You can login to your Raspbmc using ssh. Once logged in install XRDP (Or any other of the RDP solutions Remmina, rDesktop) All ways to install these are in the other question you mentioned. How to install XRDP Run the following command once your logged into your Raspberry Pi over SSH.
Full Answer
What is Raspbmc?
Raspbmc is a self-updating Linux distribution that brings XBMC to the Raspberry Pi with simple installation. It can be run off an SD card, USB drive or even an NFS share and fully supports WiFi out of the box. Raspbmc comes with AirPlay, PVR, 1080p playback and much more.
How can I access my Raspberry Pi from a remote computer?
If you want to access your Raspberry Pi from a remote computer, you can use SSH to do this, and get a terminal as if you were on the Raspberry Pi directly.But for this, you'll need the IP address and...
How to connect to Raspberry Pi via RealVNC?
From Windows it is the same thing, you can download and install RealVNC from their official website Then launch the software via the start menu, type the IP of the Raspberry Pi and here you are connected to the remote desktop The requested logins are the usual users of the system (for example pi/raspberry if you have not changed the password)
How do I access the command line of a Raspberry Pi?
You can access the command line of a Raspberry Pi remotely from another computer or device on the same network using the Secure Shell (SSH) protocol. You will only have access to the command line, not the full desktop environment. For a full remote desktop, see VNC.
How to reach Raspberry Pi?
If your device supports mDNS, you can reach your Raspberry Pi by using its hostname and the .local suffix. The default hostname on a fresh Raspberry Pi OS install is raspberrypi, so by default any Raspberry Pi running Raspberry Pi OS responds to:
Why is my Raspberry Pi connection timed out?
If you receive a connection timed out error it is likely that you have entered the wrong IP address for the Raspberry Pi.
What does ping show on Raspberry Pi?
If the Raspberry Pi is reachable, ping will show its IP address:
What is rsync over SSH?
Using rsync over SSH allows you to transfer files to your computer automatically.
Can I use a Raspberry Pi to connect to another computer?
It is possible to configure your Raspberry Pi to allow access from another computer without needing to provide a password each time you connect. To do this, you need to use an SSH key instead of a password. To generate an SSH key:
Can I boot Raspberry Pi 3 from TFTP?
You can set up a DHCP/TFTP server which will allow you to boot a Raspberry Pi 3 or 4 from the network.
Can you access the command line on a Raspberry Pi?
You can access the command line of a Raspberry Pi remotely from another computer or device on the same network using the Secure Shell (SSH) protocol.
How long does it take for RaspBMC to run?
You can read more about what Raspbmc can do at www.raspbmc.com/about and be up and running in less than 20 minutes.
Is RaspBMC a Linux distribution?
I’ve been working on Raspbmc for a year and am now happy to announce the final release and congratulate XBMC on such a remarkable new release. Raspbmc is a self-updating Linux distribution that brings XBMC to the Raspberry Pi with simple installation. It can be run off an SD card, USB drive or even an NFS share and fully supports WiFi out of the box.
What remote desktop access tool can I use with Raspberry Pi?
NoMachine is another remote desktop access tool that you can use with your RaspberryPi#N#NoMachine is based on the NX protocol, which was created to improve the performance of the classic X display#N#The use is very close to VNC
How to connect to Raspberry Pi using SSH?
Fill the Saved sessions with something like Raspberry Pi. Go to Connection > SSH in the left menu, and check “Enable X11 forwarding”. Go back to Session and click Save. Then double-click on your new saved session to connect. You can read this article to get more details on how to connect via SSH to a Raspberry Pi.
What is XRDP on Raspberry Pi?
Xrdp is an opensource remote desktop protocol server, which allows you to connect to the Linux desktop from any operating system. If you need to open or redirect access on your router or firewall, know that xrdp uses the standard port 3389. Raspberry Pi Bootcamp. Sale: 10% off today.
What is VNC in XRDP?
VNC ( Virtual Network Computing) is a system to share a graphical desktop, pretty close to xrdp. The difference is that you connect to the current session directly, unlike xrdp which created a new session. There are a large number of VNC servers and clients (RealVNC, TightVNC, UltraVNC, …) VNC runs on port 5900.
How long is the Raspberry Pi challenge?
Uncover the secrets of the Raspberry Pi in a 30 days challenge.
Is RealVNC available on Mac?
RealVNC is also available for Mac OS so just get and install it and then follow the same steps as below 🙂
Does Raspberry Pi support X11?
There is nothing to do on the Raspberry Pi, X11 Forwarding is enabled by default on Raspbian
How to activate RemotePi board?
To activate support for the RemotePi Board go to menu System Settings, Services, scroll down and select 'Enable RemotePi Board Support'. In the menu entry below that make sure you select which RemotePi Board version you have (2015 or 2013). All current RemotePi Boards use the 2015 configuration.
How to disable CEC on XBMC?
CEC HAS TO be disabled for any IR remote to work in XBMC (Kodi). In Raspbmc go to menu System>Settings>System>Input Devices>Peripherals>CEC, press enter again to access the CEC settings and disable it.
How to enable LIRC GPIO?
In the OSMC menu, under My OSMC>Pi Config>Hardware Support, enable LIRC GPIO support. This may already be enabled by default. Do not change any of the other GPIO settings.
What is the default user name for OpenElec?
Use PuTTY to connect to your OpenElec / LibreELEC installation, default user name is root, password openelec (libreelec for LibreELEC)
How to browse OSMC?
Go to the OSMC menu, under My OSMC>Remotes, select Browse
How to enable GPIO TSOP IR receiver?
In Programs>Raspbmc Settings>IR Remote, enable GPIO TSOP IR Receiver and choose custom in the GPIO IR remote profile
What is an infrared remote?
This infrared remote control is a standard replacement remote control for DVD / Blu-Ray players - It works well with the RemotePi Board and Kodi-based mediacenter installations. Two AAA batteries (not included) are required. The remote uses the RC6 infrared protocol which is supported by the RemotePi Board, LIRC and the Linux IR kernel driver.
