Can I configure a BT Home hub for Internet access to DVR?
No Configure a BT Home Hub for Internet Access to a DVR The BT Home Hub is a 4 port Ethernet switch and ADSL modem router with firewall capability. The firewall is enabled by default blocking incoming connections from the internet thus protecting your network.
Does the BT Home Hub have a firewall?
The BT Home Hub is a 4 port Ethernet switch and ADSL modem router with firewall capability. The firewall is enabled by default blocking incoming connections from the internet thus protecting your network.
What wireless band does the BT Home Hub 4 use?
You’ve got smart dual-band wireless The BT Home Hub 4 uses Smart Wireless to connect to the best signal on either the 2.4GHz or 5GHz band, depending on what your device supports and where you are. To find out more, go to
How do I connect my broadband to my hub?
Insert the grey broadband cable into the ‘Broadband’ socket on your hub. Make sure it is fully pushed in - you'll hear a click. Connect the other end of the broadband cable to your master socket. If your master socket has two sockets, plug it into the left one.
Can I access my BT Home Hub remotely?
No you can't login remotely. It is only possible for BT to upgrade firmware remotely.
How do I access my BT Home Hub 4 settings?
How to open the Hub ManagerOpen a new web browser.Type 192.168.1.254 into the address bar.This will open the Hub Manager.If you want to make any changes to the hub settings, you'll need the admin password. You'll find it on the back of the Hub if you haven't updated it.
What is the IP address of the home hub 4?
Enter the IP 192.168. 1.254 into your browser and pressing enter.
How do I turn off BT WIFI remotely?
Here's how to turn wireless on and off on the BT Smart Hub:Open a new web browser on a device connected to your Hub and type 192.168. ... Click Advanced Settings.Click Wireless.Enter the admin password. ... Set the "Wireless" switch to "ON" or "OFF". ... Remember once you make any changes you will need to save them.
What is the admin password for BT Home Hub?
BT Router Login Guide The default username for your BT router is admin. The default password is admin.
What is the difference between BT Hub 4 and 5?
It's still available now, and even has a version that's unlocked to work on any ISP. However, for BT Broadband connections, the faster, better Home Hub 5 is a better choice. The BT Home Hub 4 is a dual-band device, which means it accepts connections from devices on both the 2.4GHz band and the less congested 5GHz band.
How do I find my IP address on BT Home hub?
You can find out the public IP address of your hub using these sites: www.whatismyip.com.
How do I change my BT Smart Hub IP address?
Open up your web browser and type 192.168.1.254 to access the home page of your hub.Select the Settings tab.Select the LAN tab.Click on Private Network.You can now configure your local IP range.Once you save the settings you'll be prompted to enter your admin password.
Why do bt keep changing my IP address?
BT do not issue static IP addresses to residential customers so your IP address will change whenever there is a disconnect or when BT decide to change it which can be frequently. This will as you know cause problems if you need to access a camera or NAS externally.
Can I control MyBT WIFI from my phone?
The new Wi-Fi Controls, which can be managed via the MyBT app or via the account settings on a browser, come as standard, for free, on the Smart Hub 2 and give parents or guardians greater control over how much time family members spend online.
How can I tell if someone is using MyBT WIFI?
From the Devices tab, you can see the names of all devices connected to your network, together with those in groups. You can also scroll down to see any that are off-line (devices previously connected to your network).
How do I turn off BT Internet at night?
To use access controls, select the device or the group from the Devices tab and then select the option you wish to apply: Timed pause - Immediately pauses internet access. Choose from 1 hour, 2 hours, until morning or select a time. Bedtime - This is a pre-populated schedule that turns off internet access at night.
How do I change the settings on my BT router?
Open the Hub Manager by typing 192.168.1.254 in your web browser.Click on Settings.Enter the admin password. ... Click on the "Advanced Settings" tab, then click Continue to Advanced Settings.Click on the "Wireless" tab.To manually select the wireless channel for the "2.4 GHz" band:More items...
How do I manage devices on my BT Hub?
How do I use BT access controls (Wi-Fi Controls)?Open a new web browser on your connected device and type 192.168.1.254 into the address bar. ... Click Advanced Settings.Click BT access control.Enter the admin password. ... Select the device you want to apply access controls to and click Set.Choose the start time and click Set.More items...
How do I configure my BT router?
Click SaveOpen a new web browser on a device connected to your Hub and type 192.168.1.254 in the address bar. This will open the Hub manager.Click Smart Setup.Enter the admin password. ... Click the "On/off" button to turn Smart Setup on or off.Remember once you make any changes you'll need to save them.
