Remote-access Guide

routing and remote access console

by Ruthe Hettinger Published 3 years ago Updated 2 years ago
image

Full Answer

How to set up routing and remote access?

  • In Routing and Remote Access, expand the server → IPV4 → NAT.
  • Right click on External Network, go to properties → Services and ports.
  • Click on Add, enter the description for this service, enter the RDP port and IP address of the VPS and click on Ok.

How about routing and remote access for Windows 10?

To Enable the Routing and Remote Access Service

  • Click Start, point to Administrative Tools, and then click Routing and Remote Access.
  • In the left pane of the console, click the server that matches the local server name. ...
  • Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. ...

More items...

How to start remote console?

To configure the Windows Server 2003-based server to permit remote control, follow these steps:

  • Open the Group Policy snap-in (Gpedit.msc).
  • In the left pane, under the Computer Configuration branch, expand the Administrative Templates branch.
  • Expand the Windows Components branch.
  • Click the Terminal Services folder.
  • In the right pane, double-click Sets rules for remote control of Terminal Services user sessions.
  • On the Setting tab, click Enabled.

More items...

How to remove routing and remote access?

  • Click Start, point to All Programs, point to Administrative Tools, and then click Active Directory Users and Computers.
  • Right-click the user account that you want to grant remote access rights to, click Properties, and then click the Dial-in tab.
  • Click Allow access to grant the user permission to dial in, and then click OK.

image

How do I access Routing and Remote Access?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

What does Routing and Remote Access do?

Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router.

What is Remote Access console?

Remote access is the ability for an authorized person to access a computer or network from a geographical distance through a network connection. Remote access enables users to connect to the systems they need when they are physically far away.

Does Windows 10 have Routing and Remote Access?

Offers routing services to businesses in local area and wide area network environments. This service also exists in Windows 7, 8, Vista and XP.

What is the main purpose of a RAS server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

What are the types of remote access?

The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Remote Access Services (RAS), and Remote Desktop Protocol (RDP).

What are three examples of remote access locations?

What Is Remote Access?Queens College.Harvard University Extension School.

Can DHCP support Remote Access?

When you enable Dynamic Host Configuration Protocol (DHCP) to assign a static IP address to an onboard network interface during first-time setup, you can complete the configuration remotely by using an SSH client. If your system includes an e0M interface, the system broadcasts a DHCP request through it.

How can I use my Windows server as a router?

Press “Start” and under “Windows Administrative Tools” find “Routing and Remote Access”. Right-click on the server name and select “Configure and Enable Routing and Remote Access”. Press “Next” at the wizard welcome screen. Choose “Network address translation (NAT)” and press “Next”.

How do I install Remote Access and routing in Windows 2016?

Steps: Enable routing on Microsoft Windows Server 2016 In Routing and Remote Access, right-click the server, and select Configure and Enable Routing and Remote Access. When the setup wizard launches, click Next. Select Custom configuration and click Next. Select LAN routing and click Next.

What is Routing and Remote Access server 2016?

RRAS stands for Routing and Remote Access Service is a feature of Windows Server operating systems family that provides additional support for TCP/IP internetworking. RRAS makes it possible to create applications to administer the routing and remote access service capabilities of the operating system.

Which authentication methods does NPS use?

NPS supports both password-based and certificate-based authentication methods. However, not all network access servers support the same authentication methods. In some cases, you might want to deploy a different authentication method based on the type of network access.

Can DHCP support Remote Access?

When you enable Dynamic Host Configuration Protocol (DHCP) to assign a static IP address to an onboard network interface during first-time setup, you can complete the configuration remotely by using an SSH client. If your system includes an e0M interface, the system broadcasts a DHCP request through it.

How do I remotely access another computer from intranet?

Setup a Remote Desktop Connection for LAN / WAN AccessEnable Remote Desktop Connection on the Host Computer. Windows Remote Desktop Properties. ... Launch Remote Desktop Connection utility on the client computer (laptop, etc.) Launch Application. ... Connect to the host computer. ... Set Options for Remote Desktop Connection.

What port is used for remote desktop access?

Two common modern protocols providing for remote access to a desktop are Virtual Network Computing (VNC), which typically runs on TCP 5900 and Remote Desktop Protocol (RDP), which typically runs on TCP port 3389.

What is RRAS support?

RRAS support is being implemented by more and more companies as their employees are beginning to work from their homes over fast DSL/Cable Internet services and VPN connections, in addition to traditional dial-up accounts. Most internal networks today use the TCP/IP protocol as the primary (or only) network/transport protocol for internal communication and resource sharing. In order to facilitate the internal use of TCP/IP for remote access, your RRAS server has to be able to allocate TCP/IP addresses to your dial-in clients, thus acting as DHCP servers.

What is a DHCPINFORM message?

When a client uses the DHCP Relay Agent to obtain an IP option from your DHCP server, the client issues a DHCPINFORM message. This message is solely for the purpose of asking your DHCP server if there are any IP options available for the network subnet on which the client is located. See Table 3.1 for more about the DHCPINFORM message.

How to set up VPN without NAT?

To set up a VPN server only, without NAT, select the first option and then you will choose VPN on the Remote Access page that offers the selections of VPN and/or Dial-up , as shown in Figure 14.26. Sign in to download full-size image. Figure 14.26. Setting up a VPN server only.

What is an ISA firewall?

