windows server 2008 remote access setup

Configuring Windows Server 2008 as a Remote Access SSL VPN Server (Part 2)

• Install IIS on the VPN Server. This might sound like a strange way to get things started, as I normally suggest that you...
• Request a Machine Certificate for the VPN Server using the IIS Certificate Request Wizard. The next step is to request a...
• Install the RRAS Server Role on the VPN Server. In...

Full Answer

How do I set up remote desktop on Windows Server 2008 R2?

On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. The Server Manager dialog box appears. Click Roles, and then click Add Roles. The Select Server Roles page of the Add Roles Wizard appears. Select Remote Desktop Services, and then click Next.

How do I install the remote access role?

You must install the Remote Access role on a server in your organization that will act as the Remote Access server. On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.

How do I enable routing and remote access in Windows Server 2003?

Installing the Routing and Remote Access Service By default, the Routing and Remote Access service is installed automatically during the Windows Server 2003 installation, but it is disabled. To Enable the Routing and Remote Access Service Click Start, point to Administrative Tools, and then click Routing and Remote Access.

How do I set up Terminal Services in Windows Server 2008?

Log on to your Windows Server 2008 computer as an administrator. Click Start, and then click Server Manager. Right-click Roles, and then click Add Roles. The Add Roles Wizard appears. On the Before You Begin page, click Next. On the Select Server Roles page, select Terminal Services.

How do I setup Windows server for Remote Access?

Steps How to Windows Server Enable Remote Desktop (RDP)Launch the Start menu and open Server Manager. ... Click on the Local Server on the left hand side of the Server Manager window. ... Select the Disabled text. ... Click on Allow remote desktop connections to this Computer on the System Properties window.More items...•

How do I give someone access to my server via RDP?

Manually grant RDP access to an Active Directory userLog in to the server.Right-click the Windows® icon and select System.Select the remote settings depending on your Windows version: ... Click on Select Users.Click Add.Type the username you wish to add.Click Check Names. ... After you add the user, click Apply and OK.

How do I enable Remote Access?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

Does Windows Server 2008 have Active Directory?

The directory service in Windows Server 2008 and later is called Active Directory Domain Services (ADDS). Reboot the server. Once Active Directory Domain Service is successfully installed, you should see it under Roles in the Server Manager console.

How do I set RDP permissions?

In the Connections folder, right-click RDP-Tcp. Select Properties. On the Permissions tab, select Add, and then add the wanted users and groups.

How do I know if my Windows Server is RDP enabled?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services.If the value of the fDenyTSConnections key is 0, then RDP is enabled.If the value of the fDenyTSConnections key is 1, then RDP is disabled.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

Why is my remote access not working?

Check firewalls, security certificates and more if a remote desktop is not working. When the remote desktop connection between a Windows desktop and its host fails, it's time to do some remote desktop troubleshooting by checking firewalls, security certificates and more.

How do I remotely connect to another computer?

Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.

How do I setup Windows Server 2008 R2?

How to setup and configure a Domain Controller on Windows Server 2008 R2Log into your Windows Server and start the Server manager.Navigate to the Server Roles tab and press on the “Add Roles” button.The Add Roles Wizard is going to open up, click Next.The Wizard will display a list of Roles.More items...

How do I install Active Directory?

Use these steps to install it.Right-click the Start button and choose “Settings” > “Apps” > “Manage optional features” > “Add feature“.Select “RSAT: Active Directory Domain Services and Lightweight Directory Tools“.Select “Install“, then wait while Windows installs the feature.

What is the use of DCPromo?

DCPromo (Domain Controller Promoter) is a tool in Active Directory that installs and removes Active Directory Domain Services and promotes domain controllers. DCPromo, which builds forests and domains in Active Directory, is found in every version of Windows Server since Windows 2000.

How do I give users access to my server?

ProcedureLog in to Microsoft Windows Server as an administrator.Create a group. Click Start > Control Panel > Administrative Tools > Active Directory and Computers. ... Configure the server to allow local users and the DataStage group to log in. ... Add users to the group. ... Set permissions for the following folders:

How do I give RDP to a user in Windows Server 2019?

Allowing Remote Desktop Service from Server Manager GUI Open Server Manager from the Start menu. Click on the “Local server” on the left section. Click on the “Remote Desktop” disable button. Agree to Remote Desktop firewall exception warning and add users to allow by clicking on “Select Users“.

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.

How to connect to a remote system?

You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.

How to remotely connect to a computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...

How to install IIS Web Server 2008?

Perform the following steps on the VPN server to install the IIS Web server role: Open the Windows 2008 Server Manager. In the left pane of the console, click the Roles node. Figure 1. Click the Add Roles link on the right side of the right pane. Click Next on the Before You Begin page.

How to add a role in a server?

In the Server Manager, click the Roles node in the left pane of the console. In the Roles Summary section, click the Add Roles link. Click Next on the Before You Begin page. On the Select Server Roles page, put a checkmark in the Network Policy and Access Services checkbox.

How to access CRL distribution points?

Click the Details tab of the certificate and scroll down to the CRL Distribution Points entry and click on that entry. In the lower pane you will see the various distribution points based on the protocol used to access those points. In the certificate seen in the figure below, you can see that we need to allow the SSL VPN client access to the CRL via the URL:

How do you know what URL the SSL VPN client needs to connect to in order to download the CRL?

How do you know what URL the SSL VPN client needs to connect to in order to download the CRL? That information is contained within certificate itself. If you go to the VPN server again and double click on the certificate in the IIS console, as you did earlier, you will be able to find this information.

Can you authenticate using a domain?

Since the VPN server is a member of the domain, you can authenticate users using domain accounts. If the VPN server were not a member of the domain, then only local accounts on the VPN server could be used, unless you decide to use the NPS server. I'll do an article on how to use an NPS server in the future.

How to install Remote Desktop Services?

To install the Remote Desktop Services, click on the Start menu and then click Server Manager. Right click on Roles and then Add Roles. Select the Remote Desktop Services and click Next.

What is RDS in Windows 2008 R2?

With Windows 2008 R2 there is a common service used in the daily management of network: Terminal Services , aka Remote Desktop Service (RDS) in Windows 2008 R2. The Remote Desktop Connection is another tool that we use every day to manage our network remotely. Now with RDS is also possible to use a type of application virtualization called RemoteApp. With it the application’s installation is done on the server and all its services, file, registry and hardware are used on the server itself. Users connect remotely to the application using Remote Desktop Protocol with a real experience of the application running locally. This scenario is very interesting for applications that require enhanced hardware for centralized management and rapid provisioning and efficient.

What is RD user group?

already added by default. The RD Users group makes reference to all users who will use the RemoteApp. Click Add, select the desired groups and click Next.

Can you connect to a remote server with a version 6?

For clients running Remote Desktop Connection Client version 6 and above you can create a connection to the server securely, protecting it against unauthorized access. Therefore, before connecting to the server the user must specify the username and password and then have the connection made.

How to access remote access server?

On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

Where is the Configure button in Remote Access Management Console?

In the middle pane of the Remote Access Management console, in the Step 3 Infrastructure Servers area, click Configure.

How to deploy DirectAccess for remote management only?

In the DirectAccess Client Setup Wizard, on the Deployment Scenario page , click Deploy DirectAccess for remote management only, and then click Next.

How to add roles and features to DirectAccess?

On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.

How to install Remote Access on DirectAccess?

On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

How to add domain suffix in remote access?

On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.

How to enable remote access to a server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.

How to reconfigure a server?

To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

Can you grant callbacks in Windows 2003?

Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.