windows xp remote access

To enable Remote Desktop, follow these steps:

• Log on to your Windows XP Professional–based computer using an Administrator account.
• Click Start, right-click My Computer, and then click Properties.
• In the System Properties sheet, click the Remote tab.
• Select the Allow users to connect remotely to this computer check box. Note You must be logged on as an Administrator...

Full Answer

How do I setup my computer for remote access?

To enable remote connections on Windows 10, use these steps:

• Open Control Panel.
• Click on System and Security.
• Under the “System” section, click the Allow remote access option ...
• Click the Remote tab.
• Under the “Remote Desktop” section, check the Allow remote connections to this computer option.

How do I enable remote desktop in Windows XP?

How do I enable remote access on Windows XP? How do I enable Remote Desktop in Windows XP? Right-click My Computer, and select Properties. Select the Remote tab. Select “Allow users to connect remotely to this computer.” Click “Select Remote Users” if you want to add a non-Administrator user. Click Add. Select the users, and click OK.

How to setup remote desktop on Windows XP?

• Insert the Windows XP Professional operating system CD into your CD-ROM drive
• From the Setup menu click Perform Additional Tasks, and then click Set up Remote Desktop Connection
• In the Remote Desktop Connection-InstallShield Wizard, follow instructions until installation is complete

How do I configure Windows Home Server for remote access?

Turn on and configure Remote Web Access

• Remote Web Access overview. When you are away from your office, you can open a web browser and access Remote Web Access from anywhere that has Internet access.
• Turn on Remote Web Access. ...
• Change your region. ...
• Manage Remote Web Access permissions. ...
• Secure Remote Web Access. ...
• Manage Remote Web Access and VPN users. ...

Can Windows 10 RDP to Windows XP?

Yes Remote Desktop connection in Windows 10 will work to connect to Windows XP if and only if it is of professional edition.

How do I use Remote Assistance in Windows XP?

1:526:14Windows XP - Remote Assistance - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing several different methods go to the start menu and select help and support under ask forMoreUsing several different methods go to the start menu and select help and support under ask for assistance section we can invite a friend to connect to our computer with remote.

Does LogMeIn work on Windows XP?

Remember, LogMeIn Pro runs fine on XP but the new installer does not.

How can I access my computer remotely?

Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.

How do I set up remote assistance on Windows?

In the search box on the taskbar, type remote assistance, and then select Allow Remote Assistance invitations to be sent from this computer from the list of results. Then, on the Remote tab, select the Allow Remote Assistance connections to this computer check box, and then select OK.

How does remote assist work?

Remote assistance refers to a connection that is intended to provide technical support from a distance. In this mode, a user who is sitting at his or her computer can invite a technician to see what is happening on the screen remotely.

How can I remotely access my computer for free?

10 Best Free Remote Desktop Tools You Should KnowTeamViewer. Available in premium and free versions, TeamViewer is quite an impressive online collaboration tool used for virtual meetings and sharing presentations. ... Splashtop. ... Chrome Remote Desktop. ... Microsoft Remote Desktop. ... TightVNC. ... Mikogo. ... LogMeIn. ... pcAnywhere.More items...

How can I remotely access another computer using IP address?

Once you've set up the target PC to allow access and have the IP address, you can move to the remote computer. On it, open the Start Menu, start typing “Remote Desktop” and select Remote Desktop Connection when it appears in the search results. Then in the box that appears type the IP address and click Connect.

How do I enable remote access?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

Can someone remotely access my computer when it's off?

Without appropriate security software installed, such as anti-malware tools like Auslogics Anti-Malware, it is possible for hackers to access the computer remotely even if it is turned off.

Can I access my PC from my phone?

Google has made it possible to access your Windows desktop or your Mac from your phone, be that an Android phone or an iPhone. And it doesn't have to be iPhone for macOS, you can mix and match – all you need is the Chrome Remote Desktop app running on both devices.

Does Remote Desktop work from anywhere?

Once the remote agent is implemented, you can work on and connect with your PC from anywhere and at any time. For companies using unattended remote access software to provide support, unattended remote access allows them to deliver intermittent support services and perform maintenance activities on devices.

How to connect to a remote desktop?

Go to Start, Control Panel, and click on System. Click on the Remote tab and make sure that the “Allows users to connect remotely to this computer” box is checked. Don’t worry about clicking the Select Remote Users button because Administrators have access by default. If you want to give an non-administrator account remote desktop access, then click that button and add the user.

How to connect to XP from another computer?

In order to connect, go to the other computer and click on Start, All programs, Accessories, Communications, and Remote Desktop Connection. If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start ...

How to connect to XP from Windows 7?

If you want to connect to the XP machine from Windows Vista, Windows 7 or Windows 8, just click on Start and perform a search for remote desktop connection. On Windows 8, go to the Start Screen and start typing to perform a search. In the dialog box, you can type in the IP address or the name of the computer. ...

