To enable remote access on a software install:
- Log into your local UniFi Network application as usual.
- Navigate to System Settings > Administration.
- Turn the Enable Remote Access feature ON.
- Enter your Ubiquiti account credentials to Remote Access Portal credentials on the login request and select Enable Remote Access. ...
Full Answer
Why can't I connect to Unifi remotely?
There is a third-party firewall, gateway, or ISP modem blocking remote access traffic. Refer to UniFi - Ports Used to ensure all necessary ports are enabled. You may need to contact your ISP to assist with this configuration.
How do I set up my controller to run unifi cloud?
You do not need to open ports or do anything with your router. Once it's set there, log in to unifi.ubnt.com and make sure that your Controller entry is set to "Launch using Cloud" rather than Hostname or IP of Your Controller. I have eight Controllers in my unifi.ubnt.com account and it works perfectly.
What is Unifi access?
Access, oversee and control your UniFi devices remotely. Anywhere. Anytime. It’s time to leave the on-site controller behind. Manage all of your locations in tandem with UbiCloud. All plans include nightly off-site backups to two locations which are securely stored on DigitalOcean & AWS.
How do I add a new device to my unifi account?
This article describes how to add, configure, and gather information from a new UA-Hub or access reader device (UA-Pro/UA-Lite) using your UniFi Access application. Navigate to the Devices section and click Add Devices. Select the device (s) you would like to add. If your devices are wired correctly and powered on, you should see them on this page.
How to add devices to UniFi?
How to update all devices at once?
How to reset a device in Access?
About this website
How can I control my ubiquiti access point remotely?
0:363:57Managing Unifi client sites remotely with unifi controller | MSP - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe need to do a set in form to the the public IP address of where that's hosted. In then we'll adoptMoreWe need to do a set in form to the the public IP address of where that's hosted. In then we'll adopt it to the other site so I will be right back.
How do I access UniFi controller via cloud?
0:485:43How To Connect A Local Unifi Controller To Ubiquiti's Cloud PortalYouTubeStart of suggested clipEnd of suggested clipSo to get started to link the two up let's go down to the lower left hand corner and click on theMoreSo to get started to link the two up let's go down to the lower left hand corner and click on the Settings icon. And.
Does Ubiquiti have an API?
This tool is for browsing data that is exposed through Ubiquiti's UniFi Controller API, written in PHP, JavaScript and the Bootstrap CSS framework. It comes bundled with a PHP class for access to the UniFi Controller API, which supports more API endpoints than the UniFi API browser tool does.
Is Ubiquiti Network controller free?
With UniFi, you use the UniFi Network application. This is free software that can run on Windows, macOS or Linux. You can run the software on any PC you have, on a physical server, or in a VM or Docker container.
How do I find my UniFi controller IP?
How to:Launch your remote site that you require the public IP address.Once connected to CK press Cntrl+Shift+I this will open developer tools within Chrome.Click on Console within the developer tools window.Press Cntrl+F and type googremoteaddress.
How does the UniFi Cloud Key work?
Easily accessible through any standard web browser, the UniFi Cloud Key is a powerful solution for managing your UniFi networks across the campus or across the globe. Designed for convenient management, the UniFi Controller software allows admins to configure and monitor UniFi devices using a graphical user interface.
Is there a monthly fee for Ubiquiti?
Ubiquiti does not charge software licensing or maintenance fees.
How do I access UniFi AP without a controller?
Installing without the ControllerSo first we need the Unifi App from the Google Play store (or IOS app store), download the app on your mobile phone.Next, we need to install the Unifi AP, make sure it's connected with an ethernet cable to your network. ... Start the app on your mobile devices.More items...•
Can I use Ubiquiti access point without controller?
UniFi APs can run by themselves without the controller unless features like guest portal is enabled (as UniFi controller also functions as a captive portal). Restarting the controller won't restart your APs.
How do I access the UniFi controller web interface?
Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.
Does UniFi have a cloud controller?
UniFi- a Cloud-hosted controller that for $199/yr can manage up to 100 devices with no device subscriptions required. This cloud controller joins UnIFi Elite and the UniFi Cloud key as an additional option for UniFi administrators.
How do I access the UniFi dashboard?
UniFi Network web applicationEnter the console's IP address into your web browser. This address is displayed on the console's LCM screen (for most users, it is 192.168. 1.1).Sign in with your Ubiquiti SSO credentials, locate your console on the dashboard, and click the Network icon.
How do I get to the UniFi dashboard?
1:047:25New UniFi Dashboard, who this? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you go on over to settings. And you go to user interface now you've got to be on a udm udm pro.MoreIf you go on over to settings. And you go to user interface now you've got to be on a udm udm pro.
Forgot AP now "Managed by Other" - Where did I go wrong?
Below is info that may be useful to help. The setup is a UDM, 16port switch, and a UAP-AC-LR. There are 3 vlans. The main lan, and two guest wifis networks vlan together.
How to manually set the controller address for a Unifi AP
My need for this arose when I copied my config from my local Unifi controller to a new one on a VM in a different subnet. The problem I ran into was that DNS for the subnet where the APs were isn't setup to use our internal DNS servers so it wasn't seeing the "unifi" host in my DNS.
How to add devices to UniFi?
To add the UniFi Access devices to your Access application: Navigate to the Elements tab and click Add Elements to add new devices. Select the device (s) you would like to add. If your devices are wired correctly and powered on, you should see them on this page. Note: Different devices have different indicators of being ready for setup: ...
How to update all devices at once?
Update your devices: If you'd like to update all your devices at once, click the update icon right by the "Firmware" column title. If you'd like to update the devices one by one, click the update icon right next to the specific device's firmware version.
How to reset a device in Access?
Go to the Elements section and select the device. On its Properties panel, select the Manage tab. Click Reboot device to reboot the device. Click Forget device to reset a device back to the default settings and delete it from the Access application.
How to add devices to UniFi?
To add the UniFi Access devices to your Access application: Navigate to the Elements tab and click Add Elements to add new devices. Select the device (s) you would like to add. If your devices are wired correctly and powered on, you should see them on this page. Note: Different devices have different indicators of being ready for setup: ...
How to update all devices at once?
Update your devices: If you'd like to update all your devices at once, click the update icon right by the "Firmware" column title. If you'd like to update the devices one by one, click the update icon right next to the specific device's firmware version.
How to reset a device in Access?
Go to the Elements section and select the device. On its Properties panel, select the Manage tab. Click Reboot device to reboot the device. Click Forget device to reset a device back to the default settings and delete it from the Access application.
