raspberry pi file server with remote access

VNC: Remote access a Raspberry Pi

1. Enable VNC. First, make sure both your Raspberry Pi and the other computer you’re going to use are connected to the same network.
2. Open VNC Viewer. You’re now ready to connect to your Raspberry Pi from another computer. ...
3. Connect to Raspberry Pi. ...
4. Remote control. ...
5. Looking at properties. ...
6. Get online. ...
Sign in. ...
Send files. ...
Retrieve files. ...
Android and iOS. ...

Full Answer

How can I access my Raspberry Pi from a remote computer?

If you want to access your Raspberry Pi from a remote computer, you can use SSH to do this, and get a terminal as if you were on the Raspberry Pi directly.But for this, you'll need the IP address and...

How to use a Raspberry Pi as a file server?

To use a Raspberry Pi as a file server, a service, named Samba is available. Once installed and configured correctly, files on the Raspberry Pi can be shared with everyone on the same network. We will now see in detail a typical installation, i.e., how to install Samba on Raspberry Pi OS and then configure it.

How to enable easy access to the Raspberry Pi's file system?

Now, we need to enable easy access to the Raspberry Pi's file system so that we can access the Raspberry Pi's files and folders. To do so we will need to change the Hostname and install some additional packages. In the Raspberry Pi's console, type in sudo raspi-config and hit Enter. Navigate with your arrow keys to Network Options and hit Enter.

How to create a Raspberry Pi project from an IP address?

First of all, you’ll need to know your Raspberry Pi’s IP address. Copy the file myfile.txt from your computer to the pi user’s home folder of your Raspberry Pi at the IP address 192.168.1.3 with the following command: Copy the file to the /home/pi/project/ directory on your Raspberry Pi (the project folder must already exist):

Can I use a Raspberry Pi as a file server?

To use a Raspberry Pi as a file server, a service, named Samba is available. Once installed and configured correctly, files on the Raspberry Pi can be shared with everyone on the same network. We will now see in detail a typical installation, i.e., how to install Samba on Raspberry Pi OS and then configure it.

How do I access my Raspberry Pi NAS remotely?

The Raspberry Pi NAS can be accessed by any device on the network. To access the Raspberry Pi NAS from a Windows PC, go to This PC, click the Computer tab, and then click Map network drive: After that, a prompt will ask you for the network folder you'd like to map. You can use any drive letter you want.

How do I access files on my Raspberry Pi network?

Connecting to the shared folder Now click browse to find the shared folder automatically, or you can directly enter the address in the address box as follows smb://[ip-address]/[nameofshare] . On Windows, within the File Explorer click Network and there your Raspberry Pi should automatically appear.

Can you remotely control a Raspberry Pi?

0:598:22Control Your Raspberry Pi Remotely Using Your Phone | RaspControllerYouTubeStart of suggested clipEnd of suggested clipIt provides the cpu speeds and temperatures. So you can keep track of the operation of yourMoreIt provides the cpu speeds and temperatures. So you can keep track of the operation of your raspberry pi board remotely connection is easy once you've connected the raspberry pi.

How do I make a Raspberry Pi NAS server?

0:5324:13how to build a Raspberry Pi NAS (it's AWESOME!!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYes yes you need an ass this video will have two parts part number one setting up your raspberry piMoreYes yes you need an ass this video will have two parts part number one setting up your raspberry pi as a nas i'll walk you through every step part number two i'll walk you through how to set up a plex

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I share files between Raspberry Pi and Windows?

You can drag files from your File Explorer window, and drop them into a directory on the Raspberry Pi. You can also drag files from your Raspberry Pi directory in FileZilla to your File Explorer window. At the start of each file transfer, you should see a report in the lower transfer status window.

How do I make a file server at home?

0:0113:41Beginners Guide to Setting Up File Server On Windows 10 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd welcome back to the channel and today we are going to be doing a beginner's guide on setting upMoreAnd welcome back to the channel and today we are going to be doing a beginner's guide on setting up a file server on windows 10 home. So let's get. Started.

How do I remotely access my Raspberry Pi 4?

0:254:34How to Remote Desktop Into Your Raspberry Pi (VNC/RDP) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSystem using that way we're gonna be using all free software. Super easy to do let's get startedMoreSystem using that way we're gonna be using all free software. Super easy to do let's get started okay so to connect over vnc we need to enable that on the raspberry. Pi.

How do I access Windows folder on Raspberry Pi?

Raspberry PI – accessing your Windows shareswindowsusername: username for the windows machine.windowspassword: password for the windows machine.192.168.1.xxx: IP-address of the windows machine.192.168.1.xxx/dropbox: IP-address plus the name of the share on the Windows server.

How do I share a folder on Raspberry Pi?

6:1621:22Raspberry Pi - Install SAMBA Folder Sharing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can change a contents to anyone and access the contents to anyone so basically this is going toMoreYou can change a contents to anyone and access the contents to anyone so basically this is going to make this particular folder a wide-open. For for the Raspberry Pi then I'm going to simply click OK.

What is the operating system for Raspberry Pi?

