Remote-access Guide

remote access via a dial up connection

by Gianni Funk Published 2 years ago Updated 2 years ago
image

Remote access is the ability to communicate with a computer or network that is located some distance away over a dial-up connection. Remote access was the term originally used to describe connecting users to the Internet using a dial-up connection over traditional POTS or ISDN

Integrated Services Digital Network

Integrated Services Digital Network is a set of communication standards for simultaneous digital transmission of voice, video, data, and other network services over the traditional circuits of the public switched telephone network. It was first defined in 1988 in the CCITT red book. Prior to IS…

telephone lines.

What is Remote Access? Remote access is the ability to communicate with a computer or network that is located some distance away over a dial-up connection. Remote access was the term originally used to describe connecting users to the Internet using a dial-up connection over traditional POTS or ISDN telephone lines.

Full Answer

What is dial up remote access used for?

Dial-up remote access is still used today as a back-up to broadband connections. Today, most dial-up remote-access connections are used for point-of-sale (POS) devices, such as credit card terminals, meters and ticketing machines equipped with dial-up modems.

What is dial-up access and how to configure it?

Configuring dial-up access allows a remote user to dial and connect remotely to test PC with GL's analysis & simulation tools. A dial-up network connection enables you to connect to a test PC on a remote network via phone line bypassing the LAN /WAN complex security issues.

How do I set up a dial-up server?

Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet. Click Next. Click VPN for virtual private access, or click Dial-up for dial-up access, depending on the role you want to assign to this server.

What are the different types of dial-up remote access?

There are several remote access applications that are well-suited for dial-up remote access products: LAN-to-LAN connectivity, Internet/intranet access, remote user access and modem pooling. A dial-up connection between two networks is termed as an LAN-to-LAN connection.

image

What are the two variations of dial-up remote access?

There are several remote access applications that are well-suited for dial-up remote access products: LAN-to-LAN connectivity, Internet/intranet access, remote user access and modem pooling. A dial-up connection between two networks is termed as an LAN-to-LAN connection.

How do I use dial-up connection?

StartOpen the Start menu and then click on the Control Panel option.Click on the Network and Internet option.Click on the Network and Sharing Center option.Click on the Set up a new connection or network option.Click the Set up a dial-up connection option. ... Enter the following information:Click the Connect button.More items...

Is dial-up internet still available?

Although there were once many dial-up providers, most have either switched their customers over to DSL or stopped offering service altogether. In 2013, only 3% of Americans still used dial-up, and that number continues to go down. There are some providers, such as NetZero and Juno that still offer dial-up service.

What is dial-up and VPN connection?

Remote access was the term originally used to describe connecting users to the Internet using a dial-up connection over traditional POTS or ISDN telephone lines. Virtual private network (VPN) protocols are usually used to secure these private connections.

What is dial up connection in PC?

A dial-up connection uses a standard phone line and analog modem to access the Internet at data transfer rates (DTR) of up to 56 Kbps. A dial-up connection is the least expensive way to access the Internet, but it also slowest connection.

What is a dial up number?

A dial-up is a connection that's established using a modem. To make the dial-up connection, the modem must connect to an active phone line that is not in use. When connecting, the modem picks up the phone and dials a number that's attached to another computer.

What is the difference between a dial up connection and broadband?

A dialup service connects to the Internet through a phone line with a maximum speed of 56kbps. Broadband refers to a connection that has capacity to transmit large amount of data at high speed.

What is the advantage of dial up?

Advantages of dialup (dial up) internet access: Everyone has a phone line, dialup connection is available to everyone with a computer and a modem (including built-in modem). Dialup may be the only choice available for rural or remote areas where broadband connection is not available. Low cost.

What is remote access?

Remote access is the ability to communicate with a computer or network that is located some distance away over a dial-up connection. Remote access was the term originally used to describe connecting users to the Internet using a dial-up connection over traditional POTS or ISDN telephone lines. Virtual private network (VPN) protocols are usually ...

What is dial up modem?

What is Dial-Up? A dial-up connection is established when two or more communication devices use a public switched telephone network (PSTN) to connect to an Internet service provider (ISP), corporate network, or industrial network, using an analog telephone modem.

What is a Patton remote access server?

Patton remote access servers are built on advanced digital modem technology, with support for all the dial-up modem standards including V.110, V.92, V.44, V.90, K56Flex, V.34+ and digital ISDN. Patton RAS answer digital calls from T1 or E1 lines, carrying up to 30 calls from a single link to the PSTN.

Overview

Configuring dial-up access allows a remote user to dial and connect remotely to test PC with GL's analysis & simulation tools. A dial-up network connection enables you to connect to a test PC on a remote network via phone line bypassing the LAN /WAN complex security issues.

Operation - An Overview

Before you can create a Dial-Up Networking connection on client PC, the following information is required:

Server Side Dial-Up Setup

Connect the test PC on the remote network to dedicated phone line via its modem. Allow the Test PC to accept all incoming connections through dial-up. The connection on the server side has been set up to allow client access to its folders using FTP URL (Ex: ftp://remote-pc).

Client Side Dial-Up Setup

At the client PC, setup dialup connection using the phone number, valid User Name, and Password of the host computer. The Client Access dial up creates a DHCP connection to the server.

Remote Operation VNC

It is necessary for the VNC server to be running on the test PC (server) which allows the clients to start, configure, and control applications.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

How to enable remote access?

To Enable the Routing and Remote Access Service. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the left pane of the console, click the server that matches the local server name . If the icon has a red arrow in the lower-right corner, the Routing and Remote Access service isn't enabled.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

How to grant remote access to a user?

Click Start, point to All Programs, point to Administrative Tools, and then click Active Directory Users and Computers. Right-click the user account that you want to grant remote access rights to, click Properties, and then click the Dial-in tab.

Can you grant callbacks in Windows 2003?

Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9