How to run remote-viewer on KVM/QEMU?
Note that a combination of SSH and remote-viewer is also possible; but then you would open a „SSH -X“ connection first and run remote-viewer on the KVM/Qemu host and not on the network client system. I will present such a solution in a later article, too. The Spice console of KVM/Qemu offers access to a graphical desktop of a virtual machine guest.
What is KVM/QEMU Spice?
The Spice console of KVM/Qemu offers access to a graphical desktop of a virtual machine guest. Spice clients as „remote-viewer“, „virt-viewer“ and „virt-manager“ can be used locally and remotely. The first two clients offer multiple screens – but all clients provide a one seat solution, only.
How do I connect to a VNC server via QEMU?
You need to attach your vncserver with the guest operating system console. This can be done using any one of the following method: Normally, QEMU (/usr/libexec/qemu-kvm) uses SDL to display the VGA output. With the -vnc option option, you can have QEMU listen on VNC display display and redirect the VGA display over the VNC session.
How do I run QEMU from another computer?
Show activity on this post. To run QEMU remotely, your best option is to use its VNC support; this will disable its SDL window display, and allow you to connect to the graphical display remotely. Use the -vnc option with a target display ( e.g. -vnc :0 to listen on port 5900 and allow connections from anywhere).
How do I access KVM remotely?
Use Virtual Network Computing (VNC) to access your Linux Kernel-based Virtual Machine (KVM) host remotely....Accessing your KVM host remotelyFrom the Home page, click the Plug-ins tab.From the Plug-ins tab, under Remote Access, click Setup Remote Control.Change the VNC port to 5900.
How do I access virt-manager remotely?
Start virt-manager. Open the File->Add Connection menu. Input values for the hypervisor type, the connection, Connection->Remote tunnel over SSH, and enter the desired hostname, then click connection.
How do I access KVM GUI?
Issue the virt-manager command on the KVM host to launch the virtual machine manager GUI. The Virtual Machine Manager application user interface gets launched....Click Browse Local. The Locate existing storage window is displayed. ... Select "RuckusNetworkDirector2. qcow2" image from the RND2. ... Click Choose Volume.
Is there a GUI for KVM?
While KVM works in kernel-space, we use QEMU as the machine emulator for user-space. This QEMU KVM combination gives the users lightweight virtualization and good performance (but with no GUI).
How do I log into VM with Virsh?
Open a shell prompt or login using ssh. Login to a host server called server1. Use the virsh console command to log in to a running VM called 'centos7' type: virsh console centos7. To exit a virsh console session, type CTRL + Shift followed by ] .
How do I convert KVM to server?
Using KVM to remotely access your serverStep 1: Log in to KVM.Step 2: Open the KVM page.Step 3: Launch the console.Step 4: Run the file.Step 5: Launch console for Dell Server.Conclusion.
How do you get qemu GUI?
How to install Qemu/KVM and Virt-Manager GUI on Ubuntu 20.04 LTSOpen a command terminal.Install QEMU/KVM on Ubuntu 20.04 Server.Install Virt-Manager GUI for KVM on Linux.Create a New Virtual Machine.Browse the ISO file.Choose Memory and CPU settings.Create a disk image for the KVM virtual machine.Select Network.More items...•
What are the KVM management tool?
Management Tools - KVM. Abiquo is a technology-agnostic solution for enterprises and service providers who want to quickly and simply build, manage and develop public and private clouds based on their existing heterogeneous environments.
Is virt a KVM manager?
The virt-manager application is a desktop user interface for managing virtual machines through libvirt. It primarily targets KVM VMs, but also manages Xen and LXC (linux containers). It presents a summary view of running domains, their live performance & resource utilization statistics.
Is QEMU better than VirtualBox?
VirtualBox is faster and has a better UI than QEMU. It's also a good choice only for x86 and x64 architectures.
Is KVM better than VirtualBox?
KVM, a type 1 hypervisor, is smaller and faster than VirtualBox, but VirtualBox is more scalable. KVM is better integrated with Linux, and while it will work with other guests, it works best with Linux. In short, if you want to install a binary Linux distribution as a guest, it's better to use KVM.
Is there a GUI for QEMU?
JavaQemu, a GUI for QEMU written in Java.
Is there a GUI for QEMU?
JavaQemu, a GUI for QEMU written in Java.
How do you use QEMU GUI?
