Log in to the NAS’ Dashboard as an Administrator Click “Device Manager” and open “Network” under “Customize” Go to the Remote Access Tab Select the drop-down menu next to “Remote Access” and select “DynDNS”
Full Answer
How do I connect to Seagate personal cloud using iOS?
iOS More icon: 1 Tap Settings . 2 Tap Remote Access . 3 Tap Seagate Personal Cloud . 4 Enter your Seagate Access account credentials.
Will I lose remote access to my Seagate NAS?
However, you will not lose remote access to the files on your Seagate NAS since it can be configured and accessed using the FTP/SFTP service. Similarly, your Seagate NAS will not change for standard network access within the home or office network using common network protocols on macOS and Windows.
How do I access my photos remotely with Seagate access?
Since the photos are stored on your Personal Cloud at home, you can access them remotely with your Seagate Access account. Seagate Media is installed on your Android or iOS phone and linked to your Seagate Access account. To show the photos, you open Seagate Media and choose your Personal Cloud.
How do I activate Seagate access?
Seagate Access account, which allows you to access your Personal Cloud remotely and enable remote access for other users A message is sent to your email account with the confirmation link or code needed to activate your Seagate Access account. Note: Check your spam folder if you don’t find an email in your Inbox.
What is remote access to NAS?
Does Sdrive have NAS?
About this website
How do I access my Seagate Personal Cloud remotely?
Seagate Access is an account that you use to remotely access your Personal Cloud....Access Personal Cloud content using a web browserOpen a web browser and go to personalcloud.seagate.com.Sign in with your email address and password.Your NAS OS devices are listed. Click on the Personal Cloud you would like to access.
How do I fix my Seagate Personal Cloud?
Maximum protection: repairAccess your Personal Cloud. ... Open the Public folder and then double-click Personal Cloud.Sign into your Personal Cloud 2-bay.On the Network Drives page (lower left), click Manage. ... Choose Repair and then click Next.Select the new hard drive and then click Next.More items...
How do I connect my Seagate Personal Cloud directly to my computer?
You can do this by connecting the Seagate Central directly to the Ethernet port of your computer. To do so, disconnect the Seagate Central from the router. Once it's powered off, turn your computer off as well. Connect the drive directly to the computer's Ethernet port and plug in the Seagate Central's power supply.
Can't connect to Seagate NAS?
If the Seagate Business NAS is still not showing up on your network: Verify the NAS is directly connected to the same router as the computer you are attempting to connect from. Consider restarting the router. During initial configuration it is advised to avoid using ethernet hubs and switches.
How do I access my Seagate NAS drive?
Access NAS OS using Seagate Network AssistantLaunch Seagate Network Assistant.Choose your device: Windows: Right-click on the Seagate Network Assistant icon in the taskbar to select your Seagate NAS. ... Select Web access to the NAS OS.The NAS OS login page will launch in an Internet browser.
How do I find my Seagate IP address?
Please follow this procedure to find the IP address of your Seagate Central in Windows:Press the Windows key + R.In the Run window, type: cmd.Press Enter.In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)Press Enter.
Can't connect Seagate external hard drive?
Basic hardware troubleshooting steps:Try connecting the drive to a different port on the computer.If possible, try using a different cable.Try using the drive on a different computer.Verify the drive light is on. ... Try a different power outlet.More items...
What is the default username and password for Seagate Central?
Username: the default username is admin. To change it, enter a username from 1-20 alphanumeric characters. Password: from 4-20 alphanumeric characters. Consider using a strong password that is difficult for others to guess.
How do I setup a personal cloud at home?
0:302:23The Fix - DIY: Create your own cloud - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get started the first thing I'll do is plug in the my cloud directly into my router. Then useMoreTo get started the first thing I'll do is plug in the my cloud directly into my router. Then use Western Digital software to set up the device. I'll create a user account.
Can't see NAS drive on network?
If you're still unable to see/access the NAS device on Windows 10, try accessing it from a working Windows 8 or lower version of the Windows system on the same network as NAS. If the NAS device is still invisible, there might be some issues with your NAS device. In such a case, your data on NAS disks might be at risk.
How do I make my network NAS visible?
0:114:09NAS Drive NOT VISIBLE on Network Windows 11 FIX [Tutorial] - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect network internet on the left side. And on the right side select proxy go ahead and left clickMoreSelect network internet on the left side. And on the right side select proxy go ahead and left click on that. And then versus use a proxy server if it's turned on here so it'll say user proxy server.
How do I connect my Seagate Personal Cloud via USB?
