From your laptop (or PC) just open a web browser and type the IP address of your router. It should pop-up a screen asking for the username and password. This configuration works to allow you to remotely access the DVR via a web browser by using a specific port (HTTP) that is found in the DVR's network menu.
Full Answer
How to set up remote access on Samsung Smart TV?
Step 1. Select Source on Smart Hub menu, and then choose Remote Access. Step 2. Select Remote PC in Remote Access menu panel. Step 3. Enter your computer’s IP address and user ID and password of you PC. Note: This feature is only available on 2019 and newer TV models.
How do I remotely access the DVR?
This configuration works to allow you to remotely access the DVR via a web browser by using a specific port (HTTP) that is found in the DVR's network menu. As long as you have the necessary information you can configure the router.
What port does the DVR remote view use?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777). The router knows how to handle the request for both ports and will send the traffic to the DVR that inside your local network.
Why can't I access my DVR from outside the network?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
How do I access my Samsung DVR remotely?
0:262:47How To Setup Your DVR for Remote View (New 2017)Port Forwarding ...YouTubeStart of suggested clipEnd of suggested clipSo now all you have to do is connect your DVR to your router like you normally would and then goMoreSo now all you have to do is connect your DVR to your router like you normally would and then go into your menu in the network settings right here network settings and under this tab that says net.
Can I access my DVR remotely?
DVRs/NVRs that have a built-in network capability can be accessed over the internet remotely or outside your home network on a computer, desktop video surveillance software, phone apps or web browsers.
How do I connect my Samsung DVR to my phone?
To get this information, go to Main Menu>Settings>Network in the interface.Add DVR to Device Manager.Adding Cameras to Live Preview.Access the DVR Externally.How to Connect a DVR Using an Android Phone.
How do I setup my DVR for remote access?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How can I access my DVR from my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
How can I view my DVR from my phone?
0:433:37How to Connect a CCTV System to your Phone or Tablet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we need the MUX one up if you go to the app store on air on Apple or Google Play Store forMoreSo we need the MUX one up if you go to the app store on air on Apple or Google Play Store for Android download. The app is called max 1m a double X o n E. That's the first thing you'll need over
How do I connect my DVR to Wi-Fi?
0:473:10How to Connect a CCTV DVR to a Wireless Router - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe DVR is hardwired to my wireless bridge using a cat5e cable. I am using an AP 3500 for my Wi-FiMoreThe DVR is hardwired to my wireless bridge using a cat5e cable. I am using an AP 3500 for my Wi-Fi bridge which is a multi-purpose wireless.
Why can't I view my CCTV on my phone?
Why can't I see my CCTV on my phone? There may be times when you struggle to connect your CCTV to your phone or computer through the app. The first thing to check is your Internet Router. It's possible it is no longer sending an internet connection to your CCTV Recorder (DVR / NVR).
How can I view my security cameras online?
Security Camera Live Feed via Web BrowserFind your security camera's IP address.Open a browser of your choice and type in the IP address.Enter login information.Find the HTTP port number used by the cameras and change the port number.Reboot the security camera so you can save the changes.More items...•
How can I remotely access my DVR without static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
How do I find the public IP address of my DVR?
If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.
How do I find the IP address for my DVR?
0:152:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How can I remotely access my DVR without static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
How can I monitor my CCTV remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I access my DVR?
1:1312:01How to Setup your DVR NVR for Remote View Step By ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow in your DVR or MBR click on the bottom left hand side on the Start menu. So you can log into theMoreNow in your DVR or MBR click on the bottom left hand side on the Start menu. So you can log into the menu of the DVR or MBR. Select logging and then type in the username. And password of the vbr. The
How do I connect my DVR to the Internet wirelessly?
0:102:02CCTV Tutorial How to connect DVR & NVR to WiFi - YouTubeYouTubeStart of suggested clipEnd of suggested clipOption you need to enable the dhcp. Click on apply once you click on apply click on search option toMoreOption you need to enable the dhcp. Click on apply once you click on apply click on search option to scan your network.
How does Remote Access work?
