remote access to sleeping computer

How to Remotely Wake Computer From Sleep and Establish a Remote Connection

1. Assign your computer a static IP. Your computer needs to be able to receive a Magic Packet on Port 9 in order to wake...
2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. Armed with the new static IP its...
3. Turn on WOL (Wake on LAN) in your PC’s BIOS.

Full Answer

How to wake a computer from sleep to access remotely?

Waking a computer from sleep to access remotely. How to Remotely Wake Computer From Sleep and Establish a Remote Connection. 1. Assign your computer a static IP. 2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. 3. Turn on WOL (Wake on LAN) in your PC’s BIOS. 4.

Is the Remote Desktop feature compatible with sleep mode?

The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work. In order to wake a computer from sleep mode for a remote desktop session,...

Is there a way of using RDP when remote system is in sleep?

Is there a way of using RDP when remote system is in 'sleep' mode This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. As far as I know, you can not use the device as a remote workstation in sleep, but... You can configure the device to wake when it is in use then sleep when not.

How do I put my computer to sleep in Windows Vista?

To launch Sleep mode by hand, open the Start menu and click the Sleep button, shown in Figure 6.5. (You can also click the arrow beside the Lock button and then click Sleep.) Vista saves the current state and shuts off the computer in a few seconds. Figure 6.5 Click the Sleep button to quickly shut down your computer and save your work.

Can you remote access a computer in sleep mode?

The remote desktop feature is compatible with sleep mode in the Apple, Windows 7, Windows 8, and Windows 10 operating systems. A client (desktop) computer must either be on or in sleep mode for remote access to work.

Can you remote access a computer that is off?

In combination with remote access software, it is a breeze to set up and use, to connect to your remote computer from anywhere even if it is powered off, in hibernation (Windows) or sleep (Mac) mode.

Can RDP wake up computer?

Remote Desktop does not have any built-in remote wake-up capability. You will need to first use Wake-On-Lan to wake up the sleeping computer, before you can RDP to it. To enable WOL on your computer, the first step is to check the hardware : Your network card must support Wake-on-LAN.

Can TeamViewer Access sleeping computer?

You can turn on a sleeping or powered-off computer using TeamViewer's Wake-on-LAN feature. This means you can control an offline computer remotely by waking it up first before you establish a connection to it.

What is unattended remote access?

Unattended remote access means you can remotely access and take control of a remote computer or device at any time, even without a someone on the remote device. Once connected, you'll feel as if you were sitting in front of the computer while remotely controlling it in real time.

Does Remote Desktop work from anywhere?

Once the remote agent is implemented, you can work on and connect with your PC from anywhere and at any time. For companies using unattended remote access software to provide support, unattended remote access allows them to deliver intermittent support services and perform maintenance activities on devices.

How do I remotely wake up on LAN?

Press Windows key + X to bring up the hidden quick access menu:Select Device Manager.Expand the Network Adapters section.Right-click the adapter that you are currently using, and then click Properties.Click on the advanced tab.Select Wake on Magic package from the list of properties.More items...•

Can TeamViewer wake up a remote computer?

You can turn on an offline computer with TeamViewer via Wake-on-LAN. This way, you can control an offline computer remotely by waking it up before you establish a connection.

How do I set up TeamViewer for unattended access?

Setting up Easy Access is… well, easy. If someone already assigned the device to your TeamViewer account: Click Extras –> Options –> Security –> under Unattended access, activate the checkbox Grant easy access –> click OK.

How do I keep TeamViewer running 24x7 for remote access?

To do so:Start TeamViewer.Select Extras > Options.Select the Advanced item on the left.Click the Show advanced options button on the right.Set Check for new version to Never and Install new versions automatically to No automatic updates. .Click OK to save your changes.

How do I wake up my computer from hibernation remotely?

Remotely Wake Computer From Sleep – Establish a Remote ConnectionAssign your computer a static IP.Configure port forwarding in your router to pass Port 9 to your PC's new static IP.Turn on WOL (Wake on LAN) in your PC's BIOS.Configure your network adapter's power settings in Windows to allow it to wake the PC.More items...

How do I wake my computer from sleeping with the keyboard?

To wake up a computer or the monitor from sleep or hibernate, move the mouse or press any key on the keyboard. If this does not work, press the power button to wake up the computer. NOTE: Monitors will wake up from sleep mode as soon as they detect a video signal from the computer.