Raspberry Pi OS is the official operating system for a Raspberry Pi. Most kits include it by default, but when you need to reinstall it, you are lost. In this article, I will show you how to install...

How to flash SD card on Raspberry Pi?

It’s a tool that allows you to flash an SD card easily on Linux, Mac, or Windows. Start Etcher. Select the location of the Raspberry Pi OS image. Choose your SD card. Click on Flash. Once the SD card is ready, eject it and insert in your Raspberry Pi.

What is DLNA on Raspberry Pi?

DLNA. DLNA is a technology that allows you to play a video stream on one device from a file stored on another. Typically, you can play a movie stored on your Raspberry Pi from your smart TV or PS4. The package that makes it possible on Debian is called minidlna.

How much does a Raspberry Pi cost?

A Raspberry Pi will cost you less than $50 and waste almost no power. You will eventually need to add the price of a hard drive if you need a lot of space, but it is reasonable. A 2TB USB drive on it and you are ready to go ( check this one on Amazon, the best value for money).

What is a file server?

A file server is used to store and share files on the local network. This server allows you, for example, to create automatic backups of your computer on this server. You can also store files that take up space on your computer but are not critical: – movies. – software.

Can you install multiple disks on a Raspberry Pi?

It is possible to install multiple disks in a RAID (with data replication) on Raspberry Pi, either in USB or with an additional SATA card. But the simplest is perhaps to have backups of this server elsewhere. We can imagine a second SD card on which is copied regularly the content of the first.

Does Raspberry Pi OS start automatically?

The installation is automatic, you have to start your Raspberry Pi, and Raspberry Pi OS will start.

How to reach Raspberry Pi?

If your device supports mDNS, you can reach your Raspberry Pi by using its hostname and the .local suffix. The default hostname on a fresh Raspberry Pi OS install is raspberrypi, so by default any Raspberry Pi running Raspberry Pi OS responds to:

Why is my Raspberry Pi connection timed out?

If you receive a connection timed out error it is likely that you have entered the wrong IP address for the Raspberry Pi.

What does ping show on Raspberry Pi?

If the Raspberry Pi is reachable, ping will show its IP address:

What is rsync over SSH?

Using rsync over SSH allows you to transfer files to your computer automatically.

What is a secure copy?

Secure Copy ( scp) is a command for sending files over SSH. This means you can copy files between computers, say from your Raspberry Pi to your desktop or laptop, or vice-versa.

What is a shared directory?

Network File System (NFS) allows you to share a directory located on one networked computer with other computers or devices on the same network. The computer where the directory is located is called the server, and computers or devices connecting to that server are called clients. Clients usually mount the shared directory to make it a part of their own directory structure. The shared directory is an example of a shared resource or network share.

Which is better: Samba or NFS?

An NFS is perhaps best suited to more permanent network-mounted directories, such as /home directories or regularly-accessed shared resources. If you want a network share that guest users can easily connect to, Samba is better suited to the task. This is because tools to temporarily mount and detach from Samba shares are more readily available across old and proprietary operating systems.

General Configuration

Buy a Raspberry Pi 4 (any will work, however, including a Pi zero!) - recommend getting a case and fan to keep it cool / operating for a long time

Enable SSH

Enabling SSH will allow you to remotely SSH into the system to maintain it, if needed.

Install VNC

Enabling VNC will allow you to remotely VNC into the system to maintain it, if needed.

Install Diode Drive

Diode Drive enables 256bit encrypted tunnel to any "Zone" the Pi is added to. Whenever a file is updated in the Zone, the Pi will sync it / store it. This allows any given team member to always get the most recent files from the Zone without having to be online all the time, or at the same time as other team members.

Install the Diode CLI

The Diode CLI enables secure remote access to the SSH and VNC interfaces. We'll lock the VNC interface to your PC's Diode CLI address so that the _only_ other system that can get to the VNC interface is your PC. As such, you'll need to install the Diode CLI on your PC (if you haven't already).

Configure the Diode CLI to always load at boot

This will ensure that if the Pi reboots, the Diode CLI interface will be up and running and ready for you to remotely administrate the system.

Invite the Pi as a Diode Drive Team Member

Adding the Pi as a Team Member will enable it to synchronize your files for any Zones it is invited to.

What remote desktop access tool can I use with Raspberry Pi?

NoMachine is another remote desktop access tool that you can use with your RaspberryPi#N#NoMachine is based on the NX protocol, which was created to improve the performance of the classic X display#N#The use is very close to VNC

How to connect to Raspberry Pi using SSH?

Fill the Saved sessions with something like Raspberry Pi. Go to Connection > SSH in the left menu, and check “Enable X11 forwarding”. Go back to Session and click Save. Then double-click on your new saved session to connect. You can read this article to get more details on how to connect via SSH to a Raspberry Pi.

What is XRDP on Raspberry Pi?

Xrdp is an opensource remote desktop protocol server, which allows you to connect to the Linux desktop from any operating system. If you need to open or redirect access on your router or firewall, know that xrdp uses the standard port 3389. Raspberry Pi Bootcamp. Sale: 10% off today.

What is VNC in XRDP?

