Axis Secure Remote Access allows AXIS Camera Station client or Axis mobile applications access the servers located on different networks/locations without the need of manual port-forwarding or configuration of a router.
Full Answer
How do I enable axis secure remote access in axis camera station?
To use Axis Secure Remote Access in AXIS Camera Station, all users must have a joint MyAxis account. The AXIS Camera Station server and the viewing client need Internet access. Install AXIS Camera Station and cameras on the local network and enable Axis Secure Remote Access in the server configuration.
What is the default user account for axis camera station?
This user can be the default administrator account on the Windows machine that the server is installed on, or a user that you’ve created. AXIS Camera Station allows you to use both local Windows and domain users and user groups. If you use a domain setup, you must join the server to the domain. Your IT department might have to help you with this
How do I connect to the Axis Camera Station 15?
Connect to AXIS Camera Station 15 Connect to server via port mapping About port mapping To connect to your server from a remote location you can do port mapping on your router. Depending on your network’s infrastructure, you might have to involve your network administrator to perform this part of the configuration. Configure the server 1.
What port does the Axis Camera Station use for port mapping?
If you run more than one server on the same network requiring port mapping, you must change the AXIS Camera Station default port (55752). Each server must have a unique port.
How do I access my axis camera remotely?
To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site. your cameras and router up manually.
What is axis remote?
Axis Secure Remote Access is a technology that makes it possible for a smartphone or PC client to access Axis network cameras when the client and the cameras are located on different local networks. Connecting to remote cameras can be a challenge, especially when the cameras are located behind routers or firewalls.
How do I connect to my axis camera IP?
Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. ... Configure computer IP address. Set your computer's IP address to 192.168. ... Launch the Setup Axis Camera Tool. ... Setup the Camera. ... Manual Camera Configuration. ... Setup Page. ... Configure Users. ... Configure Image Settings.More items...•
What is the default IP for AXIS camera?
192.168.0.90The default IP address for the Axis cameras and video encoders is 192.168. 0.90.
Is Axis Camera Station free?
Axis Camera Station One is a FREE software solution for the simultaneous viewing and recording of high-quality H. 264, MPEG-4 and Motion JPEG video from a single surveillance camera.
What is AXIS Camera default password?
root/passAxis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.
What is the RTSP for AXIS camera?
How to connect to Axis IP cameraBrandModelsExample URLAxis206rtsp://IPADDRESS:554/mpeg4/media.ampAxis206rtsp://IPADDRESS:554/axis-media/media.ampAxis206 rev2http://IPADDRESS/mjpg/video.mjpgAxis206 rev2http://IPADDRESS:554/mjpg/video.mjpg106 more rows
How do I enable Onvif on my axis camera?
If you are unable to find ONVIF user settings, please check this setting to ensure that ONVIF/Web Service is enabled.Navigate to System Options > Support > System Overview.Click ONVIF/Web service.Enable ONVIF/Web service by checking the box next to Enable Web Service.Press the Save button.
What port does Axis cameras use?
AXIS Camera Station server to devicePortNumberProtocolMain HTTP port80TCPMain HTTPS port443TCPDefault bonjour port5353UDPDefault SSDP port1900UDP1 more row
How do I reset my Axis camera remotely?
Remote reboot Axis IP cameraIn Windows open the Command Prompt.At the command prompt type in (without quotes) “FTP
How do I use AXIS IP utility?
Change the IP address of a deviceStart AXIS IP Utility. ... Right-click the device in the list and select Assign new IP address to selected device.Enter an available IP address and click Assign.To access the device from a browser, double-click the name in the list.
What is IP utility?
IP Utility is a free, Windows-based application tool with friendly user interface. It helps you locate available devices including cameras, video encoders, and standalone NVRs in the network by showing its IP address.
How do I reset my axis camera?
0:361:43Solved in 60 seconds: How to factory reset an Axis network cameraYouTubeStart of suggested clipEnd of suggested clipKeep the control button pressed for 15 to 30 seconds until the status LED indicator flashes greenMoreKeep the control button pressed for 15 to 30 seconds until the status LED indicator flashes green and yellow. Then release the control button and eventually you should see the LED turn green.
How do I find the MAC address of my axis camera?
Serial numbers for Axis network video, print and document servers generally start with 00408C followed by 6 unique characters. The serial number is identical to the product's hardware address (MAC address) and can be written in the format 00408c1a2b3c or 00:40:8c:1a:2b:3c.
How do I reset my axis camera remotely?
Remote reboot Axis IP cameraIn Windows open the Command Prompt.At the command prompt type in (without quotes) “FTP
How to view Axis camera station?
1. Open the AXIS Camera Station Windows app. 2. Select Remote server. 3. Select a server in the list or type the IP address of the AXIS Camera Station server. If Simple Service Discovery Protocol (SSDP) is allowed on the local network you can expand the dropdown list to view all local servers.
How to add camera station to Axis server?