Contents showStep 1: Download Qemu for Windows.Step 2: Install Qemu.Step 3: Install GUI for QEMU on Windows 10.Step 4: Setup QEMU manager Qtemu GUI.Step 5: Create a Virtual machine.Step 6: Set bootable medium CD/DVD.Step 7: Insert ISO file in QEMU via Qtemu GUI.Step 8: Boot Qemu Virtual Machine via GUI.
How do I start QEMU?
The command to start QEMU To emulate a legacy PC system, use qemu-system-i386 . To emulate a more modern system, use qemu-system-x86_64 .
What is QEMU and KVM?
Qemu is a machine emulator that can run operating systems and programs for one machine on a different machine. Mostly it is not used as emulator but as virtualizer in collaboration with KVM kernel components. In that case it utilizes the virtualization technology of the hardware to virtualize guests.
What is remote viewer?
This scenario may appear a bit strange for those among my readers who know that remote-viewer is a network client application: Remote-viewer is normally used on a remote client systems to connect to the Qemu process for a VM on a server host via TCP over a LAN . In our present scenario, however, we start remote-viewer on the server host itself and achieve network capabilities only by making use of SSH. But such a scenario sets comparison standards regarding data transfer rates. Any real client/server solution should provide advantages over such a simple approach. We come back to such comparisons in the forthcoming articles of this series.
What module must be loaded in OpenSuse?
The module "module-native-protocol-tcp " must be loaded. On a standard Opensuse Leap system this is the case; see the settings in the files " /etc/pulse/default.pa " and for a specific user in " ~/.config/pulse/default.pa ".
Where is sound of the VM played if we do nothing?
The funny thing about sound in our remote scenario with SSH and a Unix socket on the KVM host is the following:
Can remote viewer be used on a KVM?
In the last article we saw that "remote-viewer" can be used locally on the KVM-host to directly access the Qemu-emulator of a specific VM via a Unix socket instead of a network port. Its a simple and fairly effective method - though not well documented. We confined the right to access the socket for a VM to a specific group of users.
Can you have multiple heads on a virtio?
You see that we can set multiple heads for a virtio video device, too. A big advantage is that we do not need any special memory settings as for the QXL device.
Does Qemu support TLS?
So far Qemu is prepared to support TLS on the KVM-server - if and when the use of TLS is requested. We, therefore, still have to define that TLS should be used for connections to the Spice console of our specific test-VM "debianx".
Does TLS encryption to the VM work locally, too?
An interesting question is whether we can have encryption locally on the KVM/Qemu-server, too. The answer is: Yes, but you still have to provide the FQDN of the server; the network request will nevertheless be handled over the "lo"-device. This at least enables you to test your VM settings locally. But local encryption could also be interesting in some multi-user scenarios.
How to run QEMU remotely?
To run QEMU remotely, your best option is to use its VNC support; this will disable its SDL window display, and allow you to connect to the graphical display remotely. Use the -vnc option with a target display ( e.g. -vnc :0 to listen on port 5900 and allow connections from anywhere). If you’re not using a US English keyboard, you’ll also need to specify the keyboard layout with the -k option.
Does Xen support VNC?
This also works with KVM if you’d rather use that. (KVM uses QEMU for its I/O.) Xen supports VNC too.
How would we specify an URI, which points to a Unix-socket, for remote-viewer?
To force remote-viewer to use a Unix socket we first have to find out how we specify an URI pointing to such a socket. Well, the first of the named articles above together with the man-pages for remote-viewer gives us an idea. The right form for a local access is:
What is remote viewer?
I discussed " remote-viewer " - a tool to access the graphical Spice console of a virtual machine [VM] on a KVM/Qemu host. Although remote-viewer is thought to be used over network connections, you can also use it locally on the virtualization host itself, e.g. in a desktop virtualization scenario.
How does remote viewer work?
Remote-viewer works very well with a local Unix socket instead of a TCP socket as the interface to the Qemu-emulator process of the VM. A socket based local access scenario to a Spice console can easily be configured via respective settings in the XML-definition file of a VM. However, to improve security you should avoid adding a standard user who wants to use remote-viewer to the "qemu" group. Involving ACL rights will help you to confine users to access the Spice console of specific VMs via placing a socket into a specific directory and controlling access to it and its contents.
Why does UVMA fail?
fails due to insufficient access rights. Obviously, the user "uvma" needs write rights on the specified "stream" socket.
Can you use a Unix socket on a VM?
