The error ‘ Remote Desktop can’t connect to the remote computer for one of these reasons ’ can occur due to lots of reasons including wrong login credentials, connectivity issues or the use of HTTP/UDP protocol. The error message indicates three of the following reasons: Remote access to the server is not enabled
Full Answer
How to fix Remote Desktop Remote Access to server is not enabled?
This solution allows you to fix the remote access to the server is not enabled by modifying an entry in the registry. After taking those steps, the Remote Desktop will not use HTTP/UDP connections anymore, using the RPC/HTTP instead. 6. Modify network properties Press Windows key + I at the same time to enter Settings.
Why can’t I connect to RDP on my Windows VPS?
If you could connect to the RDP or your Windows VPS by turning off the firewall, so maybe the remote TCP connection is not enabled on your firewall. To enable remote TCP connection, enable the firewall again and choose the “Advanced Setting” in the left panel.
How do I enable RDP on a Windows 10 computer?
In Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Connections, find the Allow users to connect remotely by using Remote Desktop Services policy. If the setting for this policy is Enabled, Group Policy is not blocking RDP connections.
Why is my RDP server disconnected?
The RDP server may be disconnected due to different reasons. The common problems are the network, remote setting, system crash, remote service, firewall, and port issue. We will check these issues one by one in this article.
See 5 key topics from this page & related content
See 7 key topics from this page & related content
How do I fix the remote access to the server is not enabled?
How do I fix the remote access to the server is not enabled?Modify Windows Firewall settings. ... Check Allow Remote Desktop connections. ... Reset the Remote Desktop credentials. ... Add a remote computer IP address to your host's file. ... Add RDGClientTransport key in the registry. ... Modify network properties.
What does it mean remote access to the server is not enabled?
What Causes the "Remote access to the server is not enabled" Error? This error may occur for several reasons, but the most common are outlined below. Windows Update. The Remote Desktop feature may become corrupted after updating or upgrading Windows since some new files may interfere with Remote Desktop.
How do I enable RDP on a remote server?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I fix an RDP problem?
To resolve this problem, determine which application is using the same port as RDP. If the port assignment for that application cannot be changed, change the port assigned to RDP by changing the registry. After you change the registry, you must restart the Remote Desktop Services service.
Why is my RDP not connecting?
The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.
How do I reset Remote Desktop Connection?
FIX: Reset Remote Desktop Client to resolve connection issue PrintOnce you have the script on your desktop, right-click the ResetRDP file and select "Run as Administrator"If you are presented with a warning about the file, click More Info, then Run Anyway, then Yes to allow.More items...•
How do you check if RDP is enabled on a server?
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.
Is RDP enabled by default?
The Remote Desktop or RDP feature is disabled by default, so you will need to enable it in the settings.
How do I force remote access?
If you like using the Control Panel, you can enable RDP using the following steps.Open Control Panel > click on System and Security.On System and Security Screen, click on Allow Remote Access option.On the next screen, select Allow Remote connections to this computer option.More items...
How do you check port 3389 is open or not?
Open a command prompt Type in "telnet " and press enter. For example, we would type “telnet 192.168. 8.1 3389” If a blank screen appears then the port is open, and the test is successful.
How do I enable remote access in Windows 10?
Windows 10: Allow Access to Use Remote DesktopClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I connect to a remote server?
Accessing a Remote Server Without a VPN Open the Remote Desktop Connection application. Next, click the drop-down arrow that says, “Show Options.” From here, click the on the “Advanced,” tab, and click, “Settings.” In the popup window select, “Use these RD Gateway server settings.”
How do I enable Remote Access in Linux?
To enable remote desktop sharing, in File Explorer right-click on My Computer → Properties → Remote Settings and, in the pop-up that opens, check Allow remote connections to this computer, then select Apply.
How do I enable Remote Access in Windows 10?
Windows 10: Allow Access to Use Remote DesktopClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I enable remote management on Mac?
On your Mac, choose Apple menu > System Preferences, click Sharing , then select the Remote Management checkbox. If prompted, select the tasks remote users are permitted to perform.
What to do if DHCP is disabled?
If the DHCP is disabled, revert the configuration of your network interface to use DHCP:
How to resolve DHCP issue?
To resolve this issue, use Serial control to enable DHCP or reset network interface for the VM.
What does Query the IP configuration again do?
Query the IP configuration again to make sure that the network interface is now correctly set up. The new IP address should match the one that’s provided by the Azure.
How to allow remote desktop access?
Go to the Start menu and type “Allow Remote Desktop Connections.”
Where is Remote Desktop Connection?
Open the Remote Desktop Connection. You should find it in the Start menu.
What port is Remote Desktop using?
Next, check the RDP listener port. By default, Remote Desktop service will use port 3389 unless you change it. If some other application is using the same port, you won’t be able to connect.
Why is my remote desktop corrupted?
