remote access sleeping computer

How to Remotely Wake Computer From Sleep and Establish a Remote Connection

1. Assign your computer a static IP. Your computer needs to be able to receive a Magic Packet on Port 9 in order to wake...
2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. Armed with the new static IP its...
3. Turn on WOL (Wake on LAN) in your PC’s BIOS.

Full Answer

How to wake a computer from sleep to access remotely?

Waking a computer from sleep to access remotely. How to Remotely Wake Computer From Sleep and Establish a Remote Connection. 1. Assign your computer a static IP. 2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. 3. Turn on WOL (Wake on LAN) in your PC’s BIOS. 4.

Is the Remote Desktop feature compatible with sleep mode?

The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work. In order to wake a computer from sleep mode for a remote desktop session,...

Is there a way of using RDP when remote system is in sleep?

Is there a way of using RDP when remote system is in 'sleep' mode This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. As far as I know, you can not use the device as a remote workstation in sleep, but... You can configure the device to wake when it is in use then sleep when not.

How do I put my computer to sleep in Windows Vista?

To launch Sleep mode by hand, open the Start menu and click the Sleep button, shown in Figure 6.5. (You can also click the arrow beside the Lock button and then click Sleep.) Vista saves the current state and shuts off the computer in a few seconds. Figure 6.5 Click the Sleep button to quickly shut down your computer and save your work.

Can I remote into a sleeping computer?

The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work.

Can you remote access a computer that is off?

In combination with remote access software, it is a breeze to set up and use, to connect to your remote computer from anywhere even if it is powered off, in hibernation (Windows) or sleep (Mac) mode.

How do I keep my computer awake for Remote Desktop?

1. In the windows search box type “Remote Desktop Settings” and hit enter. 2. If “Enable Remote Desktop” is set to “On” and the check box is checked beside “Keep my PC awake for connections when it is plugged in”, your PC ready to go.

Can Google Remote Desktop wake a sleeping computer?

Can Chrome Remote Desktop wake from sleep? No, it can't. That's one of its main disadvantages compared to other remote desktop software. It's not possible to wake a sleeping computer using Chrome Remote Desktop, so you need to make sure all computers you wish to connect to are awake.

Can I access TeamViewer when computer is sleep?

You can turn on a sleeping or powered-off computer using TeamViewer's Wake-on-LAN feature. This means you can control an offline computer remotely by waking it up first before you establish a connection to it.

What is unattended remote access?

Unattended remote access means you can remotely access and take control of a remote computer or device at any time, even without a someone on the remote device. Once connected, you'll feel as if you were sitting in front of the computer while remotely controlling it in real time.

How do I keep my computer awake when closed?

Keep A Windows Laptop Awake Even With Its Lid Closed Click the small arrow to show all icons. From there, right-click on the Battery icon and choose Power Options. Spot the When I Close The Lid settings menu and change the Sleep option into Do Nothing by clicking on the dropdown menu.

Can you turn on computer with remote desktop?

If you use remote desktop, remote file access, or other server software, you may leave your computer on at home or work when you leave the house. This uses more power. Instead, you could remotely power on your PC whenever you need to use it. This takes advantage of Wake-on-LAN.

Does Chrome Remote Desktop have Wake-on-LAN?

Now You Know How Chrome Remote Desktop Works Chrome Remote Desktop can't connect to a remote machine when it's offline, sleeping, or turned off. The app doesn't support Wake-on-LAN, so if you want to access it at any time, make sure your computer won't go to sleep or run out of battery.

How do I use remote desktop to Wake-on-LAN?

Switch on the computer and press ESC, F1, F2, F8 or F10 during the initial startup. Depending on the BIOS manufacturer, a menu would appear. Go to the 'Power' tab and enable 'Wake Up On LAN'. Save and exit the BIOS setup.

How do I remotely wake up on LAN?

Press Windows key + X to bring up the hidden quick access menu:Select Device Manager.Expand the Network Adapters section.Right-click the adapter that you are currently using, and then click Properties.Click on the advanced tab.Select Wake on Magic package from the list of properties.More items...•

How do I setup Wake-on-LAN?

Click Start > Settings > Control Panel.Double-click System.Click the Hardware tab and click Device Manager.Expand the Network Adapters section.Right-click on your adapter and select Properties.Click the Advanced tab.Select Wake-on-LAN Options and click Properties. Set the following: Enable PME: set to Enabled.

How to remotely wake a computer from sleep?

How to Remotely Wake Computer From Sleep and Establish a Remote Connection. 1. Assign your computer a static IP. 2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. 3. Turn on WOL (Wake on LAN) in your PC’s BIOS. 4.

How to access Device Manager?

You can access the device manager by right-clicking Computer and selecting Manage and then Device Manager on the left. Alternatively you can open a run command (Windows Key+ R) and type devmgmt.msc. You should know see a list of all your computer’s devices: Device Manager.

What port does my router need to wake up?

