How can I access Hikvision NVR remotely?
Go the following menu location: Configuration --> Network --> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.
How do I access my NVR remotely?
To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How do I set up HIK connect remotely?
1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login and then Register. Follow this process through as instructed by the app. 3) Once you have logged in press the + Icon in the top right corner, highlighted on the image below, and then select Scan QR Code.
How can I watch Hikvision CCTV from anywhere using Internet?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How can I access my DVR from outside network?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How do I view NVR on my phone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How can I access my Hikvision DVR from LAN?
How to view (access) Hikvision DVR live view on PC in Local Area Network (LAN)Open Internet Explorer. 0:00.Type the IP Address for the device. 0:09.Type the user name and passport. 0:18.Click on permission to install a new plug-in for the Internet Browser. 0:26.
What is remote Configuration in Hikvision?
After adding a device, you can set the parameters of the device, including basic information, time settings, recording schedule, etc. Edit Information of Cameras Linked to Added Device.
How do I find my Hikvision NVR IP address?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
How do I turn off Hikvision NVR remotely?
On the old Hikvision CCTV recorder right click with the mouse, click menu, then click shutdown at the bottom right, and then click shutdown again. You'll see a message “system is shutting down please wait” after few seconds it will then show “Please power off”.
How can I access my security cameras remotely over the Internet?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I connect my NVR to my smartphone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How do I connect IP camera to NVR remotely?
0:131:25How to Connect a Remote IP Camera to a QC Series NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera select private now enter the IP address of your IP. Camera enter your port number username.MoreCamera select private now enter the IP address of your IP. Camera enter your port number username. And password then click OK when you're finished adding cameras. Click on OK.
How do I find the IP address of my NVR?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How to enable Hik Connect on a recorder?
Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.
How to connect a DVR to a router?
Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...
How to register a Hik Connect account?
You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...
How long does it take to set up a DVR?
The steps are easy and logical and the procedure can be finished in 5-10 minutes. Before you begin, make sure that your NVR or DVR is set up locally, that the system has been configured with a password and that your cameras are viewable (on the TV screen).
Integrating IP Cameras Over A Wireless Link
A common requirement for CCTV systems on large houses, farms and commercial buildings is to integrate cameras that are installed on a remote building such as a garage or barn. When the recorder is in the main building this can be achieved by extending a local area network using point-to-point wireless bridging devices.
Method B - Adding Cameras From the Local Network
For method B the wireless link (access point side) is connected to the existing local area network (LAN).
How to connect NVR to network?
Connect your NVR to your network by running an ethernet cable from the LAN port on your NVR or DVR directly to your router. If you are using a Windows computer, install SADP from this page. If you are using an Apple computer, install it from here.
How to find serial number on a hik connect?
2) Click on the Add button in the top right corner and, in the window that pops up, enter the 9 digits from the Serial Number that you noted down earlier and press the Search button.
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
When will NVR be available for remote viewing?
October 21, 2020. Setting up your NVR for remote viewing is a critical part of surveillance today, allowing you to watch your security camera feeds while you’re out and about. Your security camera system is designed to protect your premises 24/7, especially when you’re not there. Even if you’ve got a video monitoring company helping out, ...
Is a WAN address static?
The WAN address can either be static (generally for large businesses) or dynamic for residential and small businesses. Dynamic addresses are rotated by Internet Service Providers for security purposes or power fluctuations.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
What is NVR camera?
The NVR will allow very basic settings of an IP camera to be adjusted. You are able to adjust contrast, brightness etc and you can alter recording parameters such as resolution , encoding and bitrates but if you need to alter day/night settings or exposure speeds then you need to be able to access the camera settings within the camera itself. ...
What is the port number for NVR cameras?
You may have noticed that the cameras become accessible via the IP address of the NVR followed by a port number (65001 for camera 1 , 65002 for camera 2 etc).
What port range do I need for a 16 channel NVR?
You will need to forward the required port range to the IP address of the NVR. For example if the IP address of a 16 channel NVR is 192.168.1.200 then you would port foward the port range of 65001 - 65016 to the IP address 192.168.1.200. Externally you would connect to your NVR through a web browser via it's external IP address or DDNS address ...
How to change Hikvision port?
You can change these ports locally as well. Right-click with your mouse, go to the Main Menu, then login with your username and password. Navigate to the Configuration section and after that click the Network tab. On the top, you need to select the Ports tab.
When to use port forwarding on Hikvision?
Port forwarding should only be used when the devices need to be accessed via the internet. There are two ways to open up the ports for your Hikvision device. The first and the easy way is by using the UPnP function.
What is the port range of a NVR?
Never leave the default ports, especially if you have decided to expose your NVR on the internet. The port range can be anything between 1-65535.
What port is used for streaming?
HTTP port: 80 (this is the port used to access the recorder locally or remotely via web browser) Server port: 8000 (this is the port used by the phone app) RTSP port: 554 (this is the port used for live streaming. Read more here .)
