Remote-access Guide

routing and remote access server 2012

by Dr. Tanner Cassin Published 2 years ago Updated 2 years ago
image

Routing and Remote Access in Windows Server 2012 - Part 1

  1. First of all open your Server Manager. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it ...
  2. The next page is for selecting the "Installation type." Select the first option and then click on "Next".
  3. On the next page you must select the rolls to be installed. ...

More items...

Full Answer

How to install routing and remote access on Windows Server 2012 R2?

Follow these steps to install the routing and remote access role on Windows Server 2012 R2. Procedure Open the Windows Server 2012 Server Manager. From the Server Manager Dashboard, select Manage> Add Roles and Features. Click Nextto display the Select Server Roleswindow. Select the Remote Accesscheck box.

How do I install the remote access role?

You must install the Remote Access role on a server in your organization that will act as the Remote Access server. On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen.

What is routing and Remote Access Service (RRAS)?

The Routing and Remote Access service (RRAS) supports remote user or site-to-site connectivity by using virtual private network (VPN) or dial-up connections. RRAS provides the following features. RRAS Multitenant Gateway.

How do I enable or disable routing and remote access server?

You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message. Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard.

image

What is Windows Routing and Remote Access?

Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router. Developers can also use RRAS to implement routing protocols.

What is routing in Windows Server 2012?

Instructions. Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I remotely access a Windows 2012 server?

Remote Desktop Services for Windows Server 2012Open the Server Manager Dashboard.Click Add Roles and Features.Choose Role-based or feature-based installation.Select current server from the pool.Select Remote Desktop Services.Select Remote Desktop Licensing and Remote Desktop Session Host.More items...•

How do I access Routing and Remote Access?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

What is the use of routing and remote access service?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

What is Routing and Remote Access server 2016?

RRAS stands for Routing and Remote Access Service is a feature of Windows Server operating systems family that provides additional support for TCP/IP internetworking. RRAS makes it possible to create applications to administer the routing and remote access service capabilities of the operating system.

How can I access a server remotely?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I connect to a Windows server remotely?

PrerequisiteOpen the Remote Desktop Connection. ... In the Remote Desktop Connection window, click Options (Windows 7) or Show options (Windows 8, Windows 10).Type the IP address of your server.In the User name field, enter the user name.Optional: To save the access data, select the Allow saving data check box.More items...

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

Can DHCP support Remote Access?

When you enable Dynamic Host Configuration Protocol (DHCP) to assign a static IP address to an onboard network interface during first-time setup, you can complete the configuration remotely by using an SSH client. If your system includes an e0M interface, the system broadcasts a DHCP request through it.

How do I configure Windows Server Routing?

Right-click the server, and select Configure and Enable Routing and Remote Access.When the wizard opens, click Next.Select Network address translation (NAT) and click Next.Select the network interface that your users will use to connect to the internet, and then click Next.More items...

Where is the routing table stored in Windows?

If you want to see the routing tables, you will have to open a Command Prompt window and then enter the ROUTE PRINT command. Upon doing so, you will see a screen similar to the one that's shown in Figure A.

Can a Windows server be a router?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I print a route?

Click Start, click Run, type cmd in the Open box, and then click OK. Type route print, and then press ENTER to view the routing table. Note the interface number of the network interface that you re-added. Type route print to verify that the new default route appears in the routing table.

How do I turn my Windows server into a router 2016?

Steps: Enable routing on Microsoft Windows Server 2016 In Routing and Remote Access, right-click the server, and select Configure and Enable Routing and Remote Access. When the setup wizard launches, click Next. Select Custom configuration and click Next. Select LAN routing and click Next.

What is R2 routing?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them .#N#To install this feature complete the steps below.

How to add roles and features to a server?

To start, from Server Manager click Manage > Add Roles and Features. On the Before You Begin page, click Next. Select Role-based or feature-based installation and click Next. On Server Selection select the server you want to install the feature on and click Next.

What is a RRAS server?

In Windows Server® 2012 R2 and Windows Server® 2012 the Remote Access server role provides centralized administration, configuration, and monitoring of both DirectAccess and VPN-based remote access services with the Routing and Remote Access Service (RRAS). Both DirectAccess and RRAS can now be deployed on the same Edge server and managed by using Windows PowerShell commands and the Remote Access Microsoft Management Console (MMC).

What is a rras?

The Routing and Remote Access service (RRAS) supports remote user or site-to-site connectivity by using virtual private network (VPN) or dial-up connections. RRAS provides the following features.

How to enable remote access to a server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.

How to reconfigure a server?

To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

Can you grant callbacks in Windows 2003?

Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.

How to install Remote Access Server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

How to change VPN to SSTP?

Click the Security Tab -> Change type of VPN to SSTP. By default, it detects the type of VPN automatically, but slightly slows down the process.

How to launch NPS in RRAS?

Once you’ve returned to the RRAS window, *left-click* Remote Access Logging and Policies. Then right-click and Launch NPS.

What OS is SSTP?

SSTP was introduced in Windows Vista, so the OS must be Vista or Greater ( or Server 2008 and greater). Go to Network and Sharing Center. Click Setup New Connection or Network.

Can you use NAP to access VPN?

Enter your user information. Don’t forget that if you didn’t setup a Group to access the VPN using NAP , you’ll need to enable Dial-In access within Active Directory Users and Computers for that user.

Can you skip the next section of VPN?

If you don’t want to add any additional security (IP restrictions, Group Access to VPN), then you can skip the next section and jump to setting up the client. I find it super interesting, though. I’d give it at least a glance.

Does RRAS work with IIS?

It will force you to install IIS, which is odd, because RRAS can work independently of IIS (you can even stop and disable IIS and RRAS will still work). I would think just the IIS Hostable Web Core would be enough, but whatever. It’s required. Go ahead and accept that it will be installed.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9