It is the Remote PC that you can remotely control your PC through an IP network, Screen Sharing that mirrors a PC or smartphone connected to the same Wi-Fi network, and the Office 365 function that can be accessed directly using the TV web browser.
When to use remote access?
Use Remote Access when you work and learn at home. As days go by, the functions that can be performed on TV are becoming increasingly developed. The TV itself also supports many features, and if your personal computer is available as it is on the TV, the possibilities of what you can do will be more extensive.
How to connect to a remote PC?
How to connect to remote PC. Step 1. Select Source on Smart Hub menu, and then choose Remote Access. Step 2. Select Remote PC in Remote Access menu panel. Step 3. Enter your computer’s IP address and user ID and password of you PC. Note: This feature is only available on 2019 and newer TV models.
How to activate remote desktop?
You need to make sure that the Remote Desktop setting on your PC is activated. Navigate System menu in your PC control panel, and select the Remote Desktop, then switch to activate Remote Desktop Activation. If MAC PC connection using VNC is too slow, app installation and additional setting to lower resolution needed.
How to access my PC from my TV?
First of all, you need to know your PC's correct IP address, username, and password in order to use the remote PC features. Make sure your keyboard and mouse are connected to the TV, and follow the guide on how to access to your PC on the TV. Step 1. Select Source on Smart Hub menu, and then choose Remote Access.
How to share screen on TV?
To share your PC's screen on your TV, or vice versa, use the on-screen instructions to adjust your setting and connect the TV to a computer using Wi-fi. Step 1. On your PC, select Management Center or Device in the notification area of the taskbar. Step 2.
What is remote access on smart TV?
Remote Access allows users to directly control their devices connected to a TV with a keyboard and mouse in addition to simply displaying the content on a larger screen. Additionally, web browser-based cloud office service can be accessed through Remote Access, so users can now access files and work on documents from their Smart TVs.
Can I remotely access my PC through my TV?
Without a separate HDMI cable connection, users can remotely access a PC in their room through the TV in their living room to perform various tasks including surfing the web or playing games from their TV’s screen using a connected keyboard and mouse. Remote Access allows users to directly control their devices connected to a TV with a keyboard ...
How to access DVR from outside network?
The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.
How to know if your DVR is on the same network as your home network?
First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.
Do I need to pay attention to IP addresses when adding a DVR?
Now when adding a DVR/NVR, or even IP cameras, you need to pay close attention to the IP addresses that are being used by other devices in that network. This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, ...
Can I access my DVR from my router?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
What port is the DVR on my router?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777). The router knows how to handle the request for both ports and will send the traffic to the DVR that inside your local network.
What is the default port for a DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
NET-i viewer
NET-i viewer is the free monitoring program which enables the centralized monitoring of Samsung Techwin’s DVR and other network products.
iVMS 4200
iVMS-4200 Intelligent Video Management System is a newly designed colligation software which includes not only ...
Video Viewer
Video Viewer is free software for AVTECH users to manage up to 16 devices on a Windows PC.
Pro Surveillance System
Pro Surveillance System is a program that enables you to control your DVR, SVR, NVR, NVS, IPC and NVD devices.
NetDVR Client
The NetDVR software allows you to easily connect into your DVR-7000 series h.
DVR Remote Viewer
DVR Remote Viewer is an application used for connecting to security camera.
iVMS 4000
The iVMS-4000 is the client application specially developed for the embedded DVR/DVS.
What do I get with a subscription?
With your subscription - you'll gain access to our exclusive IT community of thousands of IT pros. You'll also be able to connect with highly specified Experts to get personalized solutions to your troubleshooting & research questions. It’s like crowd-sourced consulting.
Who are the certified experts?
Our certified Experts are CTOs, CISOs, and Technical Architects who answer questions, write articles, and produce videos on Experts Exchange. 99% of them have full time tech jobs - they volunteer their time to help other people in the technology industry learn and succeed.
How quickly will I get my solution?
We can't guarantee quick solutions - Experts Exchange isn't a help desk. We're a community of IT professionals committed to sharing knowledge. Our experts volunteer their time to help other people in the technology industry learn and succeed.