How to connect to a computer with an IP address?

In order to get the IP address of the computer you want to connect to, go to the computer and click on Start, Run and type in CMD. In the black command window, type in the word “ ipconfig ” without the quotes as shown below and press Enter.

What port does remote desktop use?

Be default, remote desktop uses port 3389, so type that into both the internal and export port boxes. Lastly, the internal IP address should be the IP address of the XP machine. On some setups, you’ll be asked for a starting port, ending port and triggering port. Just put 3389 for any port boxes.

How to find the IP address of my router?

You’ll need to log into your router by typing it’s IP address into the browser address bar. You can figure out the IP address of your router by going to any computer on your network (that you want to connect into) and opening the command prompt like we did above and typing ipconfig again. In addition to the IP Address field, you’ll also see Default Gateway, this is your router. From the above screenshot, you can see mine is 192.168.244.2.

How to get a public IP address?

First, you have to get your public IP Address (not the 192.168.x.x number) and you can do this by going to the computer you want to connect into and navigating to the web site http://www.whatismyip.com/ and this will give you your public IP address. This is the address that can be used from anywhere in the world to connect to your specific location and is unique. Unfortunately, on most home connections, this public IP address changes often and without notice. Basically to solve that problem, you have to use dynamic DNS. I won’t go into much detail in this post, but read my other posts on how to configure it:

What is remote desktop in Windows XP?

Microsoft Windows XP's Remote Desktop application biggest benefit is that it provides access to a desktop as if you were sitting in front of the system. Follow these steps to configure Windows Remote Desktop and administer systems remotely.

How to enable remote desktop access?

To ensure a remote system is configured to support Remote Desktop, follow these steps: Click Start. Click Control Panel. Select Performance and Maintenance and click System (if the view is set to Category; if the Classic View is in use simply click the Control Panel’s System applet).

What operating system is used to host a remote desktop?

The local system (the PC connecting to the remote desktop that will serve as the host) must be running Windows XP Professional (or a Windows 2003-flavor server) or have the appropriate Terminal Services tools installed.

How to open remote desktop?

The older Windows system can now open the Remote Desktop Connection menu by clicking Start | Programs | Accessories | Communications | Remote Desktop Connection or by opening a command prompt and typing mstsc.

How to access Windows firewall?

Access the Windows Firewall menu (by clicking Windows Firewall using Control Panel’s Category View or by clicking Security Center and selecting Windows Firewall using the Classic Vew).

Where to insert Windows XP Professional CD?

Insert a Windows XP Professional CD in the local system’s CD or DVD drive.

Can I access network shares on Windows XP?

In addition to receiving the actual desktop GUI, you can access network shares and printers as if seated at the PC. While remote users can request help using Windows XP’s Remote Assistance feature, often administrators must update settings and make configuration changes to remote machines.

What happens if you log into a remote desktop?

you log in remotely using Remote Desktop, then the console session is. disconnected. Conversely if you log into the console then any remote. session will be disconnected. The good news is that if you log in using. the same account applications remain running and you can effectively.

Does Windows XP Pro have remote desktop?

Windows XP Pro includes functionality to access the computer's desktop across a network. Remote Desktop must be enabled and configured properly.

Can I use remote desktop across the internet?

remote-desktop to the boot sequence or to change BIOS settings. As I mentioned earlier, you can happily use remote desktop across. the internet as long as the server is not protected by a firewall such as. a broadband router.

How to use Remote Desktop on Windows 10?

Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...

How to connect to a remote desktop?

Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How to check if Windows 10 Home is remote?

To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.

How to enable remote desktop access to a computer?

To enable connections to a computer with Windows Remote Desktop, you must open the System Properties settings (accessible via Settings (W11) or Control Panel) and allow remote connections via a particular Windows user.

How to access remote computer?

There are a couple of ways to access the remote computer. If you logged in to your account in the host program, then you have permanent access which means you can visit the link below to log in to the same account in a web browser to access the other computer.

How to connect to a host browser?

To connect to the host browser, sign on to Chrome Remote Desktop through another web browser using the same Google credentials or using a temporary access code generated by the host computer.

How does remote utility work?

It works by pairing two remote computers together with an Internet ID. Control a total of 10 computers with Remote Utilities.

What is the other program in a host?

The other program, called Viewer, is installed for the client to connect to the host. Once the host computer has produced an ID, the client should enter it from the Connect by ID option in the Connection menu to establish a remote connection to the other computer.

What is the easiest program to use for remote access?

AeroAdmin is probably the easiest program to use for free remote access. There are hardly any settings, and everything is quick and to the point, which is perfect for spontaneous support.

What is the name of the program that allows you to access a Windows computer without installing anything?

Install a portion of Remote Utilities called Host on a Windows computer to gain permanent access to it. Or o just run Agent, which provides spontaneous support without installing anything—it can even be launched from a flash drive.