Many times, the Remote Desktop (RDP) functionality may get corrupted after a Windows update or upgrade as one of the newly installed files can interfere with the working of the RDP. You’ll have to manually identify the exact cause and fix it.
What is remote desktop?
Remote desktop is a convenient feature that allows you to virtually connect to other computers running the Windows operating system. With this feature, you can connect to computers located in any part of the world, provided you have the right credentials (username and password) to connect.
How to open regedit?
Press Windows + R to open run and type Regedit. Press the Enter key.
What does 0x00000000d3d mean?
If the value is 0x00000000d3d, it means the default port is configured and its value is 3389.
Why is my remote desktop not working?
When your Remote Desktop credentials are not matching , then the Windows 10 Remote Desktop not working error will occur if you try to connect to another remote computer. Therefore, you should try to reset your Remote Desktop credentials.
How to Fix the Windows 10 Remote Desktop Not Working Error?
After you have known the causes of the Windows 10 Remote Desktop not working error, you maybe wonder how to fix the error. Then keep reading, and you can find several useful methods.
How to remove credentials from remote desktop?
Step 1: Type Remote Desktop connection in the search box and click the best match one. Step 2: Type in the remote computer’s IP address. If there are any credentials saved for this specific computer, you will be given the option to either edit or delete. Step 3: Click delete to remove the credentials.
How to allow remote access to Windows 10?
Step 1: Press the Win key and the I key at the same time to open Settings. Step 2: Click Update & Security and then go to the For developers section. Step 3: Find Change settings to allow remote connections to this computer in the right panel and then click Show settings next to it.
How to change network from public to private?
Follow the instructions below the change network properties: Step 1: Open Settings and then click Network & Internet. Step 2: Go to the Status tab and then click Change connection properties in the right panel. Step 3: Choose Private under Network profile.
How to change the terminal server?
Here is the way to make changes: Step 1: Press the Win key and the R key at the same time to open the Run box. Step 2: Type regedit in the box and then click OK. Click Yes to open Registry Editor. Step 3: Navigate to HKEY_CURRENT_USERSoftwareMicrosoftTerminal Server Client.
Why is my RDP server disconnected?
The RDP server may be disconnected due to different reasons. The common problems are the network, remote setting, system crash, remote service, firewall, and port issue. We will check these issues one by one in this article.
Why is my RDP connection disrupted?
The RDP connection may be disrupted because of different issues. Issues like network, system crash, remote connection port, etc.
What is the default port for remote desktop?
The remote desktop port is 3389 by default. Changing this port is one of the actions RDP owners take to increase the security after they buy RDP. Also, some RDP providers change it before providing the RDP to the clients.
Why does my firewall block my RDP server?
A firewall can easily block your connection to the RDP server. This happens because of the configurations that we make on the firewall.
What happens if RDS is disabled?
If the remote desktop service (RDS) is disabled, you will lose your connection to the server.
How to open remote setting?
To open the remote setting, press the Windows Key + Pause Break button simultaneously.
When you change the RDP port, should you add the new port number to the firewall?
Note: When you change the RDP port, you should add the new port number to the firewall to allow the connections. To do this, you can use the below education.
Check The Status of The RDP Protocol
- Check the status of the RDP protocol on a local computer
To check and change the status of the RDP protocol on a local computer, see How to enable Remote Desktop. - Check the status of the RDP protocol on a remote computer
To check and change the status of the RDP protocol on a remote computer, use a network registry connection: 1. First, go to the Start menu, then select Run. In the text box that appears, enter regedt32. 2. In the Registry Editor, select File, then select Connect Network Registry. 3. I…
Check The Status of The RDP Services
- On both the local (client) computer and the remote (target) computer, the following services should be running: 1. Remote Desktop Services (TermService) 2. Remote Desktop Services UserMode Port Redirector (UmRdpService) You can use the Services MMC snap-in to manage the services locally or remotely. You can also use PowerShell to manage the services locally or …
Check That The RDP Listener Is Functioning
- Check the status of the RDP listener
For this procedure, use a PowerShell instance that has administrative permissions. For a local computer, you can also use a command prompt that has administrative permissions. However, this procedure uses PowerShell because the same cmdlets work both locally and remotely. 1. T… - Check the status of the RDP self-signed certificate
1. If you still can't connect, open the Certificates MMC snap-in. When you are prompted to select the certificate store to manage, select Computer account, and then select the affected computer. 2. In the Certificates folder under Remote Desktop, delete the RDP self-signed certificate. 3. On …
Check The RDP Listener Port
- On both the local (client) computer and the remote (target) computer, the RDP listener should be listening on port 3389. No other applications should be using this port. To check or change the RDP port, use the Registry Editor: 1. Go to the Start menu, select Run, then enter regedt32 into the text box that appears. 1.1. To connect to a remote computer, select File, and then select Con…