setup remote access windows xp

• Click Start > All Programs > Accessories > Communications > Remote Desktop Connection
• In the Remote Desktop Connection dialog box, in the Computer box, type the name or IP address of a computer running Windows XP Professional for which you have Remote Desktop ...
• Click Connect
• In the Log On to Windows dialog box, type your user name, password, and domain (if required), and then click OK

Full Answer

How do you turn on remote access remotely?

To enable remote access on a software install:

• Log into your local UniFi Network application as usual.
• Navigate to System Settings > Administration.
• Turn the Enable Remote Access feature ON.
• Enter your Ubiquiti account credentials to Remote Access Portal credentials on the login request and select Enable Remote Access. ...

More items...

How to turn on remote desktop on Windows XP?

Using Remote Desktop with Windows XP Professional

• Get Remote Desktop. If you don’t have it, then you need to get it. ...
• Install the Client Software. Insert the Windows XP CD into your CD-ROM drive. ...
• Enable Your Computer as the Host. ...
• Remote Desktop and XP Service Pack 2. ...
• Start a Session. ...
• To open a saved connection. ...
• To log off and end the session. ...

How to enable auto login in Windows XP?

How to Enable Automatic Logon on Windows XP Open the Start menu. It's located in the lower left-hand corner of the screen. Select "Settings", then open "Control Panel". The Control Panel program lets you make changes to your system settings. Double-click the "User Accounts" folder. You'll be able to edit your account settings from here. Click on the "pick an account to change" option. Choose your default account name when it comes up. Your "default account name" will reflect the ... Click on the "Remove my Password" link. When the computer prompts you to enter your password, do so. When prompted, click "Remove Password" to ... See More....

How do you enable remote desktop access?

To enable remote connections on Windows 10, use these steps:

• Open Control Panel.
• Click on System and Security.
• Under the “System” section, click the Allow remote access option ...
• Click the Remote tab.
• Under the “Remote Desktop” section, check the Allow remote connections to this computer option.

Can Windows 10 Remote Desktop to Windows XP?

Yes Remote Desktop connection in Windows 10 will work to connect to Windows XP if and only if it is of professional edition.

Does VNC work on Windows XP?

Through the use of VNC and port-forwarding, you can control your Windows Vista or Windows XP computer from inside and outside your local area network.

How do I set up remote access on Windows?

How to enable Remote DesktopOn the device you want to connect to, select Start and then click the Settings icon on the left.Select the System group followed by the Remote Desktop item.Use the slider to enable Remote Desktop.It is also recommended to keep the PC awake and discoverable to facilitate connections.More items...•

How do I set up remote user access?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

Is there a free version of VNC?

VNC® Connect is the latest version of our remote access software for personal and commercial use. It consists of a VNC® Server app for the computer you want to control, which must be licensed, and a VNC® Viewer app that you are free to download to all the devices you want to control from.

How do I set up VNC viewer?

On the device you want to control fromDownload VNC Viewer.Install the VNC Viewer program.Sign in using your RealVNC account credentials. You should see the remote computer appear in your team:Click or tap to connect. You are prompted to authenticate to VNC Server.

How do I remotely connect to another computer?

Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.

How can I remote into another computer using IP address?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How do I remote into another computer from my network?

How to Remotely Access Another Computer Outside Your NetworkOpen a web browser. ... Then type what is my IP into the address bar.Next, copy the public IP address listed. ... Then open TCP port 3389 on your router. ... Next, open the Remote Desktop Connection app. ... Enter your public IP address in the Computer field.More items...•

How do I allow login through Remote Desktop?

Start > Run > gpedit. msc. Expand: Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Management. Select: Allow log on through Remote Desktop Services.

How to connect to a remote desktop?

Go to Start, Control Panel, and click on System. Click on the Remote tab and make sure that the “Allows users to connect remotely to this computer” box is checked. Don’t worry about clicking the Select Remote Users button because Administrators have access by default. If you want to give an non-administrator account remote desktop access, then click that button and add the user.

How to connect to XP from Windows 7?

If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start and perform a search for remote desktop connection. On Windows 8, go to the Start Screen and start typing to perform a search. In the dialog box, you can type in the IP address or the name of the computer. ...

How to connect to a computer with an IP address?

In order to get the IP address of the computer you want to connect to, go to the computer and click on Start, Run and type in CMD. In the black command window, type in the word “ ipconfig ” without the quotes as shown below and press Enter.

How to connect to XP from another computer?

In order to connect, go to the other computer and click on Start, All programs, Accessories, Communications, and Remote Desktop Connection. If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start ...

What port does remote desktop use?

Be default, remote desktop uses port 3389, so type that into both the internal and export port boxes. Lastly, the internal IP address should be the IP address of the XP machine. On some setups, you’ll be asked for a starting port, ending port and triggering port. Just put 3389 for any port boxes.

How to find the IP address of my router?

You’ll need to log into your router by typing it’s IP address into the browser address bar. You can figure out the IP address of your router by going to any computer on your network (that you want to connect into) and opening the command prompt like we did above and typing ipconfig again. In addition to the IP Address field, you’ll also see Default Gateway, this is your router. From the above screenshot, you can see mine is 192.168.244.2.

How to get a public IP address?

First, you have to get your public IP Address (not the 192.168.x.x number) and you can do this by going to the computer you want to connect into and navigating to the web site http://www.whatismyip.com/ and this will give you your public IP address. This is the address that can be used from anywhere in the world to connect to your specific location and is unique. Unfortunately, on most home connections, this public IP address changes often and without notice. Basically to solve that problem, you have to use dynamic DNS. I won’t go into much detail in this post, but read my other posts on how to configure it:

How to enable remote desktop access?