How do I change the security settings on my BT Home Hub?
Changing wireless settings on your BT Business Hub 5Click on the Advanced Settings tab.You will be asked to enter your admin password.Click on Wireless.Change your Security setting.Click WEP (64/40 bits). Set a wireless key for the network. ... Click Apply.Click Yes.
How to connect a new broadband hub to a phone?
Unplug any existing broadband kit, then: 1. Connect your new Hub directly to your master phone socket 2. Slide the two parts of the power supply together, connect power cable and switch on at the socket 3. Press the Powerbutton on the back of the Hub to turn it on. 4. Wait a couple of minutes. Coloured lights will flash while the Hub tests itself and your broadband. A steady blue light means your broadband’s ready to use. If the light doesn’t turn blue, carry on to step 2 and the Hub will help you fix things.
Where to find Bt setup instructions?
You’ll find your set-up instructions at bt.com/help/dongle.
Why is my BT broadband light orange?
We’re usually less busy between 10am and 6pm Broadband light is red You’ve tried to log in with the wrong username and password The BT Home Hub is suitable only for BT Broadband. It is not suitable for any other broadband providers or BT Business Broadband lines. Reset your Hub’s password to its factory setting (shown on the card that came with your Hub) by using a paper clip to press the recessed Reset button on the back of your Hub for a few seconds Broadband light is flashing red There’s a problem with your broadband line Check that all the cables are plugged in correctly and that it’s after midnight on the day we switch on your broadband. If cables are okay and you’ve still got a red light the next day, call us on 0800 111 4567. We’re usually less busy between 10am and 6pm Wireless light is orange You’ve switched off wireless security for one or both wireless channels Turn on your security – in the wireless tab in your Hub Manager at bthomehub.home
How to use Smart Setup?
Smart Setup will help you get your broadband and extra services up and running on all your devices. To use it, just open your device’s web browser. It only takes a few minutes and will make sure that all of your devices are set up properly. When you’ve finished, log in to My BT using your BT ID and password. If you don’t have one, you can get one at bt.com/mybt.
How to get the best speed on BT?
Go to bt.com/improve-speed to make sure you’re getting the best speed possible. To get the best speed out of your BT Broadband, use a wired connection. If you’re connecting wirelessly, the 5GHz signal will usually give you the best speed.
What frequency does a Hub use?
Note: your Hub has two wireless frequencies (2.4GHz and 5GHz). Most devices that can use 5GHz will automatically connect to that frequency, but some struggle because the network name (SSID) is the same for both by default. To find out how to fix this if you’re having problems, go to bt.com/help/ssid
How to turn on a computer hub?
1. Check power and all cables and make sure filters are fitted, then switch your computer and devices off and then on. 2. While they’re restarting, press and hold your Hub’s Restart button until your Hub light goes orange. 3. While your Hub reboots, its light will go green, blue, orange – then stay blue when ready. If it’s red, see below. Make sure you’re next to your Hub with a PC or device if you call.
What is BT home hub?
The BT Home Hub is a 4 port Ethernet switch and ADSL modem router with firewall capability. The firewall is enabled by default blocking incoming connections from the internet thus protecting your network.
How to log into home hub?
To log onto the Home Hub, use your browser, eg: Internet Explorer and in the address bar, type … http://192.168.1.254 Enter the password when prompted Click on Settings Click on Advanced Settings
How to add a game to DVR8000?
Click on Add new game or application then … 1. enter a descriptive name = DVR8000 2 Select Copy Existing = No 3 Select Protocol = TCP 5. Enter port range = 8000 – 8000 6. Enter Translate to = 8000 – 8000 Leave the trigger port blank Click on Add, then Apply
How to find the IP address of a DVR?
Use a laptop or mobile device with the DVR client software installed and try connecting to your site using the router’s external IP address. How do you find the router’s external IP address ? 1. Look at the router’s status page to find out what it’s external IP address, or 2. Use a PC in the building to access an internet site that tells you what your IP address is. eg: www.aliendvr.com/whatismyip.php Note that the username, password and port number will be the same, but the IP address, rather than being an internal address beginning 192.168… will be different
Does BT Home Hub support dynamic DNS?
It’s not easy to connect to a site with a continually changing IP address you should implement Dynamic DNS instead – the BT Home Hub does support Dynamic DNS, this is documented in a separate technical tip.