The ISA firewall sports a new feature that combines the need to isolate the firewall and all Protected Networks from harm in the event that the ISA firewall is attacked, to the extent that the Firewall services are shut down. The ISA firewall accomplishes a combination of protection and protective accessibility by entering lockdown mode.

What is firewall policy?

Firewall policy rules permits outgoing traffic from the Local Host network to all networks, if allowed. If an outgoing connection is established, that connection can be used to respond to incoming traffic. For example, a DNS query can receive a DNS response on the same connection. This does not imply that lockdown mode allows an extension of existing firewall policy for outbound access from the local host network. Only existing rules allowing outbound access from the local host network are allowed.

Do all firewall administrators have the same level of control over the ISA firewall?

Not all firewall administrators should have the same level of control over the ISA firewall's configuration and management. The ISA firewall allows you to provide three levels of control over the firewall software based on the role assigned to the user.

What is DirectAccess Remote Client Management?

The DirectAccess Remote Client Management deployment scenario uses DirectAccess to maintain clients over the Internet. This section explains the scenario, including its phases, roles, features, and links to additional resources.

What permissions do remote access users need?

Admins who deploy a Remote Access server require local administrator permissions on the server and domain user permissions. In addition, the administrator requires permissions for the GPOs that are used for DirectAccess deployment.

What is DirectAccess client?

DirectAccess client computers are connected to the intranet whenever they are connected to the Internet, regardless of whether the user has signed in to the computer. They can be managed as intranet resources and kept current with Group Policy changes, operating system updates, antimalware updates, and other organizational changes.

Do I need domain admin permissions for DirectAccess?

To take advantage of the features that restrict DirectAccess deployment to only mobile computers, Domain Admin permissions are required on the domain controller to create a WMI filter. If the network location server is not located on the Remote Access server, a separate server to run it is required.

Do you need a certificate for remote access?

A certification authority is required on the server if you do not want to use self-signed certificates for IP-HTTPS or the network location server, or if you want to use client certificates for client IPsec authentication.

Do DirectAccess clients have to be domain members?

DirectAccess clients must be domain members. Domains that contain clients can belong to the same forest as the Remote Access server, or they can have a two-way trust with the Remote Access server forest or domain.

Question

Given that Windows 10 has Hyper-V how about enabling the full Routing and Remote Access Role for Windows 10. While Hyper-V is great there are a lot of development scenarios where having a real network router is essential.

Answers

As Bill said, Routing and Remote Access Services (RRAS) is a server role. Up to now. it is only available for Windows server system. Install and Enable the Routing and Remote Access Service https://technet.microsoft.com/en-us/library/ff687740 (v=ws.10).aspx

All replies

Most unlikely, I would say. RRAS has always been server OS only and don't see that changing.

What is DirectAccess Remote Client Management?

The DirectAccess Remote Client Management deployment scenario uses DirectAccess to maintain clients over the Internet. This section explains the scenario, including its phases, roles, features, and links to additional resources.

What is DirectAccess client?

DirectAccess client computers are connected to the intranet whenever they are connected to the Internet, regardless of whether the user has signed in to the computer. They can be managed as intranet resources and kept current with Group Policy changes, operating system updates, antimalware updates, and other organizational changes.

Do you need a certificate for remote access?

A certification authority is required on the server if you do not want to use self-signed certificates for IP-HTTPS or the network location server, or if you want to use client certificates for client IPsec authentication.

Do DirectAccess clients have to be domain members?

DirectAccess clients must be domain members. Domains that contain clients can belong to the same forest as the Remote Access server, or they can have a two-way trust with the Remote Access server forest or domain.

Installing the Routing and Remote Access Role

1. Log into the server with administrative credentials 2. Open Server Manager 3. On the Dashboard, locate and click Add roles and features 4. Click Next to skip the Before you begin page 5. Choose Role-based or feature-based installation and click Next

Configure the Remote Access Role

Now that the installation is completed, we will want to actually configure the role.

What domain is Remote Access Server?

The Remote Access server and all DirectAccess client computers must be joined to an Active Directory domain . DirectAccess client computers must be a member of one of the following domain types:

How many Group Policy Objects are required for remote access?

To deploy Remote Access, you require a minimum of two Group Policy Objects. One Group Policy Object contains settings for the Remote Access server, and one contains settings for DirectAccess client computers. When you configure Remote Access, the wizard automatically creates the required Group Policy Objects.

How to join a remote server to a domain?

To join the Remote Access server to a domain. In Server Manager, click Local Server. In the details pane, click the link next to Computer name. In the System Properties dialog box, click the Computer Name tab, and then click Change.

What happens when you configure a website on a remote server?

If the network location server website is located on the Remote Access server, a website will be created automatically when you configure Remote Access and it is bound to the server certificate that you provide. There are two certificate options for the network location server certificate: Private. Note.

What are DirectAccess settings?

The DirectAccess settings that are contained in the client computer Group Policy Object are applied only to computers that are members of the security groups that you specify when configuring Remote Access.

What port is TCP port 443?

Transmission Control Protocol (TCP) destination port 443, and TCP source port 443 outbound. When the Remote Access server has a single network adapter, and the network location server is on the Remote Access server, then TCP port 62000 is also required.

Can you use Kerberos authentication on Remote Access Server 2012?

With Remote Access in Windows Server 2012 , you to choose between using certificates for computer authentication or using a built-in Kerberos authentication that uses user names and passwords. You must also configure an IP-HTTPS certificate on the Remote Access server. This section explains how to configure these certificates.

How to install Remote Access on DirectAccess?

On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

How to configure deployment type?

On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9