VNC ( Virtual Network Computing) is a system to share a graphical desktop, pretty close to xrdp. The difference is that you connect to the current session directly, unlike xrdp which created a new session. There are a large number of VNC servers and clients (RealVNC, TightVNC, UltraVNC, …) VNC runs on port 5900.

How long is the Raspberry Pi challenge?

Uncover the secrets of the Raspberry Pi in a 30 days challenge.

Is RealVNC available on Mac?

RealVNC is also available for Mac OS so just get and install it and then follow the same steps as below 🙂

Does Raspberry Pi support X11?

There is nothing to do on the Raspberry Pi, X11 Forwarding is enabled by default on Raspbian

What is a Raspberry Pi?

A Raspberry Pi running Raspbian. A desktop or laptop computer. A local Wi-Fi or wired network to connect the Pi and your computer. First, most of the steps in this tutorial should work with other Linux-based Pi distributions but we’re going to be using Raspbian.

How to set up dead simple file transfer between Pi and remote computers?

Since we already have SSH set up, the easiest way to set up dead simple file transfer between our Pi and remote computers is to piggy back a GUI interface on the SSH connection. Remember how we talked about using SCP over SSH earlier in the tutorial? Running it from the command line gets real tedious, real fast. With a GUI wrapper, we’ll be able to spend more time moving files and playing with our Pi and less time pecking at the keyboard.

How to create a site in Filezilla?

Once you have installed FileZilla, fire it up and go to File – > Site Manager. Create a new site entry, name it, and plug in user name and password for your Pi.

Can you complete the rest of this tutorial remotely?

Once your SSH connection is functional, you could technically complete the rest of this tutorial remotely from the comfort of your desk—although we’d advise leaving the head and keyboard on your system until you have finish the whole project and have everything running smoothly.

Where are local directories on Pi?

Your local directories are in the left-hand pane and the remote directories on the Pi are in the right-hand pane. Moving files between the two is as simple as drag and dropping them.

Can you remotely access Raspbian?

Remote command line access to your Raspbian installation is about the handiest little tweak you can make to your system, and it’s down right simple to enable .

Can you remotely transfer files using SSH?

In addition to managing the command line remotely, you can also remotely transfer files using Secure Copy. It’s command line intensive and not particularly convenient for transferring a large number of files sourced from multiple directories, but for a one-off configuration file transfer or other small dump, it’s pretty handy. Check out our guide to copying files over SSH using the SCP command here.

Where is the IP address on Raspberry Pi?

On the right side of the window, under Hostname (or IP address), type in your Raspberry Pi's IP address you found in the previous step. In my case, it was 192.168.1.77.

How to update Raspberry Pi OS?

Once you have SSH-ed into your Raspberry Pi, type the command sudo apt update and press the Enter key. This will update packages used within the OS. If if asks you for confirmation, press y. You will see lots of text and percentages, but that's ok!

What is SSH on Raspberry Pi?

SSH stands for Secure Shell, and is essentially a secure way of remotely accessing command lines. You can find more information about SSH over here.

What is a samba file?

Now we are going to set up file access using Samba. Samba is the package that gives machines access to the Raspberry Pi's file system. With it, you should be able to navigate the Raspberry Pi using Windows' explorer window or Mac's Finder. For Windows users, this is known as Windows File Share.

How to open smb.conf file?

Once installed, type in sudo nano /etc/samba/smb.conf. The will open the file smb.conf in the console, ready for editing.

Can you navigate through the Raspberry Pi?

You can now navigate the Raspberry Pi file system through you standard machine's file navigation system. This makes it so much more convenient than having to plug mouse, keyboard, and monitor, or having to navigate through the directories with multiple ls commands.

Do you need a mouse and keyboard for Raspberry Pi?

That's it! Now you don't even need mouse, keyboard, and monitor for you Raspberry Pi projects! How liberating is that?

How to find the IP address of Raspberry Pi?

If all else fails you can connect a keyboard an a monitor to your Pi and log in with the username pi and password raspberry. Then you can use ifconfig to find out the IP address of the Pi.

How to flash Raspbian?

Insert the SD card to the card reader, unzip the downloaded Raspbian image file and open Etcher. The flashing is really straight forward:

How to enable SSH access?

SSH access can be enabled by adding an empty file called ssh or ssh.txt under the root of the SD card.

Why is the Pi SSH port hardened?

As the Pi SSH port is now exposed to the Internet it is a good idea to protect it from possible hackers by changing to more secure settings. This is called hardening.

What does NAT mean on a Pi?

This means that all machines inside your network seem to come from the the same IP address and there is no one-to-one mapping of addresses when trying to access a machine from the outside.

How to find my Pi?

Probably the easiest way to find your Pi is to log in to your wireless router admin page and find the connected devices. For example on my Asus device the admin page can be found from http://192.168.1.1, consult the user manual of your router to get to the admin page and to see connected devices. The image below is from my router settings:

What to do if you can't find your Pi?

If you can’t find your Pi listed on your router you can try going back to the WiFi setup and create a new wpa_supplicant.conf file to the SD card and try again. You may have given the wrong network credentials; remember that the SSID is case sensitive.