To fix VPN error The Remote Access Service IP configuration is unusable, do the following:
- Open Device Manager: Click Start , type device manager and click Device Manager (Control Panel)
- Expand Network Adapters
- Right-click on WAN Miniport (IP) and click Uninstall Device
- Right-click on WAN Miniport (PPTP) and click Uninstall Device
- Right-click on WAN Miniport (IPv6) and click Uninstall Device
- Click Action and click Scan for hardware changes
Full Answer
Do I need remote access connection manager service?
You may require this service for some direct cable or DSL providers and connections, depending on how they implement their logon process. If your dial-up, cable or DSL internet access no longer functions properly with this service disabled, place this service into Automatic. If you use a hardware gateway or router, this service is not required.
How to configure a remote access server?
Configure Routing and Remote Access. Open Server Manager and click Tools on the top toolbar. From the drop-down list, select Remote Access Management. In the open Routing and Remote Access window, right click on your server name just below Server status, then select Configure and Enable Routing and Remote Access from the drop-down menu.
How do I configure Windows Home Server for remote access?
Turn on and configure Remote Web Access
- Remote Web Access overview. When you are away from your office, you can open a web browser and access Remote Web Access from anywhere that has Internet access.
- Turn on Remote Web Access. ...
- Change your region. ...
- Manage Remote Web Access permissions. ...
- Secure Remote Web Access. ...
- Manage Remote Web Access and VPN users. ...
Could not locate remote server?
240023 Error Code(s) 240023 This error code displays the following message: Could not locate remote server
How to start remote access?
Select Start service to start Remote Access. In the Remote Access MMC, right-click the VPN server, then select Properties. In Properties, select the Security tab and do: a. Select Authentication provider and select RADIUS Authentication.
How to install Remote Access Role in VPN?
On the VPN server, in Server Manager, select Manage and select Add Roles and Features. The Add Roles and Features Wizard opens. On the Before you begin page, select Next.
How to select a server from the server pool?
On the Select destination server page, select the Select a server from the server pool option. Under Server Pool, select the local computer and select Next. On the Select server roles page, in Roles, select Remote Access, then Next. On the Select features page, select Next. On the Remote Access page, select Next.
Can you assign a VPN to a pool?
Additionally, configure the server to assign addresses to VPN clients from a static address pool. You can feasibly assign addresses from either a pool or a DHCP server; however, using a DHCP server adds complexity to the design and delivers minimal benefits.
Is RRAS a router or a server?
RRAS is designed to perform well as both a router and a remote access server because it supports a wide array of features. For the purposes of this deployment, you require only a small subset of these features: support for IKEv2 VPN connections and LAN routing.
Where to install a server?
Install the server on your perimeter network between your edge and internal firewalls, with one network adapter connected to the External Perimeter Network, and one network adapter connected to the Internal Perimeter Network.
Can you use a VPN as a RADIUS client?
When you configure the NPS Server on your Organization/Corporate network, you will add this VPN Server as a RADIUS Client. During that configuration, you will use this same shared secret so that the NPS and VPN Servers can communicate. In Add RADIUS Server, review the default settings for: Time-out.
Description
When connecting to an appliance using an SSLVPN tunnel, through Net Extender on a Windows Machine you receive the following error:
Cause
This issue seems to occur when the WAN Miniport (IP and PPTP) network devices are deleted, corrupted, or otherwise broken on the End Device.
Resolution
Make Sure the PC has an Internet connection and Windows Server is up to date. Update the PC in case of any pending updates.
What is the error code for Windows 2000?
Error codes with numbers higher than 900 will only be seen if you are trying to connect to a Routing and Remote Access Server that is running Windows 2000 or later.
Can a server allocate NetBIOS resources?
The server cannot allocate NetBIOS resources needed to support the client.