May I know the hardware and firmware versions of your Archer C9? You can find the remote management feature via Advanced -> Security -> Remote Management, or via Advanced -> System Tools -> Administration -> Remote Management #2
Full Answer
What do you need to know about Archer C9?
Archer C9 supports IPv6, which is the foundation of the next generation of the Internet and enables a range of new services and improved user experience. 4 Chapter 1 Get to Know About Your Router Tether APP TP-LINK Tether provides the easiest way to access and manage your router with your devices.
How do I configure remote management for my TP-Link wireless router?
How do I configure Remote Management for my TP-Link Wireless Router? Open the web browser and in the address bar type in: Then press Enter. The LAN IP is vary by model. Please find it on the bottom label of the product. Type the username and password in the login page. They are both admin by default.
What is the function of forwarding in TP-Link router?
With forwarding feature the router can penetrate the isolation of NAT and allows the external hosts in the Internet to initiatively communicate with the devices in the local network, thus to realize some special functions. TP-LINK router includes four forwarding rules.
How do I access my tp-link router remotely?
To access the Router, you should enter your Router's WAN IP address into your browser's address (in IE) or location (in Netscape) box and the custom port number. For example, if your Router's WAN address is 202.96. 12.8 and you use port number 8080, enter http://202.96.12.8:8080 in your browser.
How do I access Tplink Archer C9?
Type 192.168. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your TP-Link Archer C9 is admin.
How can I control my router remotely?
Configure Router Remote Management SettingsLog in to your router's admin console. ... Click TOOLS tab, then go to the ADMINISTRATION section.Uncheck Enable Remote Management.Remove the Remote Admin Port from the textbox.Click Save Settings.Put a check beside Enable Remote Management.More items...•
Can I access my router settings remotely?
When you want to access your router from inside the network; all you have to do is type in the router's IP address in the web browser. Similarly, to access your router from outside, you need to type in your public IP address followed by remote control port no i.e. 8080.
What is the 192.168 0.1 password?
The default IP address is 192.168. 0.1. At the login, enter the username (admin) and your password (default password is nothing). Note: If you have forgotten this password, you will have no choice but to reset the router to factory defaults.
How do I access my router from my phone?
You can also access the router's settings on your phone from a mobile web browser:Make sure your phone is connected to your router's wireless network.Identify your router's default gateway IP address. ... Find your router's user name and password. ... Open a mobile browser and enter the router's IP address in the URL bar.More items...•
How do I access my home network remotely?
When you're away from home, you can just point a browser to myhome.homefpt.net:8080 to access your router's Web interface and manage your home network remotely. This works with almost all home routers, except for those from Apple.
How do I get to my router admin page?
How to Access a Router as an AdministratorIdentify the IP address of the router. Most routers are manufactured to use a default address such as 192.168. 0.1, 192.168. 1.1, 192.168. 2.1, or 192.168. 1.100. ... Enter the administrative login information—username and password—to authenticate and access the admin settings.
How do I find my tp-link username and password?
What if I forget the password of my TP-Link ID or the account is...Step 1: On the Login page, click on Forgot Password.Step 2: Enter your TP-LINK ID username (E-mail address), click on Send.Step 3: Go to your E-mail Inbox, refer to the instruction to reset your password.
How do I reset my C9 Archer router?
To reset the TP-LINK Archer C9 to its default settings, you have to do the following steps:Switch on router.Press Reset/WPS button and hold for at least 6 seconds.Device is automatically restarted.Default settings have been restored.
How do I update my C9 Archer firmware?
Click on System Tools-Firmware Upgrade; you can click Check for upgrade to find whether you have the new firmware or not. Or you can click on Browse to find the extracted firmware. Note: Configuration might be a bit different for some older firmware, like the earlier firmware of Archer C9, C8 etc.
What is the default WIFI password for TP-Link Router?
The default IP address is 192.168. 0.1(or http://tplinkwifi.net ), and the default login username and password both are admin (all lower case).
How to block a computer from accessing my TP link router?
1. Log in the router’s management interface. If you don’t know how to do that, please refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? 2. Go to Security > Local Management, and you can block computers in LAN from accessing the router.
How to manage router remotely?
Remote Management. 1. Log in the router’s management interface. If you don’t know how to do that, please refer to How to log in to the web-based interface of Wi-Fi Routers (new logo)? 2. Go to Security > Remote Management, and you can manage your router from a remote device via the internet. • Web Management Port - Web browser access normally uses ...
How to access router?
To access the Router, you should enter your Router's WAN IP address into your browser's address (in IE) or location (in Netscape) box and the custom port number. For example, if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter http://202.96.12.8:8080 in your browser. You will be asked for the Router's password.
What does it mean to type a specific public IP address for remote management?
Type a specific Public IP address for the Remote Management IP Address means that you can only connect to this device remotely from a computer which is using this specific IP address.
Where is the LAN IP?
The LAN IP is vary by model. Please find it on the bottom label of the product.
How to log into TP link router?
If you don’t know how to do that, please refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? 2. Go to Advanced > System Tools > Administration and complete the settings in Remote Management section as needed.
How to remotely manage a router?
Allow specific devices to manage the router remotely: 1 Select Enable Remote Management for Specified Devices. 2 Enter Web Management Port (1024-65535 or 80). 3 In Remote Management IP address, enter the IP address of the remote device to manage the router. 4 Click Save.
What is Archer C9 AC1900?
The Archer C9 AC1900 Wireless Dual Band Gigabit Router provides flexible access control, so that parents or network administrators can establish restricted access policies for children or staff. It also supports Virtual Server and DMZ host for Port Triggering, and then the network administrators can manage and monitor the network in real time with the remote management function.
What browsers can I use to configure Rouer?
The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
What does AC1900 router mean?
router Stands for AC1900 Wireless Dual Band Gigabit Router without any explanation. parameters Parameters provided in the screenshots are just references for setting up the device, which may differ from the actual situation. You can set the parameters according to your demand. screenshotsyour device due to the various firmware versions. Please just configure your product
How to get WPS on router?
1 ) Tab the WPS icon on the device’s screen. 2 ) Immediately press the WPS button on your router.
How to connect a router to a DSL modem?
If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s Internet port, then follow steps 5 and 6 to complete the hardware connection.
How to turn on wireless on router?
WiFi Button Press the WiFi button for about 2 seconds to turn on or off the wireless function of your router. USB 3.0 Port For connecting to a 3.0 USB storage device or a 3.0 USB printer. It is also compatible with USB 2.0 devices.
Where are the LEDs on my router?
The router’s LEDs (view from left to right) are located on the front. You can check the router’s working status by following the LED Explanation table. LED Explanation
How to connect Archer C8 to USB?
Step 1. Plug a USB Storage device into the USB port ,make sure the USB light lit up on the router. Step 2. Access the web interface of Ar cher C8 as an example . Please click here to access the web interface. Step 3. Click Advanced on the top, then click USB Settings -> Device Settings on the left side menu.
What is the file sharing feature on Archer C8?
Archer C8 ( V1 V2 ) , Archer C9 ( V1 ) , Archer C5 ( V2 ) The File sharing feature allows you to share a USB storage device that’s connected to the router, (USB Drive or mobile Hard Disk Drive) to other wired or wireless users on the same network.
How to check if Archer C8 is plugged in?
Click Advanced on the top, then click USB Settings -> Device Settings on the left side menu. Check whether the USB device is identified by Archer C8.If there is no device listed on this page, please click Scan and you may try unplug the USB device and plug it back in.
