How do I access my UNV NVR?
Step 1. First of all, try to access your UNV NVR by using the default username and password. You never know, maybe your recorder is still using the default password. Use the following details to log in to the NVR
What should I do if the date on my NVR is different?
Inform technical support of both your Serial Number and the date on your NVR if it is different from today’s date.
How do I retrieve my Password from my NVR?
Once logged in, you should see your NVR listed under “My Cloud Devices”. Click “ Retrieve ”. On the password retrieve screen, verify that the “ Valid Date ” is the same date as you recorded from your NVR. If it is different, change the date to match the date from your NVR.
How do I view UNV NVR remotely?
How To View A Uniview NVR Via EZView AppWe will be going through this process via the web interface on internet explorer from a local PC. ... First, open the app, then click the 3 Horizontal Line icon in the top left corner.Click on Devices.Select Add.Choose Scan.Then Scan the QR Code from the web interface of the NVR.More items...
How do I access Uniview remotely?
1:212:35Set up EZView app for Uniview remote view - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing would be you'll need to enter your email address. And then you'll need to click onMoreThe first thing would be you'll need to enter your email address. And then you'll need to click on to verify. And after that you receive an email with a verification code number.
How do I access my NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
How do I access Uniview NVR?
Clicking on the Remote Web button will open your default browser and take you to the NVR interface. You can then proceed to login to your Uniview NVR Interface. Since this is the first time, we will be using the default username and password found on the manual that came with the NVR.
How can I access my IP camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
What is EZView?
EZView is a mobile surveillance app. With this app you can access Uniview surveillance products through network and view live or recorded video, receive alarms and manage cloud devices using your mobile phone.
How can I access NVR from mobile?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How can I access my DVR from outside network?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How do I find my NVR IP address?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
What is the default IP address of UNV NVR?
The default static IP address of the camera is 192.168. 1.13, and the default subnet mask is 255.255. 255.0.
What is Uniview default password?
123456Use the default username admin and password 123456 for your first login. CAUTION! The default password is intended only for the first login and should be changed to a strong one containing at least eight characters including uppercase and lowercase letters, digits and symbols after your first login to ensure security.
How do I connect to an UNV IP camera?
Unv IP camera URL The settings for Unv cameras are built right into our free surveillance software - click "Add" then "IP camera with wizard" to automatically setup your Unv cameras. Remember to also try connecting via ONVIF as Unv cameras may support ONVIF connections as well.
How do I set up Ezview app?
1:163:27Uniview Series: EZView App Quick Setup Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis will prompt up your side menu in which we're going to select devices. Within the devicesMoreThis will prompt up your side menu in which we're going to select devices. Within the devices section select the plus sign located in the top right corner of the application.
How do you use Ezstation?
0:052:02How to use playback with Uniview's EZ Station video management ...YouTubeStart of suggested clipEnd of suggested clipGo to the download button located at the bottom right of the screen just above the slider. And clickMoreGo to the download button located at the bottom right of the screen just above the slider. And click on it once you hit the download. Button it will bring up a display.
Why is Ezview offline?
This indicates that there's a network connection issue and the NVR cannot connect to the internet. First, make sure that the recorder is connected properly to the network. It should be wired directly from the LAN port at the back of the NVR to your router or network switch.
Why does my Ezviz say offline?
1. If the camera is connected by W-Fi, please make sure the devices is not too far away from router so that device can receive stronger network signal. 2. You can check the signal condition from the Offline Help on each device card when device goes offline.
How to add NVR to my phone?
Add the NVR. First, open the app, then click the 3 Horizontal Line icon in the top left corner. Then you will see a Device list With your NVR, Click on it for a Pop up to appear, and select " Start Live View ". Then You will have a Live View of any cameras connected to the NVR!
How to connect NVR to EZCloud?
Step 1. Connect The NVR To Your Network. First, you will need to connect the NVR to your network. Taking a cat5e/cat6 cable from the LAN port on the NVR, then the other end will go to your router or network switch. Step 2. Log Into The NVR and Enable EZCloud.
How to use NVR?
An NVR supports two types of operations: local operations and web- based remote operations. With local operations you connect a monitor and a mouse to the NVR and use the mouse to operate. If your NVR has buttons on the front panel or is delivered with a remote control, you may also control your NVR by pressing the front panel buttons or using the remote control. The NVR has an embedded web server and allows web-based operations. To do this, you need a PC that has a network connection to the NVR and is installed with a web browser. You just need to navigate to the NVR's IP address and log in to the Web interface like you log in to the system locally. This section describes local operations.
How to shut down NVR?
Power Press this button to start up or shut down the NVR. To shut down, press this button and hold for at least 3 seconds till a message appears on your monitor. Click Yes.
How to access Uniview camera?
To access the Uniview recorder or IP camera via the web browser, you need to use a Windows computer/laptop and the Internet Explorer. It won’t work on other browsers (Mozilla, Chrome) and in Mac machines. Note: if you can’t find the IP address of your recorder, simply go to the Network Settings of the recorder and locate the IP address on ...
What is Uniview 2021?
February 7, 2021. in Uniview. Uniview is a popular CCTV manufacturer that is often sold under other brand names. They manufacture recorders (DVR, NVR) and IP cameras. All these units can be accessed locally (directly using the DVR/NVR) or via a computer. Sometimes when accessing via a browser you may not see the cameras live.
How to find IP address of a recorder?
Note: if you can’t find the IP address of your recorder, simply go to the Network Settings of the recorder and locate the IP address on the interface. Additionally, you can scan the network via your laptop using the EZtools.
How to find serial number on NVR?
Before contacting technical support, record the Serial Number of the NVR. This can be found with the EZTools software, or on a sticker on the bottom of the NVR. Serial Numbers are designated with “SN:” before them on the sticker. They should be 20 digits in length, and begin with “210”.
How long is a NVR password valid?
Note: The password generated is only valid for one day. Change the password on the admin account once you have successfully logged in to the NVR.
What to do if EZCloud account is not connected?
Once logged in, you should see your NVR listed under “My Cloud Devices”. Click “ Retrieve ”.
Can you use a password to access Uniview NVR?
After you generate a master password (which is temporary), you can use that password to access your Uniview NVR and eventually modify your old forgotten password.