2. Go to Configuration> Security> User permissions. 3. In the bottom right of the window, click Add.
What is the default port for Axis Camera Station?
If you run more than one server on the same network requiring port mapping, you must change the AXIS Camera Station default port (55752) . Each server must have a unique port.
Does Axis Camera Station use firewall?
During the installation, AXIS Camera Station automatically configures the Windows firewall exceptions for incoming traffic used by AXIS Camera Station. If you use a third-party firewall, you might have to request for a similar set of exceptions to be added to the configuration. In most cases only the “Inbound” port range of 55752 to 55757 requires an exception.
Does Axis take responsibility for a configuration?
Please note that AXIS doesn’t take any responsibility for how this configuration may affect your system. If the modification fails or if you get other unexpected results, you may have to restore the settings to default.
Can Axis camera station be used on domain?
AXIS Camera Station allows you to use both local Windows and domain users and user groups. If you use a domain setup, you must join the server to the domain. Your IT department might have to help you with this
What is Axis Secure Remote Access?
Axis Secure Remote Access significantly simplifies the installation of remote access to surveillance systems. It is automatically configured during installation and removes the need of manual port forwarding or router configuration.
What is Axis camera station?
AXIS Camera Station software is the ideal solution to meet the needs for active and ecient surveillanceof retail shops, hotels, schools, and manufacturing sites. A system typically contains between 10 and 50 cameras. It is designed to perfectly match Axis’ wide range of network video products and product features to optimize system reliability. For more details, see www.axis.com/axis-camera-station
What is Axis video?
Axis enables a smarter and safer world by creating network solutions that provide insights for improving security and new ways of doing business. As the industry leader in network video, Axis offers products and services for video surveillance and analytics, access control, and audio systems. Axis has more than 3,000 dedicated employees in over 50 countries and collaborates with partners worldwide to deliver customer solutions. Axis was founded in 1984 and has its headquarters in Lund, Sweden.
What is Axis encryption?
The data transferred over peer-to-peer connection, or via Axis mediator servers, is end-to-end encrypted which means that the data communicated only can be decrypted by the client and server. The data transferred via Axis backend servers (applicable from version 4 of AXIS Companion) is encrypted both between the client and the cloud, and between the cloud and the device. All encryption is performed using algorithms of the same security class as the banking sector uses to secure money transactions.
Is Axis server encrypted?
The data transferred via Axis mediator servers and over peer-to-peer connection is end-to-end encrypted which means that the data communicated only can be decrypted by the client and server. All data is encrypted using algorithms of the same security class as the banking sector uses to secure money transactions.
How many cameras can Axis Companion recorder connect to?
AXIS Companion VMS combined with AXIS S3008 Recorder connects and power up to eight cameras and can be up and running with just a few clicks. The solution can easily be scaled up from providing surveillance for a single site, to provide surveillance for multiple sites and whole national chains.
What is Axis companion?
AXIS Companion video management software is designed and validated to perfectly match Axis products and features. A tight integration of network cameras, audio and door stations ensure you will get the most out of your surveillance system. Our solutions is easily adapted to your business, and seamlessly expand with your needs. Because when your business grows, so should your security solution.
Is Axis Companion video management software easy to use?
AXIS Companion video management software is simple to set up. And even simpler to use. Not only that, it gives you effortless control from anywhere.
Can images be recorded on Axis surveillance card?
Images can also be recorded onto an AXIS Surveillance Card in each camera. Axis offers a wide range of high endurance AXIS Surveillance Cards optimized for surveillance. The cameras are powered over the network, eliminating the need for separate power cables. This reduces cost and simplifies the installation
How to control axis cameras?
You can control your Axis cameras remotely via the Videoloft app by configuring the recording and alerting schedules for specific cameras and/or time periods and setting up camera detection zones . Finally, Videoloft also continually monitors your Axis system’s health, so you can rest assured your cameras are recording.
Why Videoloft’s cloud based VMS for Axis cameras?
You may be wondering why you’d choose Videoloft as your cloud provider for your Axis cameras.
Is Videoloft a good security camera?
In summary, besides its varied features and benefits, Videoloft is also a scalable and flexible solution. Not only are its cloud storage plans affordable, but it’s also compatible with a wide range of professional security cameras other than Axis, such as Dahua, Hikvision or Uniview.
Can you give someone read-only access to your videoloft?
Finally, with Videoloft’s multi-user permissions, you’ll be able to give others read-only or full admin access to all or specific cameras , depending on requirements.
Does Videoloft monitor Axis?
Finally, Videoloft also continually monitors your Axis system’s health, so you can rest assured your cameras are recording.
How to add a camera to a router?
Step 1. Log into your router’s management page (http://www.tp-link.us/faq-87.html). Go to Forwarding > Virtual Servers and click Add New. Step 2. Type the IP address and the port used by the camera in the corresponding field. For the Protocol, we recommend you select ALL.
What port is used for the camera?
Port 3333 can now be used by the camera.
How to find the HTTP port number on a camera?
Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. The default is 80.