Ingest from an external driveConnect your external USB hard drive to one of the Personal Cloud's USB ports. ... Open Filebrowser.The following message appears: External storage connected. ... Click Copy to Seagate Device Name.Select the folders and files you want to copy and click Copy.More items...
How do I reset my Seagate external hard drive?
Reset using the buttonPower down the Seagate Central by unplugging it from power.Wait approximately 15 seconds.Power up the Seagate Central again.Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes. ... Wait until the light becomes solidly illuminated.
How do I reset my Seagate NAS?
Insert a paperclip or other small tool into the reset hole located on the back of the device. Hold for 10 seconds and release. The device's name reverts to: BA-XXXXXX. Any static IP addresses that you have assigned are also reset.
How do I reset my Seagate Personal Cloud password?
Reset your Seagate Access account password with the Personal Cloud web appGo to PersonalCloud.seagate.com.Click the Forgot password link.Enter the email address associated with your remote access account.An email will be sent to your email account. ... Enter your new password and click Reset.More items...
What happened to Seagate NAS?
Note: NAS OS 4, the operating system used for our NAS devices, will be officially End-of-Life effective July 18th, 2022. This change will not affect the data on your NAS device, but NAS OS will no longer be receiving any updates, including security updates.
NAS Remote Access? : Seagate - reddit
I've had expansion drives, and backup plus drives, and I'm also using backup plus hub drives. Aside from physical differences on the outside, what's the difference between the expansion, bup and Beskar Ingot drives?. I have around 4x backup plus drives (2TB) and someone is gifting me with a Beskar Ingot drive, which, based on their website, is a gaming drive.
Seagate Global Access User Guide
Using the Sign In Page 1 Seagate Global Access Using Web Access Note: Although you can store and work with files 2 GB or larger on your Central Axis, you cannot access or add files 2 GB or larger via the Seagate Global Access website. The Web Access feature allows you to use t he Seagate Global Access website to access,
What is a Seagate access account?
Seagate Access is an account that you use to remotely access your Personal Cloud. Generally, the Personal Cloud owner’s Seagate Access account is created automatically when first configuring the Personal cloud. The owner then creates Seagate Access accounts for other users.
Where is Seagate Media installed?
Seagate Media is installed on your Android or iOS phone and linked to your Seagate Access account. To show the photos, you open Seagate Media and choose your Personal Cloud.
What is Seagate Media app?
Seagate Media is an app for viewing and listening to media files on mobile devices. Install Seagate Media on your Android and iOS devices to access movies, photos and music stored on your Personal Cloud.
How to open personal cloud on PC?
PC only—In File Explorer under Networks, click PersonalCloud. Open the Public folder and then double-click Personal Cloud.
Does Seagate have access to personal cloud?
The owner of your Personal Cloud should have sent you an invitation email with instructions on how to link your account to the Personal Cloud. Contact the owner of your Personal Cloud if you do not know your Seagate Access credentials.
Can you add users to a Quick Start?
If you followed the quick start guide and were successful setting up your device and adding your owner account, you can start adding users.
Do you need to confirm your Seagate account before you can give other users remote access?
Note: You also need to confirm your Seagate Access account before you can give other users remote access.
What port does FTP fill in?
For FTP fill in port 21 when asked for a Port number
Why change port on network?
You might choose to change the port for extra security or because another device on the Network is already using the default port.
How to transfer files between NAS servers?
Once connected you’ll be able to drag and drop files to upload or download, or you can use “copy and paste” to start a file transfer between the NAS server and the current remote location.
Is Seagate Access still available?
Even though the Seagate Access and MyNAS remote services are being discontinued, there are still other more manual methods available to continue accessing your Seagate and LaCie NAS OS 4 devices remotely. Find more information about these methods and how to configure them below:
What is iPassConnect?
Answer: iPassConnect is remote access dial-up a software application which replaces the PAL client for "dial-up" users. The iPassConnect client is a simple, easy-to-use desktop client that allows remote users to connect to the Internet through iPass' global network of providers.
Does Seagate have a dial up VPN?
Answer: Yes . While iPass will create the "dial-up" internet connection, you must have Check Point VPN installed to connect to Seagate's internal network. Check Point VPN then "piggy-backs" over the iPass connection to get to Seagate.
What is remote access to NAS?
FTP (see FTP) While Sdrive and MyNAS are easy to configure, they differ in accessing data and managing the NAS from remote locations: Sdrive is an application with file system integration. Once Sdrive is launched, a separate volume becomes available on your computer similar ...
Does Sdrive have NAS?
Sdrive also gives you access to NAS OS. MyNAS provides direct access to NAS OS using an Internet browser and does not require additional software. However, file integration is not available with MyNAS so files must be uploaded and downloaded via the File Browser (see File Browser ). ×.
