delivery to the original owner. During this period, Furman will make any necessary repairs without charge for parts or labor. Shipping charges to the factory or repair station must be prepaid by the owner; return shipping charges (via UPS Ground) will be paid by Furman.
Can you use more than one powerlink?
You can use more than one PowerLink to control and sequence additional equipment. To control de-vices remotely with one or more remote switches, connect the REM and REM COM terminals of all units together. You might need to connect the +12V or GND terminals. Be sure that the mode (momentary or maintained) of all units is set the same. Connect a single maintained switch or one or more momentary switches to the nearest PowerLink, as discussed in the sections above.
What is IO-Link master?
The IO-Link master for the control cabinet serve as a gateway between intelligent IO-Link sensors and the field bus. Besides, important information of the intelligent sensors can simultaneously be sent into the IT world. With a separate IoT Ethernet socket the IT network can be set up completely separated from the automation network.
What is an 8 port IO link?
The 8 port decentralised IO-Link master serve as a gateway between intelligent IO-Link sensors and the field bus POWERLINK. Besides, important information of the intelligent sensors can simultaneously be sent into the IT world. With a separate IoT Ethernet socket the IT network can be set up completely separated from the automation network.
What is next generation electronic platform?
The next-generation electronic platform that allows you easy access to connections; it's easy to assemble and install, commission, and maintain. It includes a graphic display for configuration and diagnostics, easy robust connections, and is highly distributable.
What is Powerlink IP?
PowerLink IP is the best solution for ensuring the highest availability of major HV links by establishing an alternative communication pathway for critical grid applications (for example, protection devices, RTUs, and voice). PowerLink IP meets the most stringent standards of transmission reliability.
What happens when powerlink is disturbed?
If a part of the PowerLink IP frequency band is disturbed, additional frequency bandwidth can be requested from adjacent PowerLink IP systems. Systems that are operating in adjacent channels automatically exchange information about the individual bit rate to be transmitted. The bandwidth that may be utilized by an individual system is adjusted and optimized for all systems operating in the neighboring frequency bands.
What is the IEC 61000-6-2?
Immunity in industrial environments – generic standard IEC 61000-6-2, for test levels see table.Immunity for equipment used in power station and substation environments IEC 61000-6-5, for test levels see table in ().
How much bandwidth does a HV power line use?
HV power line carrier systems typically operate in the frequency range up to 500 kHz. Traditional HV-PLC systems use bandwidth up to 32 kHz per system , providing a data rate up to 320 Kbps.
Can powerlink block channel bands?
Parts of the frequency band of the PowerLink IP system’s channel band can be blocked (notched) for example, if they are used by radio services. This feature enables higher data rates, because the PowerLink IP frequency band can be extended beyond the blocked frequencies.
Is Powerlink IP fiber optic?
Although the main transmission lines are usually equipped with fiber-optic cables, there are many HV substations where the installation of fiber is not cost-effective. In this case, PowerLink IP serves as an economical solution that can also provide the required bandwidth to replace alternative connections like wireless communication.