To ensure a remote system is configured to support Remote Desktop, follow these steps: Click Start. Click Control Panel. Select Performance and Maintenance and click System (if the view is set to Category; if the Classic View is in use simply click the Control Panel’s System applet).

What is remote desktop in Windows XP?

Microsoft Windows XP's Remote Desktop application biggest benefit is that it provides access to a desktop as if you were sitting in front of the system. Follow these steps to configure Windows Remote Desktop and administer systems remotely.

What operating system is used to host a remote desktop?

The local system (the PC connecting to the remote desktop that will serve as the host) must be running Windows XP Professional (or a Windows 2003-flavor server) or have the appropriate Terminal Services tools installed.

How to open remote desktop?

The older Windows system can now open the Remote Desktop Connection menu by clicking Start | Programs | Accessories | Communications | Remote Desktop Connection or by opening a command prompt and typing mstsc.

How to access Windows firewall?

Access the Windows Firewall menu (by clicking Windows Firewall using Control Panel’s Category View or by clicking Security Center and selecting Windows Firewall using the Classic Vew).

Where to insert Windows XP Professional CD?

Insert a Windows XP Professional CD in the local system’s CD or DVD drive.

Can I access network shares on Windows XP?

In addition to receiving the actual desktop GUI, you can access network shares and printers as if seated at the PC. While remote users can request help using Windows XP’s Remote Assistance feature, often administrators must update settings and make configuration changes to remote machines.

How to allow remote access to XP?

If you want to limit access to the XP remote access server computer only, select the Networking tab in the Incoming Connections Properties box. Click Internet Protocol (TCP/IP) and click the Properties button. On the Incoming TCP/IP Properties page, uncheck the box under Network Access that says Allow Callers To Access My Local Area Network.

What type of connection does Windows XP support?

There are two different types of incoming remote access connections supported by Windows XP: dial-up and virtual private networking (VPN). There are advantages and disadvantages to each. To accept incoming dial-up connections, you need a modem and phone line attached to the remote access server computer. The client that is dialing in will also need a modem and phone line. To accept incoming VPN connections, the remote access server computer must be connected to an always-on Internet connection (such as DSL, cable, T-carrier, or dedicated ISDN).

How to call back a remote user?

To do this, click the Users tab of the Incoming Connections properties sheet, highlight the user for whom you want to require callback, and click the Properties button.

What is the TCP/IP properties box?

The Incoming TCP/IP Properties box has a checkbox that you can check to allow calling computers to specify their own IP address instead of assigning them one via DHCP or from a defined range.

Why is my remote user disconnected?

The first thing to check is the Users tab, to ensure that the account has been given the right to connect remotely . Another problem may be that you have configured the remote access server to require all users to secure their passwords and data. You can uncheck this box on the Users tab or instruct the users to use securely encrypted passwords and data.

Why is remote access not working?

Many remote access problems are caused by configuration or hardware difficulties at the client end.

What is the difference between a remote access connection and an on-site connection?

The big difference between a remote access connection and an on-site one is speed; at the physical level, the phone lines are a much slower means of transmission than the Ethernet used to connect computers on-site. If the computer from which you’re connecting (the remote access client) has the Windows Terminal Services client or ...

How to connect to a computer remotely?

Open the System Applet in the Control Panel. Click Start => Control Panel => System Applet => Remote Tab. On the Remote tab, select the Allow users to connect remotely to this computer check box, as shown below. Make sure that you have the proper permissions to connect to a computer remotely, and click OK.

How to use Remote Desktop as host?

One of the first things you will need to do is to ‘enable’ the remote control of a system . To do that, you will need to make a quick setting change in the System Properties.

What is Remote Desktop?

With the Remote Desktop feature in Windows XP, you can remotely control a computer from another office, from home, or while traveling. This allows you to use the data, applications, and network resources that are on your office computer, without being in your office. In the Illustration below, you can see that an Systems Administrator can quickly (and securely) get into their corporate offices and do that, system down, no problem, you can fix from anywhere you can find an Internet connection that is stable enough to let you work.

How to log in to Windows with domain?

In the Log On to Windows dialog box, type your user name, password, and domain (if required), and then click OK.

How to edit a RDP file?

To edit an *.rdp file and change the connections settings it contains, right-click the file and then click Edit.

Can I remotely access a server without a VPN?

Remember, as I laid out in the diagram in the beginning of this article, you must first establish a virtual private network (VPN) connection or remote access service (RAS) connection from your client computer to your office network. Without a connection ‘into’ the corporate network, you will not be able to remote a server, especially if its not internet facing *like on a DMZ* and using a private RFC 1918 address.

Can you use Remote Desktop over a slow connection?

Display data and keyboard data are sent over a WAN or Internet connection so make sure that you are working over a good connection… to use Remote Desktop over a slow connection could be a burden. It will work, but it may not respond as well as you would like. You can use low bandwidth connections, it will allow you to remotely control a system.

How to use Remote Desktop on Windows 10?

Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...

How to connect to a remote desktop?

Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How to check if Windows 10 Home is remote?

To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.

What happens if you log into a remote desktop?

you log in remotely using Remote Desktop, then the console session is. disconnected. Conversely if you log into the console then any remote. session will be disconnected. The good news is that if you log in using. the same account applications remain running and you can effectively.

Does Windows XP Pro have remote desktop?

Windows XP Pro includes functionality to access the computer's desktop across a network. Remote Desktop must be enabled and configured properly.

Can I use remote desktop across the internet?

remote-desktop to the boot sequence or to change BIOS settings. As I mentioned earlier, you can happily use remote desktop across. the internet as long as the server is not protected by a firewall such as. a broadband router.