Can Chrome Remote Desktop wake from sleep?

Can Chrome Remote Desktop wake from sleep? No, it can't. That's one of its main disadvantages compared to other remote desktop software. It's not possible to wake a sleeping computer using Chrome Remote Desktop, so you need to make sure all computers you wish to connect to are awake.

Can LogMeIn wake up a sleeping computer?

Open the LogMeIn Control Panel and navigate to Options > Preferences > Advanced Settings. Under Wake On LAN, select Enable 'Wake On LAN' from sleep and power off.

How to remotely wake a computer from sleep?

How to Remotely Wake Computer From Sleep and Establish a Remote Connection. 1. Assign your computer a static IP. 2. Configure port forwarding in your router to pass Port 9 to your PC’s new static IP. 3. Turn on WOL (Wake on LAN) in your PC’s BIOS. 4.

How to access Device Manager?

You can access the device manager by right-clicking Computer and selecting Manage and then Device Manager on the left. Alternatively you can open a run command (Windows Key+ R) and type devmgmt.msc. You should know see a list of all your computer’s devices: Device Manager.

What port does my router need to wake up?

Your computer needs to be able to receive a Magic Packet on Port 9 in order to wake up. To do this, your router has to be configured to always forward Magic Packets (on Port 9) to your computer. In order to do this your computer needs to always have the same IP address.

What is a wake on LAN?

With the Wake-on-LAN feature from TeamViewer, you can remotely access and control devices no matter whether they’re switched on or off. This not only provides great flexibility in terms of 24/7 access to devices and resources, it can also improve energy efficiency since devices can be turned off when not in use.

Why do we wake up on LAN?

Wake-on-LAN also ensures that fewer people are required to fulfil tasks: computers can be completely unattended before you connect, meaning no member of staff needs to be onsite to interact with the device for you. Companies that trust TeamViewer.

What port does Wake on LAN use?

Wake-on-LAN uses a UDP (User Datagram Protocol) port. Many utilities use ports 7 or 9, but you can use any port you like for WoL. The UDP port needs to be forwarded to all IP addresses behind your router—it’s not possible to forward it to a specific IP address.

Can you wake up TeamViewer from another computer?

The first method simply requires you to configure the hardware of the target computer and configure TeamViewer on it in order wake it up from another device connected on the network .

How to put my computer in sleep mode?

To configure Vista to go into Sleep mode automatically, select Start, Control Panel , System and Maintenance, Power Options. In the Power Options window, click the Change Plan Settings link under the currently selected power plan. Use the Put the Computer to Sleep list to select the number of minutes or hours of idle time after which Vista ...

What is sleep mode in Windows Vista?

Sleep mode is the new low-power state that Vista uses to replace the confusing Standby and Hibernate modes from earlier versions of Windows. (Standby mode preserved your work and enabled you to restart quickly, but didn't entirely shut off the machine's power; Hibernate mode preserved your work and completely shut off the machine, but also took a relatively long time to restart-faster than shutting down your computer entirely, but slower than Standby.)

How to wake on LAN?

Here are the steps to follow: 1. In the Network Connections window, right-click the connection that uses the NIC you want to configure, and then click Properties. The User Account Control dialog box appears. 2.

How to disable password on wakeup?

To disable the password requirement on wakeup, select Start, Control Panel, System and Maintenance, Power Options. In the Power Options window, click the Require a Password on Wakeup link to open the System Settings window. Click Change Settings That Are Currently Unavailable, and then enter your UAC credentials.

What happens when you sleep in standby mode?

As in Standby, you enter Sleep mode within just a few seconds. As in both Standby and Hibernate, Sleep mode preserves all your open documents, windows, and programs. As in Hibernate, Sleep mode shuts down your computer, except it maintains power to the memory chips so that it can preserve the contents of RAM for when you restart.

What does it mean when NIC doesn't support wake on LAN?

NOTE If the Allow This Device to Wake the Computer check box is disabled, it probably means your NIC doesn't support wake-on-LAN. However, it may also mean that this support has been disabled. In the NIC's Properties dialog box, display the Advanced tab and look for a property named Wake Up Capabilities.

Can you wake up a computer remotely?

However, it can be a pain if you need to access the computer remotely over your network because you have no way to wake up the sleeping computer (which normally requires a physical action such as jiggling the mouse or pressing the computer's power button). Fortunately, most new NICs support a feature called wake-on-LAN, ...