Your computer needs to be able to receive a Magic Packet on Port 9 in order to wake up. To do this, your router has to be configured to always forward Magic Packets (on Port 9) to your computer. In order to do this your computer needs to always have the same IP address.

What is a wake on LAN?

With the Wake-on-LAN feature from TeamViewer, you can remotely access and control devices no matter whether they’re switched on or off. This not only provides great flexibility in terms of 24/7 access to devices and resources, it can also improve energy efficiency since devices can be turned off when not in use.

What port does Wake on LAN use?

Wake-on-LAN uses a UDP (User Datagram Protocol) port. Many utilities use ports 7 or 9, but you can use any port you like for WoL. The UDP port needs to be forwarded to all IP addresses behind your router—it’s not possible to forward it to a specific IP address.

Why do we wake up on LAN?

Wake-on-LAN also ensures that fewer people are required to fulfil tasks: computers can be completely unattended before you connect, meaning no member of staff needs to be onsite to interact with the device for you. Companies that trust TeamViewer.

Can you wake up TeamViewer from another computer?

The first method simply requires you to configure the hardware of the target computer and configure TeamViewer on it in order wake it up from another device connected on the network .

How to put my computer in sleep mode?

To configure Vista to go into Sleep mode automatically, select Start, Control Panel , System and Maintenance, Power Options. In the Power Options window, click the Change Plan Settings link under the currently selected power plan. Use the Put the Computer to Sleep list to select the number of minutes or hours of idle time after which Vista ...

What is sleep mode in Windows Vista?

Sleep mode is the new low-power state that Vista uses to replace the confusing Standby and Hibernate modes from earlier versions of Windows. (Standby mode preserved your work and enabled you to restart quickly, but didn't entirely shut off the machine's power; Hibernate mode preserved your work and completely shut off the machine, but also took a relatively long time to restart-faster than shutting down your computer entirely, but slower than Standby.)

How to wake on LAN?

Here are the steps to follow: 1. In the Network Connections window, right-click the connection that uses the NIC you want to configure, and then click Properties. The User Account Control dialog box appears. 2.

How to disable password on wakeup?

To disable the password requirement on wakeup, select Start, Control Panel, System and Maintenance, Power Options. In the Power Options window, click the Require a Password on Wakeup link to open the System Settings window. Click Change Settings That Are Currently Unavailable, and then enter your UAC credentials.

What happens when you sleep in standby mode?

As in Standby, you enter Sleep mode within just a few seconds. As in both Standby and Hibernate, Sleep mode preserves all your open documents, windows, and programs. As in Hibernate, Sleep mode shuts down your computer, except it maintains power to the memory chips so that it can preserve the contents of RAM for when you restart.

What does it mean when NIC doesn't support wake on LAN?

NOTE If the Allow This Device to Wake the Computer check box is disabled, it probably means your NIC doesn't support wake-on-LAN. However, it may also mean that this support has been disabled. In the NIC's Properties dialog box, display the Advanced tab and look for a property named Wake Up Capabilities.

Can you wake up a computer remotely?

However, it can be a pain if you need to access the computer remotely over your network because you have no way to wake up the sleeping computer (which normally requires a physical action such as jiggling the mouse or pressing the computer's power button). Fortunately, most new NICs support a feature called wake-on-LAN, ...

How to wake up a computer remotely?

Alternatively, right-click and press the Wake Up Selected Computers option, or press F8 on your keyboard instead. You’ll need to confirm that you actually wish to remotely wake these PCs. Press OK to confirm. The WOL magic packet will be sent automatically once you confirm this.

How to configure Wake on LAN?

You can configure your Wake-on-LAN settings by clicking the Configure button next to the Wake-on-LAN setting, where you can set up the TeamViewer IDs that are allowed to connect to your PC. If you don’t see this setting, your network device probably isn’t capable of supporting Wake-on-LAN.

How to enable WOL in Windows 10?

To enable WOL in Window 10, you’ll need to enable it in the Device Manager settings menu. Right-click the Start menu and click Device Manager to begin. In the Device Manager window, open the Network Adapters category. Right-click the network adapter you use to connect to your network, then click the Properties option.

How to access residential settings on router?

You can access the residential settings menu for most home routers by typing http://192.168.0.1 or http://192.168.1.1 in your web browser. You’ll need the administration username and password to sign in, which (if you haven’t changed it) should be printed on your router itself, or within the supplied user manual.

Can I use Wake on LAN over WiFi?

Note: This can only work with ethernet-connected PCs, meaning you can’t typically use Wake-on-LAN over WiFi.

Can you remotely wake up a Windows 10 PC?

You can also use remote access software like TeamViewer to remotely wake up a Windows 10 PC. TeamViewer uses the same WOL technology to remotely wake up a PC, which would allow you to wake up a PC that isn’t connected to your local network. You might want to do this if you want to access your work PC from home or if you’re away from home ...