The only sensible option it seems, if you need to be able to access the RV50 (or any equipment behind it) from the “outside”, is to have a cloud server act as your gateway and make the RV50 or some equipment behind it connect up to this. Either using an SSH tunnel or a VPN.
Full Answer
What is the Airlink Raven rv50 Industrial Gateway?
The AirLink® Raven RV50 is the industry’s lowest power LTE gateway. Simple to install and easy to manage, the Raven RV50 industrial gateway is designed to connect critical assets and infrastructure.
How do I connect my Airlink rv50 to my computer?
First connect the RV50 directly to your computer and follow the instructions in the AirLink RV50 manual to connect to the device. Default Ethernet settings for access are as follows:
How does Sierra Wireless Airlink rv50 work with ignition SMS Notification Module?
This article describes how to set up Sierra Wireless AirLink RV50 device to work with Ignition SMS Notification module. In such a setup, the purpose of AirLink RV50 is to send and receive SMS messages. Essentially, it is going to be utilized as an SMS gateway. Ignition picks up information from a PLC that the water temperature is too hot.
How do I update the firmware on my Sierra Wireless Airlink rv50?
Go to the Sierra Wireless AirLink RV50 Firmware Packages page and check if the firmware installed is the same version as the newest RV50 ALEOS firmware available. As of this writing, the current version is RV50 ALEOS 4.9.0. If the firmware on your AirLink RV50 is not the latest version, download the newest firmware.
How do I log into my Sierra Wireless modem?
Open an internet browser and connect to AceManager. If you are physically connected to the modem's Ethernet port, or on the Local Area Network (LAN) via a router or switch, go to https://192.168.13.31:9443 or http://192.168.13.31:9191. Log in to the modem with the following login information.
How do I access ACEmanager?
Launch an internet browser and type 192.168. 13.31:9191 into the search bar and hit enter. The ACEmanager login should appear if the connection was successful. Internet Explorer, Firefox, and Chrome are all compatible.
What is Ace Manager?
ACEManager is a configuration and diagnostic tool for the Sierra Wireless AirLink Raven modems.
What is the firmware version of Airlink RV50?
As of this writing, the current version is RV50 ALEOS 4.9.0. If the firmware on your AirLink RV50 is not the latest version, download the newest firmware.
What is the purpose of Airlink RV50?
In such a setup, the purpose of AirLink RV50 is to send and receive SMS messages. Essentially, it is going to be utilized as an SMS gateway. Ignition picks up information from a PLC that the water temperature is too hot. Ignition sends an SMS message via AirLink RV50 to contacts assigned to that alarm.
How to check if Airlink RV50 is receiving text messages?
Then, go to the ACEmanager, switch to the Services tab, SMS section, and check the Last Incoming Phone Number and Last Incoming Message field. You should see the sender’s number and the message sent. Press Refresh if you do not see them immediately.
How to SSH into a router?
To SSH into the router from systems that do not have built-in SSH functionality (for example, from Windows systems), use PuTTY or some other SSH Client. See Ethernet section for IP and login credentials.
What is Airlink's sole purpose?
In the tested configuration, AirLink’s sole purpose is to handle SMS traffic.
What is port filtering on Airlink RV50?
Port filtering is used to prevent outbound HTTP and HTTPS traffic over the air from the Airlink RV50.
What browser to use to change modem configuration?
To access the modem’s configuration information and be able to change it, you will be accessing what is called the ACEmanager, which can be accessed via Ethernet, USB or Serial connection. This document will only cover Ethernet access. The recommended browser to use is IE or Firefox; using the Chrome browser has been known to result in unexpected behavior.