Yes, we can - by working with a Unix socket on the VM host. This is the subject of this article. While we prepare a Spice socket configuration for remote-viewer we also answer the question which sockets the libvirtd daemon offers for its client.
Does libvirt work with Qemu?
In the drawing I also indicated that libvirt-based tools (as virt-manager, virt-viewer), which do not directly interact with the qemu-emulator, use a specific socket which is automatically created at a standard location on Opensuse Leap 15.x systems.
Does Remote Viewer support multi screen?
We verified that remote-viewer supports a multi-screen presentation of any major graphical Linux desktop started on the VM. Present versions of KDE and Gnome on a Kali/Debian/Opensuse guest automatically adapt to changes of the user's Spice client windows (on the host's desktop). XFCE, however, requires a manual configuration of the virtual screens with tools of the guest OS.
What is a virt manager in KVM?
KVM: virt-manager to connect to a remote console using qemu+ssh. If you are running KVM on a console-only server, you still have the option to use the graphical virt-manager. You just need to specify the method of communication (ssh, tls, tcp, etc).
Does libvirtd need to listen to TCP?
Using the ssh tunneling solution described in this article, the libvirtd service on the server side does *not* need to enable listening on TCP in “/etc/libvirt/libvirtd.conf”.
Can you open a remote console to a VM without being prompted for the password multiple times?
If you want to open a remote console to a VM without being prompted for the password multiple times, then make sure the display (either Spice or VNC is fine) uses all interfaces for its address as shown below.
Does virt manager require passphrase?
virt-manager should immediately prompt you for the passphrase protecting the private key (this is not the user password!), and once you enter it, you will be looking at virt-manager just like you were sitting at the KVM host locally.
Where is the VM config file?
You need to edit your VM config file which is in XML format. The config file is located at /etc/libvirt/qemu directory. In this example, edit centos1.xml as follows:#N## vi /etc/libvirt/qemu/centos1.xml#N#Append the following line before final </devices>:
How Do I Password Protect My VNC Session?
The passwd attribute provides a VNC password in clear text (so make sure your xml config file is only readable by root user). Edit centos1.xml file as follows:
What is type=vnc?
type=’vnc’: The graphics element has a mandatory type attribute which takes the value “sdl”, “vnc”, “rdp” or “desktop”. In this case it is set to VNC for remote access.
Limitations
Unfortunately, I have to reduce expectations of readers who are out for " multi-user remote desktop solutions". This is not what the present Spice solutions with the named clients will offer you. See below.
Spice with multiple screens requires a non default configuration of the VM's QXL device
For a basic Spice setup there is not too much to do; " just " choose Spice for the display-settings of your VM and configure the VM's QXL graphics device. Such a device corresponds to something like a virtual graphics card. Well, it sounds easy, but when I tried it myself, I had to experiment.
Conclusion
The Spice console of KVM/Qemu offers access to a graphical desktop of a virtual machine guest. Spice clients as "remote-viewer", "virt-viewer" and "virt-manager" can be used locally and remotely. The first two clients offer multiple screens - but all clients provide a one seat solution, only. This may, however, be sufficient for many use cases.
Links
Spice console and Spice protocol https://linuxhint.com/configure_spice_server_debian_10/ https://www.spice-space.org/spice-user-manual.html https://www.spice-space.org/spice-for-newbies.html
Further articles in this series
Dieser Eintrag wurde veröffentlicht in Leap 15.2, Virtualisierung, KVM, Xen und verschlagwortet mit graphical access to VMs, KVM, multi-screen console, one seat solution, Opensuse Leap 15.2, qemu, QXL, remote connections, Spice, Spice console, Spice-Clients, SSH, TLS, virtual machines von eremo. Permanenter Link zum Eintrag .
Documentation? Not Really …
Spice Access Via A Socket
Off Topic: What Sockets Are Used by virt-manager and Virt-Viewer?
How Would We Specify An Uri, Which Points to A Unix-Socket, For Remote-Viewer?
You Cannot Use The Libvirtd-Sockets with Remote-Viewer!
remote-viewer with A Local Unix Socket
Security Considerations
Conclusion
- Remote-viewer works very well with a local Unix socket instead of a TCP socket as the interface to the Qemu-emulator process of the VM. A socket based local access scenario to a Spice console can easily be configured via respective settings in the XML-definition file of a VM. However, to improve security you should avoid adding a standard user who ...
Links